Limited to 100 pieces The “big brother” of the classic Biblio Micarta handle CPM S90V steel blade with PVD finish
Pocket knives are not just classic tools, but versatile helpers in everyday life and for outdoor activities. Thanks to their compact size, they fit perfectly in any pocket and are always ready to hand. If you want to buy a pocket knife, you will find a large selection of high-quality models here.
Limited to 100 pieces The “big brother” of the classic Biblio Micarta handle CPM S90V steel blade with PVD finish
Chaves Knives Redencion Street Integral Magnetic You hold the inlay up to the handle, and with a satisfying click the magnet pulls it into place. You don’t need a screwdriver for that. That’s the moment you understand why the Redencion Street Integral Magnetic gets so much attention in the scene. The knife is a folder from Chaves Knives, designed by US knifemaker Ramon Chavez. The Redencion is the model that has shaped the brand like no other, and the Street is its more compact version for everyday carry. In the Integral version, the handle is milled from a single block of titanium. Handle body and frame lock are one part – there are no screwed-on liners or spacers here. That makes the handle torsionally rigid and gives it continuous lines your eye just keeps coming back to. Pivot and clip screws are hidden, so the surface belongs to the titanium and the inlay. And you swap the magnetic inlay without any tools whenever your setup could use a different look. The blade is made from Böhler M390 and carries the compound grind that lets you spot a Chaves blade from a distance. M390 holds its edge for a long time and copes well with moisture – exactly what a knife needs when it works every day. At 8.3 cm long and around 4 mm thick, it’s strong enough for cardboard boxes and cable ties. You can get the Street as a drop point or a tanto, and the finishes range from satin and stonewash through grey and black PVD to bright DLC. It opens via the thumb studs, the blade runs on ball bearings and snaps solidly into the frame lock. Closed, the knife measures 10.8 cm, open 19.1 cm, and it weighs around 149 g. So it’s no lightweight… but hey, it’s a Chaves! If you like titanium folders, you’ll appreciate that, because this knife feels like something in your hand. The box includes the distinctive Chaves skull clip and a plain clip, depending on how much of a statement your pocket can handle.
Chaves Knives Redencion Street Integral Magnetic You hold the inlay up to the handle, and with a satisfying click the magnet pulls it into place. You don’t need a screwdriver for that. That’s the moment you understand why the Redencion Street Integral Magnetic gets so much attention in the scene. The knife is a folder from Chaves Knives, designed by US knifemaker Ramon Chavez. The Redencion is the model that has shaped the brand like no other, and the Street is its more compact version for everyday carry. In the Integral version, the handle is milled from a single block of titanium. Handle body and frame lock are one part – there are no screwed-on liners or spacers here. That makes the handle torsionally rigid and gives it continuous lines your eye just keeps coming back to. Pivot and clip screws are hidden, so the surface belongs to the titanium and the inlay. And you swap the magnetic inlay without any tools whenever your setup could use a different look. The blade is made from Böhler M390 and carries the compound grind that lets you spot a Chaves blade from a distance. M390 holds its edge for a long time and copes well with moisture – exactly what a knife needs when it works every day. At 8.3 cm long and around 4 mm thick, it’s strong enough for cardboard boxes and cable ties. You can get the Street as a drop point or a tanto, and the finishes range from satin and stonewash through grey and black PVD to bright DLC. It opens via the thumb studs, the blade runs on ball bearings and snaps solidly into the frame lock. Closed, the knife measures 10.8 cm, open 19.1 cm, and it weighs around 149 g. So it’s no lightweight… but hey, it’s a Chaves! If you like titanium folders, you’ll appreciate that, because this knife feels like something in your hand. The box includes the distinctive Chaves skull clip and a plain clip, depending on how much of a statement your pocket can handle.
