It's Drop Day


Luft USA - LTL Acidwashed & Richlite
Compact pocket knife with Richlite handle scales.Made in the USA – in very small quantities.Blade steel: CPM-S45VNIncludes 3D-printed sheath with pre-mounted Ulti-Clip (can also be mounted on the opposite side if required).Luft Concepts LTL  After two years of work, it's finally here: the first Luft USA Fixed. While Jake and Ryan's knives were previously produced mainly in China, the LTL Fixed is the first model to be produced entirely in the USA. The blade is made of CPM S45-VN t, a high-end powder metallurgical steel from Crucible that was specially developed for the EDC and outdoor sector. CPM S45-VN combines high edge retention with very good corrosion resistance and toughness - an all-round steel without the typical compromises. A discreet fuller has been milled above the logo for visual finesse.  The blade thickness is approx. 3.2 mm, giving you enough stability for all possible or impossible tasks without compromising cutting performance. In the version with the acid wash finish, the blade has a black matt finish, which reduces reflections and gives the blade an interesting and somewhat organic look. The handle is made of Richlite, a sustainable paper-based fiber composite material that is lightweight, temperature-stable and extremely durable. If you want to clean the knife, you can simply loosen the handle scales thanks to the Torx screws. The special thing about these handle scales is that each one looks a little different, depending on how the raw material was cut. The scope of delivery includes a 3D printed sheath with drainhole, which is suitable for neck carry as well as horizontal or vertical carry (e.g. with UltiClip or TekLok, not included). An UltiClip is already fitted.

€349.00*
Luft USA - LTL Satin & Black Richlite
Compact pocket knife with Richlite handle scales.Made in the USA – in very small quantities.Blade steel: CPM S45-VNIncludes 3D-printed sheath with pre-mounted Ulti-Clip (can also be mounted on the opposite side if required).Luft Concepts LTL    After two years of work, it's finally here: the first Luft USA Fixed. While Jake and Ryan's knives were previously produced mainly in China, the LTL Fixed is the first model to be produced entirely in the USA. The blade is made of CPM S45VN, a high-end powder metallurgical steel from Crucible that was specially developed for the EDC and outdoor sector. CPM-S45VN combines high edge retention with very good corrosion resistance and toughness - an all-round steel without the typical compromises. A discreet fuller has been milled above the logo for visual finesse.   The blade thickness is approx. 3.2 mm, giving you enough stability for all possible or impossible tasks without compromising cutting performance. In the version with the acid wash finish, the blade has a black matt finish, which reduces reflections and gives the blade an interesting and somewhat organic look. The handle is made of Richlite, a sustainable paper-based fiber composite material that is lightweight, temperature-stable and extremely durable. If you want to clean the knife, you can simply loosen the handle scales thanks to the Torx screws. The special thing about these handle scales is that each one looks a little different, depending on how the raw material was cut.   The scope of delivery includes a 3D printed sheath with drainhole, which is suitable for neck carry as well as horizontal or vertical carry (e.g. with UltiClip or TekLok, not included). An UltiClip is already fitted.

€349.00*
Luft USA - LTL Stonewashed & Richlite
Compact pocket knife with Richlite handle scales.Made in the USA – in very small quantities.Blade steel: CPM S45-VN Includes 3D-printed Kydex  with pre-mounted Ulti-Clip (can also be mounted on the opposite side if required).Luft Concepts LTL   After two years of work, it's finally here: the first Luft USA Fixed. While Jake and Ryan's knives were previously produced mainly in China, the LTL Fixed is the first model to be produced entirely in the USA. The blade is made of CPM S45-VN , a high-end powder metallurgical steel from Crucible that was specially developed for the EDC and outdoor sector. CPM S45-VN combines high edge retention with very good corrosion resistance and toughness - an all-round steel without the typical compromises. A discreet fuller has been milled above the logo for visual finesse.   The blade thickness is approx. 3.2 mm, giving you enough stability for all possible or impossible tasks without compromising cutting performance. In the version with the acid wash finish, the blade has a black matt finish, which reduces reflections and gives the blade an interesting and somewhat organic look. The handle is made of Richlite, a sustainable paper-based fiber composite material that is lightweight, temperature-stable and extremely durable. If you want to clean the knife, you can simply loosen the handle scales thanks to the Torx screws. The special thing about these handle scales is that each one looks a little different, depending on how the raw material was cut.   The scope of delivery includes a 3D printed sheath with drainhole, which is suitable for neck carry as well as horizontal or vertical carry (e.g. with UltiClip or TekLok, not included). An UltiClip is already fitted.

€349.00*
Griffin Phoenix Bit Driver
Version: Titan Satin
High-quality bit driver with luminescent replaceable inlay Supplied with two T8 bitsone bit is stowed away in the handle made in Canada The Phoenix Bit Driver by Griffin Co. isn’t just a high-quality tool – it’s a true innovation. Its clever design allows it to split into two separate drivers, making it perfect for handling free-spinning knife pivots that require a bit driver on both sides.Smart Construction – meticulously crafted in Canada and built to last for generations.Customizable – the center insert is removable and can be replaced with optional glow barrels (available in brass and titanium). The Ultem version comes with an Aqua glow insert and four additional color options.Practical Features – magnetic bit retention, a spinning bearing top cap for effortless use, and a precisely milled grip area for optimal handling.Compatibility – fits ¼” hex bits and has built-in storage for one bit inside the driver.Complete Set – includes two Wiha T8 bits, a pouch, cleaning cloth, stickers, and a signed certificate of authenticity.Whether for knife maintenance or precision mechanics, the Phoenix Driver sets a new standard in functionality and design. The Phonix Bit Driver is supplied with the following inserts:- Satin Ti: Purple - Aged Ti: Invisible Aqua - Tumbled Ti: Blue - Aged Brass: Yellow - Ultem: Invisible Aqua (and others)

Variants from €163.00*
€179.00*
Griffin Phoenix Bit Driver
Version: Ultem
High-quality bit driver with luminescent replaceable inlay Supplied with two T8 bitsone bit is stowed away in the handle made in Canada The Phoenix Bit Driver by Griffin Co. isn’t just a high-quality tool – it’s a true innovation. Its clever design allows it to split into two separate drivers, making it perfect for handling free-spinning knife pivots that require a bit driver on both sides.Smart Construction – meticulously crafted in Canada and built to last for generations.Customizable – the center insert is removable and can be replaced with optional glow barrels (available in brass and titanium). The Ultem version comes with an Aqua glow insert and four additional color options.Practical Features – magnetic bit retention, a spinning bearing top cap for effortless use, and a precisely milled grip area for optimal handling.Compatibility – fits ¼” hex bits and has built-in storage for one bit inside the driver.Complete Set – includes two Wiha T8 bits, a pouch, cleaning cloth, stickers, and a signed certificate of authenticity.Whether for knife maintenance or precision mechanics, the Phoenix Driver sets a new standard in functionality and design. The Phonix Bit Driver is supplied with the following inserts:- Satin Ti: Purple - Aged Ti: Invisible Aqua - Tumbled Ti: Blue - Aged Brass: Yellow - Ultem: Invisible Aqua (and others)

