EDC Knives at the Knife Lounge

Snecx Tan Design Handle made of G10 or Micarta Sheepsfoot blade made of Nitro-V steel with satin finish

Outdoor knife CPM3V steel blade Droppoint blade handle made of TPE (low heat conductivity) including high quality Kydex Bronco The new Böker Bronco is THE price/performance hit when it comes to a super sturdy, rather compact outdoor knife. This knife is made of the ultra-tough but very cutting CPM 3V steel, which is one of the most popular alloys when the blade must withstand even the roughest loads.Nevertheless, the blade has been ground to such a thinness that, in addition to stability, it also offers excellent cutting properties. An extremely sharp 90-degree angle has been ground into the front part of the blade spine, allowing you to easily scratch a fire steel. For the handle, Böker have opted for an injected TPE handle, which is simply fabulous in the hand and thanks to its texture is still safe to grip even with wet hands. Thanks to the comparatively low weight, the Böker Bronco is an all-around perfect companion in the forest or on a hike. Included is a kydex sheath, including a clip. The knife is of course manufactured entirely in Böker's factory in Solingen.

Outdoor knife CPM3V steel blade Droppoint blade handle made of TPE (low heat conductivity) including high quality Kydex Bronco The new Böker Bronco is THE price/performance hit when it comes to a super sturdy, rather compact outdoor knife. This knife is made of the ultra-tough but very cutting CPM 3V steel, which is one of the most popular alloys when the blade must withstand even the roughest loads.Nevertheless, the blade has been ground to such a thinness that, in addition to stability, it also offers excellent cutting properties. An extremely sharp 90-degree angle has been ground into the front part of the blade spine, allowing you to easily scratch a fire steel. For the handle, Böker have opted for an injected TPE handle, which is simply fabulous in the hand and thanks to its texture is still safe to grip even with wet hands. Thanks to the comparatively low weight, the Böker Bronco is an all-around perfect companion in the forest or on a hike. Included is a kydex sheath, including a clip. The knife is of course manufactured entirely in Böker's factory in Solingen.

Chuck Gedraitis Design Handle made of semi-transparent Ultem DropPoint blade made of Magnacut Includes felt case Handcrafted in Solingen

Kyle Lamb Design G10 handle Drop point blade made of Nitro-V steel with stonewashed finish Includes Kydex sheath & 2 black straps

Notorious EDC Kingpin - classic meets modernThe Kingpin from Notorious EDC is a slipjoint that could hardly be more modern - and yet is deeply rooted in classic knife traditions. The idea that Stan Lee's Marvel character “Kingpin” could carry this very knife in the inside pocket of his jacket gives the design an iconic touch - and makes this knife far more than just a practical tool.  Tom Medvedich's idea of a modern gentleman's folder is evident in every detail: the slim handle sits comfortably and securely in the hand thanks to a discreetly indicated recessed grip. A milled groove on the titanium handle provides visual depth and is reminiscent of a classic bolster. The blade stands out in particular: hollow-ground from Magnacut steel, with a long fuller and a striking Harpoon tip - a design that makes knife-loving hearts beat faster. The version offered here features a jigged pattern on the titanium handle scales - a deliberate reminiscence of the classic slipjoints of the 19th century, whose handle scales were traditionally often made of textured bone. This textured pattern not only gives the knife additional grip, but also an aesthetic depth that perfectly combines old craftsmanship and modern manufacturing. The Kingpin thus symbolizes a renaissance of the slipjoint knife: classic mechanics meet high-tech materials such as titanium and powder metallurgical steel. The combination of functionality, design and historical echoes makes it an exceptional EDC. The Kingpin is manufactured by Reate - which stands for absolute top quality. Thanks to the slipjoint design, it is also legal to carry in many European countries. This makes it the ideal companion for all those who not only want to carry function and character in their pocket carry, but also that certain something. The Kingpin is supplied with high-quality leather briefs and a cleaning cloth. Available in two versions: Black PVD and Titan Beadblast - each with a jigged pattern on the handle scales. Ships with a premium leather slip and cleaning cloth.

Notorious EDC Kingpin - classic meets modernThe Kingpin from Notorious EDC is a slipjoint that could hardly be more modern - and yet is deeply rooted in classic knife traditions. The idea that Stan Lee's Marvel character “Kingpin” could carry this very knife in the inside pocket of his jacket gives the design an iconic touch - and makes this knife far more than just a practical tool.  Tom Medvedich's idea of a modern gentleman's folder is evident in every detail: the slim handle sits comfortably and securely in the hand thanks to a discreetly indicated recessed grip. A milled groove on the titanium handle provides visual depth and is reminiscent of a classic bolster. The blade stands out in particular: hollow-ground from Magnacut steel, with a long fuller and a striking Harpoon tip - a design that makes knife-loving hearts beat faster. The version offered here features a jigged pattern on the titanium handle scales - a deliberate reminiscence of the classic slipjoints of the 19th century, whose handle scales were traditionally often made of textured bone. This textured pattern not only gives the knife additional grip, but also an aesthetic depth that perfectly combines old craftsmanship and modern manufacturing. The Kingpin thus symbolizes a renaissance of the slipjoint knife: classic mechanics meet high-tech materials such as titanium and powder metallurgical steel. The combination of functionality, design and historical echoes makes it an exceptional EDC. The Kingpin is manufactured by Reate - which stands for absolute top quality. Thanks to the slipjoint design, it is also legal to carry in many European countries. This makes it the ideal companion for all those who not only want to carry function and character in their pocket carry, but also that certain something. The Kingpin is supplied with high-quality leather briefs and a cleaning cloth. Available in two versions: Black PVD and Titan Beadblast - each with a jigged pattern on the handle scales. Ships with a premium leather slip and cleaning cloth.