Chaves Knives Redencion Street Integral Magnetic You hold the inlay up to the handle, and with a satisfying click the magnet pulls it into place. You don’t need a screwdriver for that. That’s the moment you understand why the Redencion Street Integral Magnetic gets so much attention in the scene. The knife is a folder from Chaves Knives, designed by US knifemaker Ramon Chavez. The Redencion is the model that has shaped the brand like no other, and the Street is its more compact version for everyday carry. In the Integral version, the handle is milled from a single block of titanium. Handle body and frame lock are one part – there are no screwed-on liners or spacers here. That makes the handle torsionally rigid and gives it continuous lines your eye just keeps coming back to. Pivot and clip screws are hidden, so the surface belongs to the titanium and the inlay. And you swap the magnetic inlay without any tools whenever your setup could use a different look. The blade is made from Böhler M390 and carries the compound grind that lets you spot a Chaves blade from a distance. M390 holds its edge for a long time and copes well with moisture – exactly what a knife needs when it works every day. At 8.3 cm long and around 4 mm thick, it’s strong enough for cardboard boxes and cable ties. You can get the Street as a drop point or a tanto, and the finishes range from satin and stonewash through grey and black PVD to bright DLC. It opens via the thumb studs, the blade runs on ball bearings and snaps solidly into the frame lock. Closed, the knife measures 10.8 cm, open 19.1 cm, and it weighs around 149 g. So it’s no lightweight… but hey, it’s a Chaves! If you like titanium folders, you’ll appreciate that, because this knife feels like something in your hand. The box includes the distinctive Chaves skull clip and a plain clip, depending on how much of a statement your pocket can handle.
Chaves Knives Redencion Street Integral Magnetic You hold the inlay up to the handle, and with a satisfying click the magnet pulls it into place. You don’t need a screwdriver for that. That’s the moment you understand why the Redencion Street Integral Magnetic gets so much attention in the scene. The knife is a folder from Chaves Knives, designed by US knifemaker Ramon Chavez. The Redencion is the model that has shaped the brand like no other, and the Street is its more compact version for everyday carry. In the Integral version, the handle is milled from a single block of titanium. Handle body and frame lock are one part – there are no screwed-on liners or spacers here. That makes the handle torsionally rigid and gives it continuous lines your eye just keeps coming back to. Pivot and clip screws are hidden, so the surface belongs to the titanium and the inlay. And you swap the magnetic inlay without any tools whenever your setup could use a different look. The blade is made from Böhler M390 and carries the compound grind that lets you spot a Chaves blade from a distance. M390 holds its edge for a long time and copes well with moisture – exactly what a knife needs when it works every day. At 8.3 cm long and around 4 mm thick, it’s strong enough for cardboard boxes and cable ties. You can get the Street as a drop point or a tanto, and the finishes range from satin and stonewash through grey and black PVD to bright DLC. It opens via the thumb studs, the blade runs on ball bearings and snaps solidly into the frame lock. Closed, the knife measures 10.8 cm, open 19.1 cm, and it weighs around 149 g. So it’s no lightweight… but hey, it’s a Chaves! If you like titanium folders, you’ll appreciate that, because this knife feels like something in your hand. The box includes the distinctive Chaves skull clip and a plain clip, depending on how much of a statement your pocket can handle.
Chaves Knives Redencion Street Integral Magnetic You hold the inlay up to the handle, and with a satisfying click the magnet pulls it into place. You don’t need a screwdriver for that. That’s the moment you understand why the Redencion Street Integral Magnetic gets so much attention in the scene. The knife is a folder from Chaves Knives, designed by US knifemaker Ramon Chavez. The Redencion is the model that has shaped the brand like no other, and the Street is its more compact version for everyday carry. In the Integral version, the handle is milled from a single block of titanium. Handle body and frame lock are one part – there are no screwed-on liners or spacers here. That makes the handle torsionally rigid and gives it continuous lines your eye just keeps coming back to. Pivot and clip screws are hidden, so the surface belongs to the titanium and the inlay. And you swap the magnetic inlay without any tools whenever your setup could use a different look. The blade is made from Böhler M390 and carries the compound grind that lets you spot a Chaves blade from a distance. M390 holds its edge for a long time and copes well with moisture – exactly what a knife needs when it works every day. At 8.3 cm long and around 4 mm thick, it’s strong enough for cardboard boxes and cable ties. You can get the Street as a drop point or a tanto, and the finishes range from satin and stonewash through grey and black PVD to bright DLC. It opens via the thumb studs, the blade runs on ball bearings and snaps solidly into the frame lock. Closed, the knife measures 10.8 cm, open 19.1 cm, and it weighs around 149 g. So it’s no lightweight… but hey, it’s a Chaves! If you like titanium folders, you’ll appreciate that, because this knife feels like something in your hand. The box includes the distinctive Chaves skull clip and a plain clip, depending on how much of a statement your pocket can handle.