€163.00*
Griffin Phoenix Bit Driver
Version: Brass Aged
High-quality bit driver with luminescent replaceable inlay Supplied with two T8 bitsone bit is stowed away in the handle made in Canada The Phoenix Bit Driver by Griffin Co. isn’t just a high-quality tool – it’s a true innovation. Its clever design allows it to split into two separate drivers, making it perfect for handling free-spinning knife pivots that require a bit driver on both sides.Smart Construction – meticulously crafted in Canada and built to last for generations.Customizable – the center insert is removable and can be replaced with optional glow barrels (available in brass and titanium). The Ultem version comes with an Aqua glow insert and four additional color options.Practical Features – magnetic bit retention, a spinning bearing top cap for effortless use, and a precisely milled grip area for optimal handling.Compatibility – fits ¼” hex bits and has built-in storage for one bit inside the driver.Complete Set – includes two Wiha T8 bits, a pouch, cleaning cloth, stickers, and a signed certificate of authenticity.Whether for knife maintenance or precision mechanics, the Phoenix Driver sets a new standard in functionality and design. The Phonix Bit Driver is supplied with the following inserts:- Satin Ti: Purple - Aged Ti: Invisible Aqua - Tumbled Ti: Blue - Aged Brass: Yellow - Ultem: Invisible Aqua (and others)

Variants from €163.00*
€179.00*
Griffin Phoenix Bit Driver
Version: Titan Blasted & Tumbled
High-quality bit driver with luminescent replaceable inlay Supplied with two T8 bitsone bit is stowed away in the handle made in Canada The Phoenix Bit Driver by Griffin Co. isn’t just a high-quality tool – it’s a true innovation. Its clever design allows it to split into two separate drivers, making it perfect for handling free-spinning knife pivots that require a bit driver on both sides.Smart Construction – meticulously crafted in Canada and built to last for generations.Customizable – the center insert is removable and can be replaced with optional glow barrels (available in brass and titanium). The Ultem version comes with an Aqua glow insert and four additional color options.Practical Features – magnetic bit retention, a spinning bearing top cap for effortless use, and a precisely milled grip area for optimal handling.Compatibility – fits ¼” hex bits and has built-in storage for one bit inside the driver.Complete Set – includes two Wiha T8 bits, a pouch, cleaning cloth, stickers, and a signed certificate of authenticity.Whether for knife maintenance or precision mechanics, the Phoenix Driver sets a new standard in functionality and design. The Phonix Bit Driver is supplied with the following inserts:- Satin Ti: Purple - Aged Ti: Invisible Aqua - Tumbled Ti: Blue - Aged Brass: Yellow - Ultem: Invisible Aqua (and others)

Variants from €163.00*
€179.00*
Griffin Phoenix Bit Driver
Version: Titan Aged
High-quality bit driver with luminescent replaceable inlay Supplied with two T8 bitsone bit is stowed away in the handle made in Canada The Phoenix Bit Driver by Griffin Co. isn’t just a high-quality tool – it’s a true innovation. Its clever design allows it to split into two separate drivers, making it perfect for handling free-spinning knife pivots that require a bit driver on both sides.Smart Construction – meticulously crafted in Canada and built to last for generations.Customizable – the center insert is removable and can be replaced with optional glow barrels (available in brass and titanium). The Ultem version comes with an Aqua glow insert and four additional color options.Practical Features – magnetic bit retention, a spinning bearing top cap for effortless use, and a precisely milled grip area for optimal handling.Compatibility – fits ¼” hex bits and has built-in storage for one bit inside the driver.Complete Set – includes two Wiha T8 bits, a pouch, cleaning cloth, stickers, and a signed certificate of authenticity.Whether for knife maintenance or precision mechanics, the Phoenix Driver sets a new standard in functionality and design. The Phonix Bit Driver is supplied with the following inserts:- Satin Ti: Purple - Aged Ti: Invisible Aqua - Tumbled Ti: Blue - Aged Brass: Yellow - Ultem: Invisible Aqua (and others)

Variants from €163.00*
€179.00*
Griffin Phoenix Driver Inlays
Version: Red
Inlay for you Phoenix DriverDoes not fit to the Ultem Bit Driver

€10.00*

WESN X Raven the Pirate Raven's Bornas

Drop: 25. Januar 17:00 Uhr

SALE

Bestech Exploit 
Blade Finish / Handle Material: Satin / Titanium
Bestech Exploit Toddknifeandtool design Titanium handle  Blade from S35VN

€209.60* €262.00* (20% saved)
Bestech Exploit 
Blade Finish / Handle Material: Blackwash / Bronze Blackwasch
Bestech Exploit Toddknifeandtool design Titanium handle  Blade from S35VN

€209.60* €262.00* (20% saved)
Bestech Knives Cetus Titanium Bronze Swirl
Bestech Knives Cetus Titanium Bronze SwirlPoltergeistworks Design Titanium handle with Carbonfiber inlay Blade made of M390 with Black PVD & Satin finish

€276.00* €345.00* (20% saved)
Bestech Knives Cetus Titanium White Swirl
Bestech Knives Cetus Titanium White SwirlPoltergeistworks Design Titanium handle with Carbonfiber inlay Blade made of M390 with Black PVD & Satin finish

€276.00* €345.00* (20% saved)
Bestech Tardis Black
Version: black
Bestech Tardis BlackHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestech Tardis Black and Purple
Version: Black and Purple
Bestech Tardis Black and PurpleHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestech Tardis Black and Sky Blue
Version: Black and Sky Blue
Bestech Tardis Black and Sky BlueHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestech Tardis Blue
Version: Blue
Bestech Tardis BlueHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestech Tardis OD Green
Version: OD Green
Bestech Tardis OD GreenHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestech Tardis Purple
Version: Purple
Bestech Tardis PurpleHandle in G10 D2 blade with satin and black DLC finish

€55.20* €69.00* (20% saved)
Bestechmann Goodboy Black G10
Version: Black G10
Bestechmann Goodboy Black G10 Keanu Alfaro Design Handle made of G10 Blade from D2

€47.44* €59.30* (20% saved)
Bestechmann Goodboy Blue G10
Version: Grey DLC / Blue G10
Bestechmann Goodboy Blue G10 Keanu Alfaro Design Handle made of G10 Blade from D2

€47.44* €59.30* (20% saved)
Bestechmann Goodboy Ice Cream Blue G10
Version: Grey DLC / Ice Cream Blue G10
Bestechmann Goodboy Ice Cream Blue G10Keanu Alfaro Design Handle made of G10 Blade from D2

€47.44* €59.30* (20% saved)
Bestechmann Goodboy Purple G10
Version: DLC / Purple G10
Bestechmann Goodboy Purple G10Keanu Alfaro Design Handle made of G10 Blade from D2

€47.44* €59.30* (20% saved)
Bestechmann Goodboy Tiffany Blue G10
Version: Tiffany Blue G10
Bestechmann Goodboy Tiffany Blue G10Keanu Alfaro Design Handle made of G10 Blade from D2

€47.44* €59.30* (20% saved)
Böker Trapper Uno Jute Micarta Schwarz
Handle scales made of textured jute Micarta blade steel made of 440C including felt case Modern OldschoolTraditional design meets modern manufacturing. Böker's Trapper Uno is one of the absolute classics from the Solingen-based manufacturer and has made it to incredible fame, especially in the USA. This sturdy work knife has found its way into countless worker jeans and is a faithful companion from the ground up. In the new version with black jute micarta, Böker have opted for the Uno variant of the Trapper. This means that the rear brass bolster is omitted and the knife - according to today's demands on an EDC companion - is a lot lighter. The jute micarta has been ground smooth, making the Trapper Uno a real pleasure to hold. The bolsters are made of nickel silver and give the knife additional stability. For the blade, Böker rely on the proven 440C steel. If you fancy a classic design in a modern finish, the Trapper Uno Jute is the perfect choice.

