Viper Katla Canvas Micarta Green
Solid EDC knife with pocket clip
Jesper-Voxnaes-Design
micarta handle and M390 blade
Hot like a volcano
The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point.
The handle is equipped with micarta scales, finished with a matte stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs.
The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.
Viper Katla Canvas Micarta Black
Solid EDC knife with pocket clip
Jesper-Voxnaes-Design
micarta handle and M390 blade
Hot like a volcano
The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point.
The handle is equipped with micarta scales, finished with a matte stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs.
The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.
Viper Orso 2 Titanium
Jens Anso Design
Blade steel made of: LO-QPM20-4 (as M390 alternative) with a satin blade finish
Titanium Framelock
"Easy Peasy" Flipper Mechanism
Clip, backspacer and ring made of blue anodized titanium
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand. The show side of this version is made of carbon fiber.
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
Viper Katla Stonewashed Titanium 3D
Solid EDC knife with pocket clip
Jesper-Voxnaes-Design
titanium handle and M390 blade
with 3D CNC details
Hot like a volcano
The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point.
The handle is equipped with titanium scales, finished with a stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs.
The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.
Viper Orso2 Dark Stonewashed Titan 3D
Jens Anso Design
LO-QPM20-4 blade
Dark Stonewashed blade finish
3D Dark Stonewashed Titanium Handle
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand.
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
Viper Orso2 Green Micarta
Jens Anso Design
LO-QPM20-4 blade
Stonewashed blade finish
Micarta handle
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand. The show side of this version is made of green micarta
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
Viper Orso2 Titan 3D
Jens Anso Design
LO-QPM20-4 blade
Satin blade finish
Sandblasted Titan handle
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand.
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