Interchangeable G10 scales Magnacut ClipPoint blade Made in the USA
Sebenza 31 CGG – Computer Generated Graphic: Forever Flag CPM MagnaCut blade, stonewashed, 63–64 RC 6AL4V titanium handles, glass blasted Reeve Integral Lock with Ceramic Ball Interface Made in Boise, Idaho, USA When Chris and Anne Reeve became naturalized American citizens in 2002, the American flag became their Forever Flag. It has held a place on their knives ever since — one of the most personal graphics Chris Reeve Knives has ever put on a blade. The Sebenza 31 CGG Forever Flag depicts the flag in motion: not static, not decorative, but flying — the way it has stood above people in moments that mattered. For the Reeves, it is not a political statement, but a personal one: a commitment to the country they chose as their home. The knife itself needs no introduction. The Sebenza has been the benchmark for production folders for decades. The CPM MagnaCut blade — one of the most capable production knife steels available today — is stonewashed and hardened to 63–64 RC. The 6AL4V titanium handles are glass blasted and will feel the same after twenty years of daily carry as they do on day one. The Reeve Integral Lock with Ceramic Ball Interface remains one of the most reliable locking mechanisms ever built into a production folder. The CGG finish is worked directly into the titanium scale — no sticker, no inlay print, but a process that becomes part of the knife's own surface. The result is a graphic that ages with the knife without fading. Dimensions & Weight Overall length Large: 8.40" (213.4 mm) / Small: 6.98" (177.3 mm) Weight Large: 4.7 oz (133 g) / Small: 3.0 oz (85 g) Lifetime Warranty: Chris Reeve Knives stands behind every knife for its entire service life — including a free Clean, Tune, Sharpen, and re-sandblast for unmodified knives.
Average rating of 5 out of 5 stars
Chris Reeve Knives Sebenza 31 Available in Large or SmallReeve Integral Lock with ceramic ball on the lockbarBlade steel: MagnaCutClip design: offset (on the 31, the clip now sits diagonally rather than straight) Open the blade and you notice it straight away: everything here just fits! You won’t find any bearings, yet it runs as if it’s been oiled, because the tolerances really are spot on, down to the last detail. Pick up a Sebenza for the first time and you’re guaranteed to open and close it a few more times afterwards. Just because. The Sebenza is the folder from Chris Reeve Knives in Boise, Idaho, and for many in the scene it’s the grail knife, full stop. The name comes from Zulu and means work, a nod to Chris Reeve’s South African roots. The first Sebenza was made in 1987, and since 2019 the Sebenza 31 has been the current generation and successor to the legendary Sebenza 21. The basic shape has stayed the same. The improvements are in places you’ll only notice on second glance. First and foremost, the Reeve Integral Lock, Chris Reeve’s take on the frame lock. On the 31, a ceramic ball sits in the lockbar and presses against the blade tang. Ceramic is so hard that practically nothing wears at this contact point over the years. That’s why the lock-up should feel the same after long use as it did on day one. You may already know the principle from the Umnumzaan and the Inkosi. On the 31, the clip is offset and sits at a slight angle, so it no longer presses on the lockbar. On top of that, the finger groove at the front of the handle has been reground, and you feel that straight away in the grip. The handle is made from sandblasted titanium, the hollow-ground blade from CPM MagnaCut. The steel is extremely corrosion resistant and holds its edge for a long time. For you, that means less sharpening and fewer worries when Hamburg serves up its usual drizzle. Small or Large? The Large has a 9.2 cm blade that’s 3.2 mm thick. Open, it measures 21.2 cm and tips the scales at 133 g. A full-grown work knife that still won’t hang in your pocket like a brick. The Small comes in at 7.5 cm of blade with 3.0 mm stock, measures 17.5 cm open and weighs 85 g. In the EDC world, it’s been a benchmark for years, and for good reason. Depending on availability, you can choose between a drop point and a tanto blade. Then there’s the Insingo with its long, almost straight edge, which pays off if you do a lot of draw cuts. In the end, the Sebenza 31 is a knife you don’t have to think about for long. You slip it into your pocket in the morning, it does its job, and in the evening it lies on the table just as precise as on day one. That’s really all you want from a folder.