€79.95* €99.95* (20.01% saved)
Civi Mini Sandbar Black G10
Civi Mini Sandbar Black G10 Eric Ochs Design Satin Finish G10 handle Nitro-V Blade Hollow grind

€71.40* €84.00* (15% saved)
CRKT BoltLiner
Ballpoint pen with stainless steel barrel including Schmidt MegaLine 4889M refill Opening: Bayonet mechanism

€39.00* €59.95* (34.95% saved)
CRKT Collet Pen
Ballpoint pen with aluminum barrel with tungsten carbide tip Cap with clip

€37.95* €69.95* (45.75% saved)
CRKT Forebear
Darril Caston Design Handle made from G10 Sheepfoot blades made from 12C27 with satin finish      - Rear blade: for small, precise work                                                                                         - Main blade: for powerful, rough tasks

€54.95* €99.95* (45.02% saved)
CRKT Jake
CRKT Jake Ken Onion Design gold anodized aluminum handle with G10 inlays 12C27 blade with jimpings

€90.00* €159.95* (43.73% saved)
CRKT Venandi
CRKT Venandi faithful everyday companion crowned handle with decorative rivets two-hand knife

€40.00* €49.95* (19.92% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Orange
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Bronze
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Grün
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Grau
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Blue
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Daedalus Knife Co. DKC-L1 Lab Front Flipper 
Handle Color: Black
Daedalus Knife Co. DKC-L1 Lab Front Flipper Justin Lundquist (Justin Lundquist Designs) and Evan Nicolaides (Esynx Knives) DesignAluminum handleClipPoint blade made of 154CM with Belt Satin or Black Stonewash finish The L1 Lab from Daedalus Knife Co. is the first knife from the joint brand of Justin Lundquist and Evan Nicolaides. For this debut, the two have reinterpreted an absolute classic of the knife world: the Remington 1306. This traditional knife is highly sought after among collectors and finding an original copy is not easy at all.The Lab (the name alludes to the labyrinth of King Minos) is basically a highly modern adaptation of the Remington. The handle is particularly striking, with the characteristic grip recesses and the curved handle end having been adopted. Instead of bone or horn, the Lab uses handle scales made of textured aluminum, whose grippy surface is a real experience. You also have a choice of six different color options.The clip point blade made of 154CM steel (incidentally Bob Loveless' favorite steel) has been given a belt satin finish, which gives the knife a modern touch. The long fuller and front flipper are typical of Justin Lundquist. The sturdy linerlock ensures the necessary safety when working. By the way, you don't necessarily have to open this knife with both hands: The discreet front flipper not only blends seamlessly into the design, but also offers a lot of fun.

€140.00* €175.00* (20% saved)
Fox Knives Libar Micarta
Micarta handle M390 blade with serrations on the back of the blade including leather case

€62.95* €96.95* (35.07% saved)
GiantMouse ACE Clyde Micarta green NEW
Version: Backspacer and thumb pin brass
GiantMouse Ace Clyde Micarta green     NEW: Brass backspacer and brass thumb pin     Ansø and Voxnaes Design     Elmax steel     Bronze Washers Clyde is here! With this knife, GiantMouse presents a really incredibly striking-looking model on which the two designers Jens Ansø and Jesper Voxnaes have worked for a really long time. Here, the most diverse influences flow together, which unite in a successful design. In addition to borrowings from European knives, you will also find elements of Japanese and Arabian blades, which give Clyde a unique appearance.  The handle is with equipped with green Micarta scales and a brass backspacer/thumb pin, which gives the knife a certain old-school charm and looks simply fabulous. The shape of the handle may remind you a bit of the classic Scandinavian Pukkos, but without copying them. The slightly sloping shape towards the back offers a great hand position, which makes this compact pocket knife very universal. Thanks to the generous recess in the handle, the liner lock is easy to unlock and very easy to use. The saber-ground blade has a nice upward sweep and is slightly reminiscent of a Persian-style blade. The steel used here is Elmax steel from Böhler, which is not only very cut-resistant, but also extremely insensitive to rust. This means that you can also process food without any problems, for example. To round off the overall package, Clyde was equipped with a deep-carry clip, so that the knife inconspicuously takes its place in your jeans. Basically, only one question remains: when is Bonnie coming?

€163.20* €192.00* (15% saved)
Kai Shun Classic White Brotmesser und Klingenschutz im Set
2-piece set with bread knife and matching blade guardBread knife with a blade length of 23 cm made from VG-Max steel with a hardness of 61 HRCin a bundle with a blade guard for safe transportationThis set is limited to 500 pieces!

€229.00* €253.85* (9.79% saved)
Kai Shun Classic White Santoku und Schleifstein im Set
2-piece set with Santoku and combination sharpening stoneSantoku with a blade length of 18 cm - winner of the German Design Award 2021Combination sharpening stone with 300/1000 gritOnly available for a limited time!

€225.00* €302.50* (25.62% saved)
Kai Shun Premier Kochmesser und Kochschürze im Set
2-piece set with Santoku (18 cm) and Tim Mälzer cooking apronSantoku with a blade length of 18 cm made of VG-Max steel with a hardness of 61 HRCin a bundle with cooking apron as a gift set for passionate chefsthis set is limited 

€239.00* €271.50* (11.97% saved)
Kai Shun Premier Santoku und Kochschürze im Set
2-piece set with Santoku (18 cm) and Tim Mälzer cooking apronSantoku with a blade length of 18 cm made of VG-Max steel with a hardness of 61 HRCin a bundle with cooking apron as a gift set for passionate chefsthis set is limited 

€229.00* €261.50* (12.43% saved)
MKM Edge Liner Black 
MKM Edge Liner Black aluminum handle blue anodized ring around the blade screw blade made of M390

€99.45* €169.95* (41.48% saved)
MKM Edge Liner Blue
MKM Edge Liner Bluealuminum handle blue anodized ring around the blade screw blade made of M390

€99.95* €169.95* (41.19% saved)
MKM Edge Liner Green
MKM Edge Liner Green aluminum handle blue anodized ring around the blade screw blade made of M390

€99.95* €169.95* (41.19% saved)
MKM Flame Drop Marble Carbon
MKM Flame Drop Marble CarbonMichael Zieba DesignDrop point blade made of M390 with satin finish Carbon Fiber handle with blue anodized clip and ring around the blade screw

€189.00* €270.00* (30% saved)
MKM Flame Drop Titanium 
MKM Flame Drop Titanium  Michael Zieba DesignDrop point blade made of M390 with stonewash finish Titanium handle with blue anodized clip and ring around the blade screw

