Replacement Backspacer for your Chris Reeve knife.
Here you have the choice between the three different versions of the CRK backspacer. Please note the different sizes for the models Inkosi and Sebenza 21/31.
Umnumzaan
The backspacer (similar to the Sebenza 21/31) is slid onto the matching pin and screwed to the side. If you want to use your Umnumzaan without the included lanyard, you can simply install a second Backspacer.
Sebenza 21/31 small & large
Here the backspacer is slid over the matching pin. You have the choice between the silver or blue version. Due to the large diameter of the backspacer, the lanyard hole can not be provided with a second spacer as with the Umnumzaan.
Inkosi small & large
Unlike the other models, the Inkosi is a one-piece standoff made of stainless steel, which is screwed on both sides. The wide cutout in the middle of the standoff also serves as a receptacle for the lanyard.
Made of butter soft calfskin. The inner dimensions fit around Chris Reeve knife like a glove.
Without fastening material, belt loop or snap fasteners. So it glides into most of your shirt and trouser pockets without additional volume.Made in USA and sewn by hand.
Available in two sizes:Large (14,6 cm x 6,03 cm) fits for: Large Sebenza 21 Large Inkosi Umnumzaan
Small (12,06 cm x 5,08 cm) fits for: Small Sebenza 21 Small Inkosi TiLock Mnandi
Chris Reeve Screw Kit
All body screws including tools as a kit.
However not included: Pivot screw and pin for Umnumzaan and Inkosi.Stainless steelKey: Wiha Made in Germany
Chris Reeve Mnandi Box Elder Lefthand
Chris Reeve Mnandi - Pure elegance
The Chris Reeve Mnandi bears its name not without reason: translated into English, "Mnandi" means something like "pretty" or "beautiful". But this knife is not just a nice looking accessory - despite its small size you get here a full-fledged and very versatile pocket knife.
Like all almost Chris Reeve knives, the Mnandi is equipped with the Integral Lock, which neatly locks the blade when open.
Above the two titanium scales is the real highlight of this little gentleman folder: the handle inlays made of stabilized precious wood are a total eye-catcher. The wood pieces have been sanded to seamlessly embed themselves into the titanium, making the Mnandi a real pleasure to hold.
As with all other Chris Reeve knives, the blade uses CPM S45VN steel, which performs exceptionally well.
Despite its short length, this small men's knife does great in everyday use and is an absolutely serious cutting tool. The pocket clip, decorated with Art Deco elements, reminds a bit of an old tie pin and again underlines the noble look of the Mnandi.
Alternatively, you can carry your Mnandi in the included leather pouch.
On some days, a large, tactical-looking titanium folder may not be the right thing. This is exactly where the Mnandi makes its grand entrance.Whether with a suit, sports jacket or casual summer outfit, the Chris Reeve Mnandi is a companion that is both a handsome accessory and a functional cutting tool.
Mnandi Clip Replacement Screw
Clip replacement screw
Made in USA
If you like to wear your Mnandi without a clip. Just loosen the clip and screw in this replacement screw.
Chris Reeve Body Pin und Screw im Set
notwendig für dein Sebenza 31 wenn du den Knife Lounge Exclusive Backspacer verbauen möchtest
wird nur für das 31 Modell benötigt
Chris Reeve Loctite
Loctite 222MS Threadlocker
Made in the USA
ca. 6 ml
Made to hold rather than fasten, our lighter formula Loctite will help your body screws maintain true position, while still allowing you to break the hold as needed.
Sebenza 31 -
available in Large or Small
Reeve Integral Lock with ceramic ball on lockbar
Blade steel: CMP S35 VN
Clip Design: Off-set (on the 31 the clip now sits diagonally and no longer straight)
When the end of the Sebenza 21 was proclaimed in June 2019 and its successor, the Sebenza 31, was introduced, this news went through the knife scene like a drumbeat. After all, new introductions of the manufacturer from Idaho are already very rare. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.
First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye.
Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar.
In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series.
Small or Large?
Just like the predecessor model, both sizes are still available.
While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form.
Accessories:
Chris Reeve Clip Insert and Screw
Chris Reeve Backspacer
Chris Reeve Body Screw Kit
Chris Reeve Pocket Clip
Chris Reeve Grease
Chris Reeve Body Screw
Chris Reeve Lanyard classic for Sabenza and Umnumzaan
Lanyard Pin
Chris Reeve Replacement Pocket Clip for Impinda
Replacement clip and screw for your Chris Reeve Impinda (knife not included)
machined from solid titanium
Chris Reeve Logo Patch
PVC patch with Chris Reeve logo
with velcro backside for attaching to fluffy surfaces like caps, backpacks or patch walls
diameter: 4 cm
Chris Reeve Green Beret
Chris Reeve and William W. Harsey design
with Micarta handle
with black cerakote
with black or coyote brown nylon sheath
with or without blade serrations
Chris Reeve Body Screw
Single screw for the bolster of your Chris Reeve knife.For the models:
Small Sebenza 21 and 31 (5 - 40 x 250).
Large Sebenza 21, 31 and Umnumzaan (6 - 32 x 19/64")
Large Inkosi and Small Inkosi
Chris Reeve Small Sebenza 21 Lanyard with Bead
Knotted lanyard for the Small Sebenza 21 with spacer bead.Total length approx. 5,8 cmMaterial: Paracord, Titanium
Sebenza 31 Lefthand
available in Large or Small
Reeve Integral Lock with ceramic ball on the lockbar
Blade steel: CPM S35 VN
Clip Design: Off-set (on the 31 the clip is now diagonal and no longer straight)
Actually, the Large Sebenza 31 should be available from the end of October. Unfortunately the delivery is delayed.
Chris Reeve is so busy that they are behind schedule. I'm afraid we won't get the Sebenza 31 until 2020. :(
When the end of the Sebenza 21 was proclaimed in June 2019 and its successor, the Sebenza 31, was introduced, this news went through the knife scene like a drumbeat. After all, new introductions of the manufacturer from Idaho are already very rare. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.
First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye.
Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar.
In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series.
Accessories:
Chris Reeve Clip Insert and Screw
Chris Reeve Backspacer
Chris Reeve Body Screw Kit
Chris Reeve Pocket Clip
Chris Reeve Grease
Chris Reeve Body Screw
Chris Reeve Lanyard classic for Sabenza and Umnumzaan
Lanyard Pin