The Fux is loose Somewhere in Potsdam, a knife designer is probably smiling to himself right now. The Reate VK-FUX is the latest folder in the VK series that Reate builds together with Vulpex Knives, and you can tell that someone spent a very long time thinking about lines. That someone is Steven Kempa, the mind behind Vulpex Knives. He started designing knives on the side, as a hobby alongside his job as a police officer, until it grew into a brand of its own. His designs are created entirely digitally in Fusion 360, and Steven likes to draw his ideas from the animal kingdom. Together with Poikilo he built the VK-Zen, which won Best Folder and Best in Show at Blade Show Texas. We’ve known Steven for years and count him among the most exciting designers in the scene. And since Vulpex goes back to the Latin vulpes, meaning fox, it’s easy to see why the name FUX makes you grin for a second. Kempa is in good hands at Reate. The VK series already includes the VK-Tron, inspired by the light cycles from TRON, along with the VK-ANUB, VK-FROK and VK-CLU. The VK-FUX joins the line-up and brings Kempa’s signature style to a format made for everyday EDC use. The blade is Böhler Elmax, hardened to 60 HRC. The powder metallurgy steel resists rust, holds its edge for a long time and still sharpens up without any drama. The drop point shape with its easily controlled tip plays to its strengths with whatever the day throws at you, from parcel tape to cord. 8.4 cm of blade at 3.4 mm thick, 19.8 cm open, 11.4 cm closed, and the whole thing weighs 105 g. The handle is titanium, and a liner lock keeps the blade open. Depending on the version, the VK-FUX comes with a darkwash finish, in frosted satin or all in black, some with a coloured anodised titanium clip. That makes it appealing to two camps: EDC folks who want a titanium folder for every day, and collectors who already keep a gap on the shelf for Kempa designs.
The Fux is loose Somewhere in Potsdam, a knife designer is probably smiling to himself right now. The Reate VK-FUX is the latest folder in the VK series that Reate builds together with Vulpex Knives, and you can tell that someone spent a very long time thinking about lines. That someone is Steven Kempa, the mind behind Vulpex Knives. He started designing knives on the side, as a hobby alongside his job as a police officer, until it grew into a brand of its own. His designs are created entirely digitally in Fusion 360, and Steven likes to draw his ideas from the animal kingdom. Together with Poikilo he built the VK-Zen, which won Best Folder and Best in Show at Blade Show Texas. We’ve known Steven for years and count him among the most exciting designers in the scene. And since Vulpex goes back to the Latin vulpes, meaning fox, it’s easy to see why the name FUX makes you grin for a second. Kempa is in good hands at Reate. The VK series already includes the VK-Tron, inspired by the light cycles from TRON, along with the VK-ANUB, VK-FROK and VK-CLU. The VK-FUX joins the line-up and brings Kempa’s signature style to a format made for everyday EDC use. The blade is Böhler Elmax, hardened to 60 HRC. The powder metallurgy steel resists rust, holds its edge for a long time and still sharpens up without any drama. The drop point shape with its easily controlled tip plays to its strengths with whatever the day throws at you, from parcel tape to cord. 8.4 cm of blade at 3.4 mm thick, 19.8 cm open, 11.4 cm closed, and the whole thing weighs 105 g. The handle is titanium, and a liner lock keeps the blade open. Depending on the version, the VK-FUX comes with a darkwash finish, in frosted satin or all in black, some with a coloured anodised titanium clip. That makes it appealing to two camps: EDC folks who want a titanium folder for every day, and collectors who already keep a gap on the shelf for Kempa designs.
The Fux is loose Somewhere in Potsdam, a knife designer is probably smiling to himself right now. The Reate VK-FUX is the latest folder in the VK series that Reate builds together with Vulpex Knives, and you can tell that someone spent a very long time thinking about lines. That someone is Steven Kempa, the mind behind Vulpex Knives. He started designing knives on the side, as a hobby alongside his job as a police officer, until it grew into a brand of its own. His designs are created entirely digitally in Fusion 360, and Steven likes to draw his ideas from the animal kingdom. Together with Poikilo he built the VK-Zen, which won Best Folder and Best in Show at Blade Show Texas. We’ve known Steven for years and count him among the most exciting designers in the scene. And since Vulpex goes back to the Latin vulpes, meaning fox, it’s easy to see why the name FUX makes you grin for a second. Kempa is in good hands at Reate. The VK series already includes the VK-Tron, inspired by the light cycles from TRON, along with the VK-ANUB, VK-FROK and VK-CLU. The VK-FUX joins the line-up and brings Kempa’s signature style to a format made for everyday EDC use. The blade is Böhler Elmax, hardened to 60 HRC. The powder metallurgy steel resists rust, holds its edge for a long time and still sharpens up without any drama. The drop point shape with its easily controlled tip plays to its strengths with whatever the day throws at you, from parcel tape to cord. 8.4 cm of blade at 3.4 mm thick, 19.8 cm open, 11.4 cm closed, and the whole thing weighs 105 g. The handle is titanium, and a liner lock keeps the blade open. Depending on the version, the VK-FUX comes with a darkwash finish, in frosted satin or all in black, some with a coloured anodised titanium clip. That makes it appealing to two camps: EDC folks who want a titanium folder for every day, and collectors who already keep a gap on the shelf for Kempa designs.