€189.00* €270.00* (30% saved)
MKM Hero G10 Black
MKM Hero G10 Black Sturdy pocket knife with a backlock locking system A Tommaso Rumici design Titanium bolster and liner manufactured as a monoblock construction M390 steel Double sided thumb pin and convertible clip

€252.00* €315.00* (20% saved)
MKM Hero Micarta Natural
MKM Hero Micarta Natural Sturdy pocket knife with a backlock locking system A Tommaso Rumici design Titanium bolster and liner manufactured as a monoblock construction M390 steel Double sided thumb pin and convertible clip

€252.00* €315.00* (20% saved)
MKM Isonzo Black - Cleaver
MKM Isonzo Black - Cleaver Jesper Voxnaes design handy compact outdoor knife large eyelet in the back perfect to attach it to your equipment with a carabiner with Torx key 6/8

€85.00* €99.00* (14.14% saved)
MKM Isonzo Green - Hawkbill
MKM Isonzo Green - Hawkbill Jesper Voxnaes design handy compact outdoor knife large eyelet in the back perfect to attach it to your equipment with a carabiner with Torx key 6/8

€85.00* €99.00* (14.14% saved)
MKM Isonzo Titanium
Blade Shape: Hawkbill
MKM Isonzo Titanium M390 SteelTitanium ScalesThe MKM Isonzo Bronze Titanium is the premium version of the Isonzo, designed by the talented Jesper Voxnaes. With this knife you get a compact tool that has an impressive personality despite its size.The shape of the knife was inspired by the majestic river that flows through the Eastern Alps. The quality is of the highest standard and is made of a Bohler M390 stainless steel blade steel with a stonewashed finish.The handle is made of bronze anodized titanium and is equipped with a stainless steel convertible wire clip. The knife also has a titanium backspacer and an opening system with a thumb hole and ball bearing mechanism.  You'll also get a 6/8 Torx wrench and a nylon sheath with a zipper and belt loop to go with it. The MKM Isonzo Clippoint Bronze Titan Knife is a great companion for your outdoor adventures despite its small size.

€159.95* €250.00* (36.02% saved)
MKM Lov FRN All Black
MKM Lov FRN All BlackJesper Voxnaes design Handle made of FRN with fine texture Blade made of N690 blue anodized blade screw

€48.95* €81.00* (39.57% saved)
MKM Lov FRN Orange
MKM Lov FRN Orange Jesper Voxnaes design Handle made of FRN with fine texture Blade made of N690 blue anodized blade screw

€48.95* €81.00* (39.57% saved)
MKM Lov FRN Wolf Grey
MKM Lov FRN Wolf GreyJesper Voxnaes design Handle made of FRN with fine texture Blade made of N690 orange anodized blade screw

€48.95* €81.00* (39.57% saved)
MKM Maximo Bronze anodized Titanium
MKM Maximo Bronze anodized Titanium  Bob Terzuola design M390 steel Accent: bead blasted titanium ring around the bolt ballistic nylon sheath with zipper and belt loop included spare clip screw with rounded head included. Special wrench to remove glass breaker screw and knurled screw The Ultraharduseworker Knife MKM have teamed up with none other than the legendary Bob Terzoula for the Maximo, who has delivered this great design. Terzoula is the grandfather of the tactical folding knife, so to speak, and has created countless designs in addition to several books, inspiring a complete generation of knifemakers around the world. The Maximo is basically a typical Terzoula design. First of all, there's the straight handle, which is quite universal and offers plenty of room for both small and large hands. While the showside is available in various materials and finishes, the lockside is made of titanium. So that the weight is not too high, small pockets are milled on the inside of the handle scales, which will leave the whole thing a little lighter. To ensure that your Maximo locks reliably for a long time, the lockbar has been given a stainless steel insert that not only makes contact with the blade root, but also ensures that you can't overstretch the mechanism. At the end of the handle, you'll find a small glass breaker that also holds the deep-carry clip. For a little more grip, the Maximo has been given a milled fragpattern, which also looks great. The spearpoint blade made of Böhler's M390 powder steel can be opened either by the thumb studs on both sides or by the discreet flipper tab, which also ensures that your hand does not accidentally slip onto the cutting edge when the blade is open. The blade also clearly bears the signature of Bob Terzoula: while the tip is almost on the center axis of the knife, you will find the typically long Swedge on the back of the blade, which is so characteristic of Terzoula designs. As always with MKM manufacturing, the finish is of the highest level. All edges are beautifully broken and rounded, so this folder is incredibly comfortable and full in the hand. So you can use your Maximo also for harder cutting and outdoor tasks without any problems.

€229.00* €309.00* (25.89% saved)
MKM Maximo carbon fiber
MKM Maximo carbon fiber Bob Terzuola design M390 steel Accent: blue anodized titanium ring around the bolt ballistic nylon sheath with zipper and belt loop included spare clip screw with rounded head included. Special wrench to remove glass breaker screw and knurled screw The Ultraharduseworker Knife MKM have teamed up with none other than the legendary Bob Terzoula for the Maximo, who has delivered this great design. Terzoula is the grandfather of the tactical folding knife, so to speak, and has created countless designs in addition to several books, inspiring a complete generation of knifemakers around the world. The Maximo is basically a typical Terzoula design. First of all, there's the straight handle, which is quite universal and offers plenty of room for both small and large hands. While the showside is available in various materials and finishes, the lockside is made of titanium. So that the weight is not too high, small pockets are milled on the inside of the handle scales, which will leave the whole thing a little lighter. To ensure that your Maximo locks reliably for a long time, the lockbar has been given a stainless steel insert that not only makes contact with the blade root, but also ensures that you can't overstretch the mechanism. At the end of the handle, you'll find a small glass breaker that also holds the deep-carry clip. For a little more grip, the Maximo has been given a milled fragpattern, which also looks great. The spearpoint blade made of Böhler's M390 powder steel can be opened either by the thumb studs on both sides or by the discreet flipper tab, which also ensures that your hand does not accidentally slip onto the cutting edge when the blade is open. The blade also clearly bears the signature of Bob Terzoula: while the tip is almost on the center axis of the knife, you will find the typically long Swedge on the back of the blade, which is so characteristic of Terzoula designs. As always with MKM manufacturing, the finish is of the highest level. All edges are beautifully broken and rounded, so this folder is incredibly comfortable and full in the hand. So you can use your Maximo also for harder cutting and outdoor tasks without any problems.

€229.00* €310.00* (26.13% saved)
MKM Maximo Dark stonewashed Titanium
MKM Maximo Dark stonewashed Titanium Bob Terzuola design M390 steel ballistic nylon sheath with zipper and belt loop included spare clip screw with rounded head included. Special wrench to remove glass breaker screw and knurled screw The Ultraharduseworker Knife MKM have teamed up with none other than the legendary Bob Terzoula for the Maximo, who has delivered this great design. Terzoula is the grandfather of the tactical folding knife, so to speak, and has created countless designs in addition to several books, inspiring a complete generation of knifemakers around the world. The Maximo is basically a typical Terzoula design. First of all, there's the straight handle, which is quite universal and offers plenty of room for both small and large hands. While the showside is available in various materials and finishes, the lockside is made of titanium. So that the weight is not too high, small pockets are milled on the inside of the handle scales, which will leave the whole thing a little lighter. To ensure that your Maximo locks reliably for a long time, the lockbar has been given a stainless steel insert that not only makes contact with the blade root, but also ensures that you can't overstretch the mechanism. At the end of the handle, you'll find a small glass breaker that also holds the deep-carry clip. For a little more grip, the Maximo has been given a milled fragpattern, which also looks great. The spearpoint blade made of Böhler's M390 powder steel can be opened either by the thumb studs on both sides or by the discreet flipper tab, which also ensures that your hand does not accidentally slip onto the cutting edge when the blade is open. The blade also clearly bears the signature of Bob Terzoula: while the tip is almost on the center axis of the knife, you will find the typically long Swedge on the back of the blade, which is so characteristic of Terzoula designs. As always with MKM manufacturing, the finish is of the highest level. All edges are beautifully broken and rounded, so this folder is incredibly comfortable and full in the hand. So you can use your Maximo also for harder cutting and outdoor tasks without any problems.

