Chris Reeve Lanyard mit Pin

Chris Reeve Sebenza 31 Canvas Micarta black

Chris Reeve Sebenza 31 Canvas Micarta black available in Large or Small Micarta inlay on the front and back Clip sits slightly diagonal on the 31 Ceramic Ball Detent Of course there is also a model with inlays for the Sebenza 31 besides the "Plane Jane". Two versions are currently available, one with Natural Canvas Micarta and the variant presented here in Black Micarta. While the rear Micarta inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Micarta inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Body Screw Chris Reeve Lanyard classic for Sabenza and Umnumzaan Lanyard Pin

€630.00

Details

Chris Reeve Sebenza 31 Canvas Micarta black

Chris Reeve Sebenza 31 Canvas Micarta black available in Large or Small Micarta inlay on the front and back Clip sits slightly diagonal on the 31 Ceramic Ball Detent Of course there is also a model with inlays for the Sebenza 31 besides the "Plane Jane". Two versions are currently available, one with Natural Canvas Micarta and the variant presented here in Black Micarta. While the rear Micarta inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Micarta inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Body Screw Chris Reeve Lanyard classic for Sabenza and Umnumzaan Lanyard Pin

€630.00

Details

Chris Reeve Sebenza 31 Left Handed

Chris Reeve Sebenza 31 Left Handed Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Please note:The photos are of the Large version in each case..

€595.00

Details

Chris Reeve Sebenza 31 Glass Blast

The iconic classic in a glass-blasted finish. Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Glassblast vs. SandblastWondering what the difference is between glass-blasted and sandblasted? The glass-blasted finish uses crushed glass, resulting in a finer, tighter grit that is extremely scratch-resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy surface that ages with character.

Variants from €565.00

€655.00

Details

Chris Reeve Sebenza 31 Glass Blasted Double Lug

with thumb stud on both sides Titanium Surface with fine glass blast finish Reeve Integral Lock with ceramic ball on lockbar Blade steel: Magnacut

€595.00

Details

Chris Reeve Sebenza 31 Glass Blast Lefthand

The iconic classic in a glass-blasted finish and Lefthand Version Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Glassblast vs. SandblastWondering what the difference is between glass-blasted and sandblasted? The glass-blasted finish uses crushed glass, resulting in a finer, tighter grit that is extremely scratch-resistant and smooth, but still retains its grip. Sandblasted, on the other hand, uses sand to create an extra grippy surface that ages with character.

Variants from €565.00

€655.00

Details

Chris Reeve Sebenza 31

Sebenza 31 Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Please note:The photos are of the Large version in each case..

Variants from €510.00

€595.00

Details

Chris Reeve Lanyard classic for Sebenza and Umnumzaan

Chris Reeve classic lanyard

Danger

Chris Reeve Lanyard classic for Sebenza and Umnumzaan

Chris Reeve classic lanyard

Login

Danger