The Fux is loose Somewhere in Potsdam, a knife designer is probably smiling to himself right now. The Reate VK-FUX is the latest folder in the VK series that Reate builds together with Vulpex Knives, and you can tell that someone spent a very long time thinking about lines. That someone is Steven Kempa, the mind behind Vulpex Knives. He started designing knives on the side, as a hobby alongside his job as a police officer, until it grew into a brand of its own. His designs are created entirely digitally in Fusion 360, and Steven likes to draw his ideas from the animal kingdom. Together with Poikilo he built the VK-Zen, which won Best Folder and Best in Show at Blade Show Texas. We’ve known Steven for years and count him among the most exciting designers in the scene. And since Vulpex goes back to the Latin vulpes, meaning fox, it’s easy to see why the name FUX makes you grin for a second. Kempa is in good hands at Reate. The VK series already includes the VK-Tron, inspired by the light cycles from TRON, along with the VK-ANUB, VK-FROK and VK-CLU. The VK-FUX joins the line-up and brings Kempa’s signature style to a format made for everyday EDC use. The blade is Böhler Elmax, hardened to 60 HRC. The powder metallurgy steel resists rust, holds its edge for a long time and still sharpens up without any drama. The drop point shape with its easily controlled tip plays to its strengths with whatever the day throws at you, from parcel tape to cord. 8.4 cm of blade at 3.4 mm thick, 19.8 cm open, 11.4 cm closed, and the whole thing weighs 105 g. The handle is titanium, and a liner lock keeps the blade open. Depending on the version, the VK-FUX comes with a darkwash finish, in frosted satin or all in black, some with a coloured anodised titanium clip. That makes it appealing to two camps: EDC folks who want a titanium folder for every day, and collectors who already keep a gap on the shelf for Kempa designs.
- Understated pocket knife in neo-Japanese style- Designed by Guy Poggetti- Micarta handle- Tanto blade in 14C28N steel with stonewash finish- Supplied in a high-quality nylon pouch Neo-Japan The Mini Sanjo is the more compact version of the Böker Plus Sanjo. It was designed by French knife designer Guy Poggetti, who brings Japanese design language together with modern folder technology. The style is called neo-Japan: clean, almost graphic lines without any frills. The name refers to the city of Sanjo in Niigata Prefecture, known for its long tradition of craftsmanship. From there to the Elbe it’s almost nine thousand kilometres, but the Mini Sanjo works just as well here as it does there. The blade is made from 14C28N, a stainless steel that holds its edge well and is easy to resharpen. Its shape borrows a fair bit from the tanto, and the stonewash finish gives it a deliberately worn look. A handy side effect: everyday scratches barely show. At 7.8 cm long and 3.2 mm thick, the blade has plenty of substance for a compact knife. It opens via a front flipper on the back of the handle, the ball bearings make sure the blade snaps open briskly, and a liner lock holds everything in place. The handle scales are Micarta, which stays grippy even when your fingers get a bit damp and develops a patina over time. With an overall length of 17.5 cm and a weight of 96 g, the Mini Sanjo sits comfortably light in your pocket, and the tip-up clip is mounted on the right. French designer, Japanese name: quite a world tour for just under eight centimetres of blade. Works brilliantly all the same.