€209.00* €310.00* (32.58% saved)
MKM Maximo Micarta Green
MKM Maximo Micarta Green Bob Terzuola design M390 steel Accent: bead blasted titanium ring around the bolt ballistic nylon sheath with zipper and belt loop included spare clip screw with rounded head included. Special wrench to remove glass breaker screw and knurled screw The Ultraharduseworker Knife MKM have teamed up with none other than the legendary Bob Terzoula for the Maximo, who has delivered this great design. Terzoula is the grandfather of the tactical folding knife, so to speak, and has created countless designs in addition to several books, inspiring a complete generation of knifemakers around the world. The Maximo is basically a typical Terzoula design. First of all, there's the straight handle, which is quite universal and offers plenty of room for both small and large hands. While the showside is available in various materials and finishes, the lockside is made of titanium. So that the weight is not too high, small pockets are milled on the inside of the handle scales, which will leave the whole thing a little lighter. To ensure that your Maximo locks reliably for a long time, the lockbar has been given a stainless steel insert that not only makes contact with the blade root, but also ensures that you can't overstretch the mechanism. At the end of the handle, you'll find a small glass breaker that also holds the deep-carry clip. For a little more grip, the Maximo has been given a milled fragpattern, which also looks great. The spearpoint blade made of Böhler's M390 powder steel can be opened either by the thumb studs on both sides or by the discreet flipper tab, which also ensures that your hand does not accidentally slip onto the cutting edge when the blade is open. The blade also clearly bears the signature of Bob Terzoula: while the tip is almost on the center axis of the knife, you will find the typically long Swedge on the back of the blade, which is so characteristic of Terzoula designs. As always with MKM manufacturing, the finish is of the highest level. All edges are beautifully broken and rounded, so this folder is incredibly comfortable and full in the hand. So you can use your Maximo also for harder cutting and outdoor tasks without any problems.

€179.00* €250.00* (28.4% saved)
MKM Timavo Carbon Fiber Black
MKM Timavo Carbon Fiber Black M390 steel satin blade finish Cordura sheath included

€245.00* €269.90* (9.23% saved)
MKM Timavo Green Micarta
MKM Timavo Green Micarta M390 steel Stonewashed blade finish  Cordura sheath included

€199.00* €219.90* (9.5% saved)
MKM Timavo Micarta Natural
MKM Timavo Micarta Natural M390 steel Stonewashed blade finish  Cordura sheath included

€199.00* €219.90* (9.5% saved)
MKM Vincent N690 Jade G10
MKM Vincent N690 Jade G10 textured G10 handle scales give you a secure grip  blade shape is inspired by pirate sabers Jesper Voxnae's design limited runArrrr, me hearties! Listen to the words that I proclaim here! Today I present you the MKM Vincent pocket knife, the jewel of every pirate! This little treasure combines the essence of times long past, when pirates roamed the seven seas, always accompanied by their precious blades. Aarrrrr! The MKM Vincent - the perfect blade shape you always want to have at your side! With an overall length of 175 mm (6.89")  and a blade length of 62 mm (2.44") , the MKM Vincent is compact and lightweight. The weight? Only 100 grams (3.33 oz)The blade is made of Bohler N690Co steel and a hardness of HRC 58/60, you will enjoy the sharpness for a long time. The Top Shield® blade surface protects against the vagaries of the sea and makes the MKM Vincent the perfect companion for any adventure. Aaarrrr! You can open the blade with the flipper or thumb hole, and the liner lock provides a secure lock. The textured G10 handle is non-slip in the hand, so you always keep control. The included nylon sheath protects your blade from wind and weather. This treasure was created by Jesper Voxnaes VOX and manufactured by the masters at MKM. Aaaarrrr, sailors! Don't wait any longer and get the MKM Vincent, the pocket knife for true pirates! ARRrrrr!

€106.00* €149.90* (29.29% saved)
MKM Vincent Vanax Purple Haze
MKM Vincent Vanax Purple HazePremium version of the MKM Vincent with FatCarbon handle scales and Vanax steel Blade shape is inspired by pirate sabers Jesper Voxnaes design limited runArrrr, sailors! Today I bring you a true gem from the world of pocket knives - the MKM Vincent! Inspired by the blades that once accompanied proud pirates on their adventures, the MKM Vincent is the pocket knife you'll always want to have with you!Aaarrrr! With an overall length of 175 mm and a blade length of 62 mm, the MKM Vincent is compact yet powerful. Despite its impressive strength, it weighs only 104 grams, making it as light as a pirate's plague! The blade made of VANAX SuperClean steel offers the highest quality. With a hardness of HRC 59/61, it is as sharp as a shark's tooth and as hard as a pirate captain's heart. The black (PVD) finish protects your blade from the vagaries of the sea, making the MKM Vincent the perfect companion for any adventure. Aaarrrr You can open the blade with the flipper or thumb hole, and the liner lock ensures a secure lock. The FAT Carbon handle in the "Purple Haze" color fits securely and comfortably in your hand, so you'll always be in control while you share your spoils. A durable nylon fabric sheath protects your blade from the elements. This masterfully crafted pocket knife was designed by legendary designer Jesper Voxnaes VOX and crafted by renowned manufacturer MKM in Maniago. Jesper's designs are known and loved around the world for their optimal hand position. Vincent is no exception. Arrrr, me hearties! Don't hesitate and get the MKM Vincent, the ultimate pocket knife for pirates and adventurers! Aarrrrr! VANAX Steel: Vanax steel is a modern, highly rust resistant, powder metallurgy steel developed by Uddeholm, a Swedish company. It is characterized by its exceptional corrosion resistance and wear resistance and is widely used for high quality knives and cutting tools.

€209.00* €299.00* (30.1% saved)
RGT Spyderco Shaman Handle Scales
Version: White Storm
RGT Spyderco Smock Shaman Handle Scales  Replacement scales for your Spyderco Smock made of Dark Matter Carbon Fiber  Made in the USA Please note that these scales are not suitable for left-handers. (Clip hole: Right hand tip up).

€151.00* €189.00* (20.11% saved)
Santoku "First Touch"
Santoku "First Touch" Blade material: 32-layer Damascus steel Handle material: laminated Pakka wood Grinding: double-sided Blade hardness: 61±1 HRC Application: Suitable for all purposes. The traditional Japanese all-purpose knife (Santoku) is the most popular knife in Japan. However, it is just as suitable for European cuisine. With only 14 cm blade length the perfect entry into the Japanese knife world.

€139.00* €183.00* (24.04% saved)
Urban EDC Copita
Handle Material: Green Micarta
Urban EDC Copita Jesper Voxnaes design compact flipper M390 blade available in brown micarta green Micarta titanium black PVD titanium The Copita is a Framelock flipper, but it was designed specifically for use in an urban environment. The knife may be really compact - but that does not detract from its use. Thanks to the elegantly curved belly of the blade, you still have a maximum of cutting power on only 5.7cm blade length. Otherwise, the Copita is a typical Voxnaes design: despite the overall somewhat squat shape, this little rattle radiates that typical elegance that is typical of Jesper's designs. A real highlight are the decorations of the screw collars: here was worked with great attention to detail. In total you have the choice between three different variants: - Micarta Natural/ Satin Finish blade- Green Micarta/ Stonewash blade- Titanium handle scales/ Satin Finish blade The frame side is milled out of titanium on all four versions. Of course the Copita comes with all the features that such a flipper must have: Ball bearings, M390 steel, steel insert, optically matching backspacers and a super modern design.

€229.00* €260.00* (11.92% saved)
Urban EDC Nessie
Handle Material: Green Micarta
Urban EDC Nessie Collaboration between Chris Taylor and Eric Luther Evolution of the popular Nessie slipjoint slim Kukri-inspired blade shape two-tone M390 blade (Stonewashed blade, Satin Flats) available in Jade G10 (with inner liner) Green Micarta (with inner lining) Brown Micarta Titanium Sharp Monster The Nessi is a collaboration between Chris Taylor, Eric Luther and Urban EDC Supply. While the handle (you can choose between titanium, micarta and jade G10) has a super hand position, but is otherwise deliberately kept quite neutral, you get a real eye-catcher with the blade made of M390: this very bulbous cutting tool is deliberately oriented to the shape of old Kukri machetes of the Guhrka soldiers from the 19th century. These huge knives were not only feared weapons, but also had a very unique shape. Of course, the Nessi is not such a weapon, but it makes use of the distinctive shape of these old machetes. The ball-bearing blade is opened by a flipper and locks with a super robust framelock. Of course with steel insert. Like all Urban EDC Supply knives, the Nessi comes with a nylon pouch.

Variants from €199.50*
€259.00* €285.00* (9.12% saved)
Vero Engineering Knife Poster - Impulse Mini
Vero Engineering Knife Poster - Impulse Mini 45,7cm x 61 cm (18 x 24") Design by Sam -- Ravent the Pirate and Impulse Mini Design by Vero Engineering The Three Amigos The story behind this poster is way too cool not to tell. Basically, it is a collaboration of three greats of the modern knife scene. First, there's Jospeh Vero, who got off to a whirlwind start on the knife scene with Vero Engineering. His thoughtful, always modern designs, his sense of aesthetics and the very high quality of his knives, have ensured a huge fan base at breakneck speed. Number two in the illustrious round is designer and photographer Sam aka. Raven The Pirate, who you've almost certainly come across on Instagram. Sam is a gifted artist (and a good friend of ASW) who manages to showcase knives and EDC gear in his own unique way. He doesn't use the latest camera technology or any other high-tech tools - most of his pictures are taken with a 10 year old Canon T3i and a simple flash that shoots against a wall. Here it becomes clear that it depends mainly on the eye and the craftsmanship of the photographer. Sam's pictures speak for themselves. Number three needs no further introduction: Ben Peterson is one of THE greats in the knife scene and became world famous via the Blade HQ YouTube channel. So what happens when these three guys team up for a poster? See for yourself. Sam has managed to beautifully showcase the individual parts of a Vero Engeneering Impulse Mini. The poster is printed on matte Topkote Premium paper at Peczuh Printing in Salt Lake City/ Utah. We ship each poster rolled in a special box so there are no creases.

€15.00* €29.00* (48.28% saved)
Victorinox Classic Color Leather Case
Color: Style Icon
Victorinox Classic Color Leather Case in 5 colors with strap suitable for small Victorinox pocket knives Dimension: 70 mm x 4 mm

€9.00* €15.00* (40% saved)
Victorinox Classic SD Alox Limited Edition 2023 Electric Yellow
Victorinox Classic SD Alox Limited Edition 2023 Electric Yellow Anodized aluminum handle scales Color: bright yellow The Alox Limited Edition is also available as the Pioneer and Hunter Pro.  The Classic has 5 functions: Small blade ScissorsNail file with screwdriver 2,5 mm Ring Dimensions:Height: 6mm Length: 58mm Weight: 16g

€34.40* €43.00* (20% saved)
Victorinox Classic SD Alox Limited Edition 2024 Terra Brown
Victorinox Classic SD Alox Limited Edition 2024 Terra Brown Anodized aluminum handle scales The Alox Limited Edition is also available as the Pioneer and Evoke The Classic has 5 functions: Small blade ScissorsNail file with screwdriver 2,5 mm Ring Dimensions:Height: 6mm Length: 58mm Weight: 16g

€34.40* €43.00* (20% saved)
Victorinox Evoke Alox Limited Edition 2024 Terra Brown
Victorinox Evoke Alox Limited Edition 2024 Terra Brown Handle scales made of anodized aluminumwith removable thumb studThe Alox Limited Edition is also available as Classic and PioneerThe Evoke has 4 functions: Large blade (one-handed opening) ClipFastening loopParacord pendant Dimensions:Height: 40 mmLength: 136 mmWeight: 186 g

€103.20* €129.00* (20% saved)
Viper Berus1 Jade G10 PVD
Viper Berus1 Jade G10 PVD Tommaso Rumici Design "Pockets Fixed" with Micarta handle scales with Kydex sheath and Ulti Clip M390

€139.00* €165.00* (15.76% saved)
Viper Berus2 Jade G10 PVD
Viper Berus2 Jade G10 PVD Tommaso Rumici Design PVD blade finish Micarta handle with Kydex sheath

€139.00* €165.00* (15.76% saved)
Viper Berus2 Natural Micarta PVD
Viper Berus2 Natural Micarta PVD Tommaso Rumici Design PVD blade finish Micarta handle with Kydex sheath

€139.00* €165.00* (15.76% saved)
Viper Katla Stonewashed Titanium 3D
Viper Katla Stonewashed Titanium 3D Solid EDC knife with pocket clip Jesper-Voxnaes-Design titanium handle and M390 blade with 3D CNC details Hot like a volcano The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point. The handle is equipped with titanium scales, finished with a stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs. The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.

€199.00* €211.00* (5.69% saved)
Viper Oniro 
Handle Material: Micarta Green
Viper Oniro Denis Simonutti Design Handle made of canvas micarta Magnacut blade

€172.00* €195.95* (12.22% saved)

Hello from Hamburg & welcome to the Knife Lounge

We are all about knives, EDC gear and a passion for high-quality accessories. Whether you are looking for a practical everyday carry tool, a collector's item that will make your heart beat faster or just want to browse - here you will find quality, great products and a real community. Have fun discovering!

Our top categories

Whatever you are looking for, we have it: pocket knives, fixed-blade knives, handmade collector's items and exclusives as well as great EDC knives and tools that make your EDC even more individual.