Harpoon blade, 8.4 cm, 14C28N steel – hollow ground Liner lock on ceramic ball bearings Four variants – G10, Micarta and Damascus A pirate with a harpoon – in Hamburg, that feels right at home. Sam Tran has been part of the knife scene for years as Raven The Pirate, and the Ryson was his first original design. His brief was clear: thumb stud opener, no flipper. WE Knife brought it to life as a titanium frame lock. Now CIVIVI, WE's sister brand, introduces the Ryson-E – bringing the design to a price point that works for a lot more knife enthusiasts. The Ryson-E is a liner lock folder with a thumb stud. The harpoon blade measures 8.4 cm, is 3 mm thick and hollow ground. The distinctive groove along the spine gives the tip its character while keeping it fine enough for detail work. For steel, CIVIVI chose Sandvik's 14C28N – a fine-grained, stainless steel that's easy to maintain and straightforward to resharpen. For everyday tasks between cutting packing tape and slicing lunch, this is exactly the right league. Compared to its big brother, the Ryson-E swaps the titanium frame lock for a stainless steel liner lock. The blade runs on ceramic ball bearings and opens with a satisfying smoothness. Closed length is 11 cm, weight comes in at around 87 g. The tip-up clip is reversible for left-hand carry. Handle scales come in four options. Tan G10 pairs with a grey stonewashed blade, Burgundy G10 with a black stonewashed finish. For a more classic look, green canvas Micarta comes with a satin blade. And for the collectors among you: black Micarta with a Damascus blade.
Harpoon blade, 8.4 cm, 14C28N steel – hollow ground Liner lock on ceramic ball bearings Four variants – G10, Micarta and Damascus A pirate with a harpoon – in Hamburg, that feels right at home. Sam Tran has been part of the knife scene for years as Raven The Pirate, and the Ryson was his first original design. His brief was clear: thumb stud opener, no flipper. WE Knife brought it to life as a titanium frame lock. Now CIVIVI, WE's sister brand, introduces the Ryson-E – bringing the design to a price point that works for a lot more knife enthusiasts. The Ryson-E is a liner lock folder with a thumb stud. The harpoon blade measures 8.4 cm, is 3 mm thick and hollow ground. The distinctive groove along the spine gives the tip its character while keeping it fine enough for detail work. For steel, CIVIVI chose Sandvik's 14C28N – a fine-grained, stainless steel that's easy to maintain and straightforward to resharpen. For everyday tasks between cutting packing tape and slicing lunch, this is exactly the right league. Compared to its big brother, the Ryson-E swaps the titanium frame lock for a stainless steel liner lock. The blade runs on ceramic ball bearings and opens with a satisfying smoothness. Closed length is 11 cm, weight comes in at around 87 g. The tip-up clip is reversible for left-hand carry. Handle scales come in four options. Tan G10 pairs with a grey stonewashed blade, Burgundy G10 with a black stonewashed finish. For a more classic look, green canvas Micarta comes with a satin blade. And for the collectors among you: black Micarta with a Damascus blade.
Harpoon blade, 8.4 cm, 14C28N steel – hollow ground Liner lock on ceramic ball bearings Four variants – G10, Micarta and Damascus A pirate with a harpoon – in Hamburg, that feels right at home. Sam Tran has been part of the knife scene for years as Raven The Pirate, and the Ryson was his first original design. His brief was clear: thumb stud opener, no flipper. WE Knife brought it to life as a titanium frame lock. Now CIVIVI, WE's sister brand, introduces the Ryson-E – bringing the design to a price point that works for a lot more knife enthusiasts. The Ryson-E is a liner lock folder with a thumb stud. The harpoon blade measures 8.4 cm, is 3 mm thick and hollow ground. The distinctive groove along the spine gives the tip its character while keeping it fine enough for detail work. For steel, CIVIVI chose Sandvik's 14C28N – a fine-grained, stainless steel that's easy to maintain and straightforward to resharpen. For everyday tasks between cutting packing tape and slicing lunch, this is exactly the right league. Compared to its big brother, the Ryson-E swaps the titanium frame lock for a stainless steel liner lock. The blade runs on ceramic ball bearings and opens with a satisfying smoothness. Closed length is 11 cm, weight comes in at around 87 g. The tip-up clip is reversible for left-hand carry. Handle scales come in four options. Tan G10 pairs with a grey stonewashed blade, Burgundy G10 with a black stonewashed finish. For a more classic look, green canvas Micarta comes with a satin blade. And for the collectors among you: black Micarta with a Damascus blade.