Pocket knives

Fixed knives

Pens & Ballpoints

EDC

Exclusives

Scales

Soon and Now

Whether eagerly awaited product drops or brand new releases - here you can see at a glance what has just arrived, exclusive product drops and a look at our upcoming highlights.

Selected manufacturers

Proven classics and new designs: In our shop you will discover knives and accessories from leading manufacturers who work with perfect craftsmanship and often look back on decades of experience. Here is a selection of manufacturers whose knives you can discover in our store.

Our highlights

Whether exclusive collector's items or practical knives for everyday use - here you will find a small selection of knives that will make everyone's heart beat faster. Browse through our highlights and discover the knife that suits you perfectly or that you can use to make others happy..

Atlas Black Stonewash Brass
Boker Plus Atlas Stonewash Brassminimalistic constructionrobusthandysuitable for everyday use

€26.95*
Böker Barlow BFF
Böker Barlow BFF Lucas Burnley Design fixed EDC handle material: walnut with hollow rivets with leather sheath Best Friends Forever? No, of course the abbreviation BFF does not stand for this romantic idea of eternal friendship. Rather, "Barlow Frontpocket Fixed" should be meant here - at least this describes this compact fixed absolutely precisely. Here you get a pocket knife in the true sense of the word - just not for folding. The design of the BFF comes from none other than Lucas Burnley, who now has numerous designs of his knives produced by Böker. The handle of the BFF is so universally shaped that both small and somewhat larger hands can easily find room here. Only if you have exceptionally large paws, it could possibly be tight here. The walnut wood gives a great visual contrast to the brass pins. If you want to attach a bead, you can do so thanks to the large hollow rivet at the end of the handle. For the steel for the full-length blade, Böker have chosen AEB-L this time. This stainless alloy was originally used for the production of razor blades and takes on an incredible sharpness. The saber grind of the blade and the small swedge towards the tip, give the blade a look that is somewhat reminiscent of the knives from the colonial era of the USA - only in a handy pocket size. To make the BFF live up to its name, Böker have designed a leather sheath that you can "clip" to the hem of a jeans pocket thanks to a steel clip. So this little everyday companion is always within reach when you need it.

€162.95*
Böker BFF Packlite 
Böker BFF Packlite Lucas Burnley design  Steel handle with weight-reducing recesses DropPoint blade made from MagnaCut with stonewash finish Includes Kydex sheath and ball chain

€99.95*
Böker BFF Packlite 
Böker BFF Packlite Lucas Burnley design  Steel handle with weight-reducing recesses DropPoint blade made from MagnaCut with stonewash finish Includes Kydex sheath and ball chain

€119.95*
Böker BFF Packlite Scales Walnut wood
scales for the BFF Packlite made from Walnut woodincluding screwsneeds extra Kydexsheath

€39.95*
Böker Bronco
Böker Bronco Outdoor knife CPM steel blade Droppoint blade handle made of TPE (low heat conductivity) including high quality quiver Kydex Bronco The new Böker Bronco is THE price/performance hit when it comes to a super sturdy, rather compact outdoor knife. This knife is made of the ultra-tough but very cutting CPM 3V steel, which is one of the most popular alloys when the blade must withstand even the roughest loads. The blade was nevertheless ground so thin that in addition to the stability also very good cutting properties are given. At the front part of the blade back was ground an extremely sharp-edged 90 degree angle, with which you can effortlessly scribe the supplied fire steel. For the handle, Böker have opted for an injected TPE handle, which is simply fabulous in the hand and thanks to its texture is still safe to grip even with wet hands. Thanks to the comparatively low weight, the Böker Bronco is an all-around perfect companion in the forest or on a hike. Included is a leather sheath, including a dengler. The knife is of course manufactured entirely in Böker's factory in Solingen. Translated with www.DeepL.com/Translator (free version)

€110.95*
Böker Coffin Jute Micarta
Chuck Gedraitis designcoffee brown Micarta handleDropPoint MagnaCut blade with decorative ricassoincludes felt caseMade in SolingenBöker Coffin Denim Micarta: Your new favorite knife from Solingen. Direct from the legendary Böker manufactory in Solingen - this is German craftsmanship at its best. Tradition meets coolness.The design? Absolutely casual! Thanks to Chuck Gedraitis, the knife combines stylish elegance with a good dose of coolness. The jean-blue, coffin-shaped Micarta handle shell is not only mega in the hand, but also looks damn good.MagnaCut steel: Sharpness that inspires. And the blade? A real stunner. The powder metallurgy MagnaCut steel is so sharp, you'll be slicing everything from apples to rope in no time. With a hardness of 62-63 HRC makes you this knife so quickly no one something. Features you'll love. The slipjoint pocket knife with its 90 degree stop is super handy. And the nail hammer? Not only practical, but also a cool detail that combines the old and the new. The convertible stainless steel clip ensures that the knife disappears almost invisibly in your pocket. Mega practical, right? The Böker Coffin is a perfect knife cocktail of Solingen craftsmanship mixed with modern flair.

€164.95*
Böker Daily Knives AK1 American Tanto
Böker Daily Knives AK1 American TantoBudget-friendly version made of N690 steelG10 handle scalesWith Kydex sheath and clipMade in the Boker manufactory in Solingen

€154.95*
Böker Daily Knives AK1 American Tanto Ultem
Böker Daily Knives AK1 American Tanto UltemUltem handle scalesAmerican Tanto Blade made of MagnacutWith Kydex sheath and clipMade in the Boker manufactory in Solingen

€275.00*
Böker Daily Knives AK1 Droppoint Richlite Redstone
Böker Daily Knives AK1 Droppoint Richlite Redstone in cooperation with Alex Kremer and Daily Customs versatile small everyday knife short droppoint blade made of powder metallurgy RWL 34 handle made of richlite handle can be easily removed with the included Torx wrench and replaced with a variety of alternative scales lanyard loop can be hidden in the handle Comes with a high quality black leather sheath with a sewn-in Ulticlip. handmade in the Böker knife manufactory Solingen

€241.00*

EDC - Every Day Carry

With our large selection of knives, practical pens, tools and exclusive accessories, you can tailor your EDC perfectly to your needs.

CRKT Collet Pen
Ballpoint pen with aluminum barrel with tungsten carbide tip Cap with clip

€37.95* €69.95* (45.75% saved)
CRKT BoltLiner
Ballpoint pen with stainless steel barrel including Schmidt MegaLine 4889M refill Opening: Bayonet mechanism

€39.00* €59.95* (34.95% saved)
Ruhrpott Outdoor Patch "Laboe ist fällig"
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attaching to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "Fuck your Feelings"
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attaching to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "Eat Sleep EDC Repeat" Color
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attaching to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "What does not kill you"
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attaching to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "Eat Sleep EDC Repeat" Blackout
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attaching to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "Besser noch'n Messer" 2.0
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attachment to Velcro surfaces6,3 x 1,5 cm

€12.90*
Ruhrpott Outdoor Patch "Set Fire"
Ruhrpott Outdoor fan patchRubber patch with Velcro backing for attachment to Velcro surfaces2,5 x 2,5 cm

€11.00*
Ruhrpott Outdoor Patch "No Safe Queens inside"
Rubberpatch mit Velcro Rückseite zur Anbringung an Klettflächen Ruhrpott Outdoor Fanpatch 5 x 2,5cm

€12.90*

All the latest news straight to your inbox

With our newsletter, we keep you up to date and provide you with exclusive product recommendations, brand new releases, exciting insights and really good offers.

Sign up now - simply enter your e-mail address and send. You're done.

Subscribe to newsletter

Blog about knives, accessories and Everyday Carry

Interesting, inspiring and practical information about knives and EDC: Our blog is the place where you can find out about the latest trends, care tips and exciting background stories.

Perfect for anyone who wants to deepen their passion for knives. Have a read - it's worth it..

Learn more

Maxi's knife podcast: Passion for knives

Want to listen to two knife nerds talking their heads off??

Then you've come to the right place. Maxi and Christian's podcast is all about their passion for collecting, the big EDC world and the world's oldest tool, which is constantly reinventing itself..

If you're in the mood for funny reviews, exciting interviews and sometimes a little abstruse nonsense about pocket knives and EDC, then listen in.

Learn more

Exclusive Deals Straight to Your Phone

Get exclusive knife deals via WhatsApp!

Receive limited offers, secret discount codes, and insider news directly on your smartphone. Join our WhatsApp community now and save €5: As a thank you for signing up, we’ll give you €5 for your next order!


The perfect knife accessories

The right accessories make all the difference: discover high-quality clips, great handle scales and exclusive cases with which you can give your knife the finishing touch to suit your taste. You will also find care products for cleaning and polishing your knife in this category.

Blackout Edition Pocket Knife Poster
Blackout Edition Pocket Knife Poster – Guide to Knives 45 x 61 cm waterproof Ben Peterson knows a thing or two about knives. In fact, he knows quite a bit about pocket knives. After all, Ben has not only had a stellar YouTube career at Blade HQ, but was also previously employed at CRKT. So over the years, he's been able to amass an impressive wealth of knowledge. So what could be more obvious than to compress everything you know about such a topic onto a single poster. This is probably the idea behind the Knives, a modern guide poster.  However, you don't get an ordinary paper print here, but a water and cut resistant poster that reminds a bit of a desk pad. All KNAFS posters are shipped in rolled form so there are no creases.

€19.90*
Combat Beads Civilian Bead Acrylic
Color: Orange
Bead made of acrylic in 5 different colors Diameter: approx. 1,6 cm (0.625") Made in Canada

€37.00*
Combat Beads Line of Fire FOB
Version: 3
Line of Fire FOB by Combat Beads lanyard bead and bit holder innovative multifunctional design made from one piece finished by hand - every bead is a little bit unique blackened Ti, Blasted and Tumbled Ti, Aged Copper, Aged Brass   Forward Operating Base Combat Beads are something like the holy grail of lanyard beads in the EDC community. State-of-the-art CNC and turning technology meets excellent design, attention to detail, ingenuity and superior materials. The Line of Fire FOB beads are machined from one solid piece. At the bottom, there is a bit holder with powerful neodymium magnet for standard ¼" hex bits. The design allows for a sturdy grip and really makes this lanyard bead a handy tool in front line use. Even the name is a clever play on words: "line of fire" is the original name for the bead design. The suffix "FOB" means "Forward Operating Base" in military parlance. Of cause colloquially, "fob" also means something like "tag" or "keychain". Whether as a keychain, lanyard bead for knives or other pocket tools, the Line of Fire FOB offers a smart addition to your EDC! In Germany the Line of Fire FOB beads are exclusively distributed by Altonaer Silberwerkstatt. All Combat Beads are produced in Ontario (Canada) by Keith Griffin. These high end products combine numerous machine hours and a finish by hand with passion and attention to detail. This also makes each bead a little bit unique. Available in:Blackened TitaniumBlasted & Tumbled TitaniumAged CopperAged Brass It is worth noting that the copper and brass versions may age faster and acquire a patina over time.Each Line of Fire FOB comes with a standard Phillips head bit and key ring.    Technical Specifications: Length: 3,2 cm / 1.25 inch Diameter: 1,5 cm / 0,59 inch Material: Titanium, Brass, Copper  Finish: Blackened Ti, Blasted & Tumbled Ti, Aged Copper, Aged Brass

€70.00*
Combat Beads Dead Sergeant Bead
Material : Sterling Silver
Combat Beads Dead Sergeant Bead Metal casting Beads Made in Canada Dimension: 2.7 cm tall1.0625" tall

Variants from €105.00*
€179.00*
Daily Customs Basic Bead Cu
Material : Copper
Daily Customs Basic Bead Base for the configurable bead consists of two parts (1x "male" and 1x "female") available in titanium, brass and copper any number of Basic Bead Couplers can be inserted between the end pieces Dimensions: Diameter: 14.00 mm height: 12,20 mm Hole: 6,00 mm (suitable for two 550 paracord strands) Weight: Ti: 4.6 g Br: 8,8 g Cu: 9.2 g

€18.00*
Daily Customs Basic Bead Canvas Micarta green
Material : Micarta green
Daily Customs Basic Bead Canvas Micarta Base for configurable bead consists of two parts (1x "male" and 1x "female") Concept: any number of Basic Bead Couplers can be inserted between the end pieces Diameter: 14,00 mm Height: 12,20 mm Hole: 6,00 mm (suitable for two 550 paracord strands)

€30.00*
Daily Customs 3H Pocketclip Pinstripes Ti
Daily Customs Clip Pinstripes made of titanium incl. screws 3-hole clip suitable for: Daily Customs Scales 91.2, 91.3, 111s Benchmade Knives (3-hole clips) Emerson Knives (3-hole clips) Technical data:Material: TitaniumTotal length: 5,9 cmWidth: 1,45 cm (top) 0,62 cm (bottom)Thickness: 3 mmWeight: 3.5 gram

€50.00*
Daily Customs Basic Bead Coupler Cu
Material : Copper
Daily Customs Basic Bead Coupler fits perfectly between the two flanks of the Basic Bead does not work without the Basic Bead available in titanium, brass and copper Dimensions: Diameter: 14.00 mm height: 6,10 mm Hole: 6,00 mm (suitable for two 550 paracord strands) Weight: Ti: 2.8g Br: 5,4g Cu:5,6g

€12.00*
Daily Customs 3H Pocketclip Golfball Ti
Daily Customs Clip Golf Ball made of titanium incl. screws 3-hole clip suitable for: Daily Customs Scales 91.2, 91.3, 111s Benchmade Knives (3-hole clips) Emerson Knives (3-hole clips) Technical data:Material: TitaniumTotal length: 5,9 cmWidth: 1,45 cm (top) 0,62 cm (bottom)Thickness: 3 mmWeight: 3.5 gram

€50.00*
Daily Customs 3H Pocketclip Fluted Ti
Daily Customs Clip Fluted made of titanium incl. screws 3-hole clip suitable for: Daily Customs Scales 91.2, 91.3, 111s Benchmade Knives (3-hole clips) Emerson Knives (3-hole clips) Technical data:Material: TitaniumTotal length: 5,9 cmWidth: 1,45 cm (top) 0,62 cm (bottom)Thickness: 3 mmWeight: 3.5 gram

€50.00*