Harpoon blade, 8.4 cm, 14C28N steel – hollow ground Liner lock on ceramic ball bearings Four variants – G10, Micarta and Damascus A pirate with a harpoon – in Hamburg, that feels right at home. Sam Tran has been part of the knife scene for years as Raven The Pirate, and the Ryson was his first original design. His brief was clear: thumb stud opener, no flipper. WE Knife brought it to life as a titanium frame lock. Now CIVIVI, WE's sister brand, introduces the Ryson-E – bringing the design to a price point that works for a lot more knife enthusiasts. The Ryson-E is a liner lock folder with a thumb stud. The harpoon blade measures 8.4 cm, is 3 mm thick and hollow ground. The distinctive groove along the spine gives the tip its character while keeping it fine enough for detail work. For steel, CIVIVI chose Sandvik's 14C28N – a fine-grained, stainless steel that's easy to maintain and straightforward to resharpen. For everyday tasks between cutting packing tape and slicing lunch, this is exactly the right league. Compared to its big brother, the Ryson-E swaps the titanium frame lock for a stainless steel liner lock. The blade runs on ceramic ball bearings and opens with a satisfying smoothness. Closed length is 11 cm, weight comes in at around 87 g. The tip-up clip is reversible for left-hand carry. Handle scales come in four options. Tan G10 pairs with a grey stonewashed blade, Burgundy G10 with a black stonewashed finish. For a more classic look, green canvas Micarta comes with a satin blade. And for the collectors among you: black Micarta with a Damascus blade.
Magnacut Blade with black DLC coating Lightweight only 63 grams black G10 handle scales UKPK goes Salt It's no big secret that the laws regarding knives and carrying them in public are much stricter in Europe than in the USA. However, Spyderco was one of the first major manufacturers to take on this problem and create a kind of European classic in its own range with the UKPK (UK Penknife), which even meets the very strict laws in the UK. Here two important factors come together: although you can open the UKPK - thanks to the Spyderholes - one-handed, but the blade is not locked in the open state, but is held by a powerful back spring (similar to a Swiss Army knife). This allows you to carry the UKPK perfectly legally. Yet despite its small size, lack of a lock, and extremely lightweight construction, the UKPK is a highly functional pocket knife. The thin blade proves to be a real cutting devil in everyday EDC use thanks to the raised flat grind and shows that Spyderco really had a cutting tool in mind here and not a folding crowbar. The Magnacut used in this version is extremely corrosion resistant and can therefore be used even under the most unfavorable conditions. The black G10 handle scales, which you might no from other salt series knives, do not require steel plates underneath and ensure a construction that is as light as it is strong. At just 63 grams, the UKPK is hardly bulky in your pocket. The deep-carry pocket clip can be mounted on the left or right side, which makes the knife interesting for left-handers as well. All in all, you get with the UKPK a really highly suitable EDC pocket knife which not only complies with local legislation, but also proves to be a loyal companion.
Full-size EDC knifeSturdy Ball Bearing Lock Black G10 handle scales and a MagnaMax blade. Eric's first design – now with a MagnaMax steel upgrade Spyderco has been a family-run business from the very beginning. In the early days, the company practically consisted of Sal Glesser and his wife, traveling across the country in a bus and attending trade shows. Today, Spyderco is based in Golden, Colorado, and has become one of the leading pocket knife manufacturers in the USA. Alongside Sal Glesser, his son Eric has taken on a major role in leading the company. And his very first design, the Manix 2, was an instant hit. The Manix 2 is definitely one of those Spyderco knives that you pick up and simply don't want to put back down. Its ergonomic design offers an incredibly comfortable grip, making the knife feel almost glued to your hand while working. The handle scales are made from virtually indestructible G10 and sit on two solid steel liners, giving the knife plenty of strength and durability. One of the key features of the Manix 2 is the Ball Bearing Lock. A centrally positioned spring pushes a thick steel ball, housed in a polymer cage, against the blade tang, preventing the blade from accidentally folding back in. This lock is not only incredibly strong, but also provides a completely unique operating feel. The blade action has a smooth, controlled resistance, resulting in an exceptionally precise and controlled deployment. The leaf-shaped blade of the Manix 2, originally made from CPM S30V, has now been upgraded to MagnaMax steel. As you would expect from Spyderco, the blade is opened using the large trademark thumb hole. Thanks to the blade tip being positioned directly along the knife's centerline, the Manix 2 offers maximum control during use, allowing for highly precise cutting tasks. The full flat grind provides excellent cutting performance, making this folder a genuine pleasure to work with.
Duty Tactical Knife DIY Knife Kit behind 24 doors Detailed step-by-step instructions & a supplementary YouTube video tutorial that clearly guides you through the assembly process
Böker Plus Gent DIY Knife Kit behind 24 doors Detailed step-by-step instructions & a supplementary YouTube video tutorial that clearly guides you through the assembly process
Deadman Design Elixir The man behind Deadman Design is Matt. He’s a firefighter by trade and grew up in Texas, working in his family’s construction business. There was always a pocket knife in his jeans, and Matt openly admits he’s used his knives as a pry bar or a hammer more than once. You shouldn’t try that at home, but that exact experience went into the Elixir. To build his ideal knife, he taught himself CAD and kept pulling prototypes off his 3D printer until the shape was right. Next came production prototypes with Reate. After one long year and a successful Kickstarter campaign, the Elixir was finished, the brand’s first production knife. Deadman Design is still a garage project in the best sense: Matt and his wife Madi work out of a small room above the garage. The compound ground blade has a flat grind up front that handles the rougher jobs. Towards the back, a hollow grind gives you fine, controlled cuts. The forward finger notch brings your index finger closer to the edge when things need to be precise. The steel is Vanax. It relies on nitrogen instead of carbon, which makes it practically rustproof. Salty harbour air, rain or a sweaty summer day in your pocket won’t bother it. Handle and hardware are all titanium, and the milled clip has a hidden screw. The Elixir is made by Reate, and you can see it in the fit and finish straight away. Choose from the following finishes: Sandblasted Stonewashed Blackwash DLC
Deadman Design Elixir The man behind Deadman Design is Matt. He’s a firefighter by trade and grew up in Texas, working in his family’s construction business. There was always a pocket knife in his jeans, and Matt openly admits he’s used his knives as a pry bar or a hammer more than once. You shouldn’t try that at home, but that exact experience went into the Elixir. To build his ideal knife, he taught himself CAD and kept pulling prototypes off his 3D printer until the shape was right. Next came production prototypes with Reate. After one long year and a successful Kickstarter campaign, the Elixir was finished, the brand’s first production knife. Deadman Design is still a garage project in the best sense: Matt and his wife Madi work out of a small room above the garage. The compound ground blade has a flat grind up front that handles the rougher jobs. Towards the back, a hollow grind gives you fine, controlled cuts. The forward finger notch brings your index finger closer to the edge when things need to be precise. The steel is Vanax. It relies on nitrogen instead of carbon, which makes it practically rustproof. Salty harbour air, rain or a sweaty summer day in your pocket won’t bother it. Handle and hardware are all titanium, and the milled clip has a hidden screw. The Elixir is made by Reate, and you can see it in the fit and finish straight away. Choose from the following finishes: Sandblasted Stonewashed Blackwash DLC
Whether as a daily tool or a stylish collector's item, pocket knives have fascinated people since the dawn of time. Knives are among the world's earliest tools, combining craftsmanship with practical application. These knives are not only works of art but also coveted collectibles and sometimes even investments. The oldest known pocket knife is over 2,500 years old, showing how long this practical tool has been part of our culture.
Pocket knives are characterized primarily by their folding mechanism, which allows the blade to be safely stored within the handle. This makes them particularly compact and safe. Today, there is a wide variety of pocket knives from various manufacturers and designers around the world. They come in different colors, blade shapes and lengths, as well as with various locking and opening mechanisms. Every pocket knife tells its own story and serves as a reliable companion in its owner's daily life.
Choosing the right pocket knife always depends on various factors that should be tailored to your personal needs and preferences.
The blade material is crucial for the knife's sharpness, durability, and maintenance. You can choose between stainless steel, non-stainless carbon or high-carbon steel, or even Damascus steel.
Our tip: For tougher tasks and demanding jobs, fixed-blade knives are ideal. They offer stability and reliability, especially for outdoor activities or craftwork. If you're looking for a compact and versatile knife for daily use, EDC knives are a great choice. They complete your EDC kit and are also true eye-catchers.
If you want to gift a pocket knife, you should also ask yourself beforehand what the recipient intends to use the pocket knife for. Is it for everyday use or more of a collector's item? A carving knife for children, or perhaps for camping? This consideration largely determines what features the knife should have.
According to Weapons Act (WaffG) § 42a, there is a prohibition on carrying certain items. These include, among other things, knives with lockable blades that can be operated with one hand and fixed-blade knives with a blade length over 12 cm. All information on the topic "What does §42a-compliant mean" can be found on our website.