Böker BFF Packlite Lucas Burnley design  Steel handle with weight-reducing recesses DropPoint blade made from MagnaCut with stonewash finish Includes Kydex sheath and ball chain

Limited to 300 pieces (individually numbered) Lucas Burnley design with "Raven" logo on the handle Blade made from CPM-S35VN with black PVD finish Raven's first knife – now his version. The Kihon was one of the first knives Raven the Pirate ever bought. It was with this model that his journey into EDC photography began – the knife that appeared in countless photos long before anyone knew his name. Now, he’s created his own version – a strictly limited special edition with a personal touch. Only 300 pieces worldwide – brought to life with Lucas Burnley & Böker Plus.

Jens Anso / Jesper Voxnaes Design brass handle S90V blade with stonewashed finish

Jens Anso / Jesper Voxnaes Design titanium handle S90V blade with satin finish

Winner of the “Imported Folding Knife of the Year” award at the 2025 Blade Show AtlantaJoseph Vero Design Handle made of G10 Drop point blade made of S45VN steel with blackwash finish

Lefthand version available in Large or Small Wood inlay on the front and backGlasblasted Titanium It was a sunny day in Idaho when Chris Reeve Knives decided to discontinue the Sebenza 21, one of their most popular and beloved pocket knives. The knife community was shocked and disappointed. But the visionaries at Chris Reeve Knives (CRK) had already been working on a worthy successor: the Sebenza 31.The new model wasn't just an update of the old Sebenza. It was an embodiment of CRK's values and beliefs that had been honed over the years. The new inlays on the front were proof of that. The wooden back inlay was reminiscent of the Inkosi model, while the large inlay on the show side described a wide arc over the handle of the knife. It was a work of art that ergonomically hugged the hand and made the heart race.  But that wasn't all. The revised closure with the ceramic ball was a new technology. The hardness of that ball was in an almost unmeasurable range, preventing long-term wear and tear. And the absence of the hole on the presentation side of the knife and the adjusted pocket clip were further proof that CRK had perfected the Sebenza 31 down to the smallest detail. But the most important thing was that the Sebenza 31 continued to embody CRK's values and beliefs. It was a knife built for eternity, a knife that would serve you faithfully and master the adventures and challenges of life with you. Whether large or small, the Sebenza was and is a faithful companion that never disappoints. And so the Sebenza 31 will continue to dominate the knife community and capture the hearts of its owners. Because at CRK, it's not just about knives. It's about art, technology, and the beauty of craftsmanship.

A little different – and all the better for it. What do Danish designers Jesper Voxnaes and Jens Ansø do when they’re looking for inspiration for a new knife? We can’t say for sure – but judging by the name of their latest design, the Sonoma V2, it’s safe to assume that a certain scenic stretch of Northern California played a part. Sonoma County – a land of rugged coastlines, rolling hills, and endless vineyards. The kind of place where you can clear your head, breathe deep, and maybe start sketching the perfect EDC knife.  With the ACE Sonoma V2, Voxnaes and Ansø have taken one of their most beloved designs and refined it – a few smart tweaks here, a bit more everyday usability there. The result? A knife that keeps the soul of the original but feels lighter, sleeker, and just a bit more… clever.  Manufactured by none other than Reate, one of the most precise knife makers on the planet, the Sonoma V2 is crafted with the kind of quality that makes knife enthusiasts nod knowingly. Reate doesn’t just make knives – they make future legends. This version features PVD-coated titanium handle scales, giving it a sleek, rugged look that’s as tough as it is classy. Inside, a solid steel linerlock ensures long-term reliability – especially where it matters most: at the lockbar. The PVD-coated Elmax blade rides on silky-smooth ball bearings and features a finely curved belly with a precise tip. The crowned spine adds a touch of elegance, while the milled detent ramp ensures a satisfying, frictionless close. And yes, the discreet little flipper tab is all it takes to fire the blade into action – with just enough snap to make you smile every single time. The familiar wire clip keeps the knife riding low and discreet in your pocket – because good design doesn’t need to show off. And at this weight? You’ll forget it’s there… until you need it.  Bottom line: The Sonoma V2 is the laid-back Californian version of a high-end EDC – stylish, smart, and infused with just the right amount of Danish design wit. If you’re looking for a lightweight, reliable, and ridiculously good-looking knife, this one’s calling your name. Preferably while you’re sipping a glass of wine.

with AXIS-Lock Micarta handle ClipPoint Magnacut blade with Battlewash finish made in USA

A slipjoint done right. The Slippy Kraken combines smart design, everyday legality, and real cutting performance. Minimalist, modern, and ready for your pocket. Piratech Slippy Kraken – The Slipjoint, Reimagined The Slippy Kraken isn’t a throwback to old-school knives – it’s a bold redesign. Piratech has taken the slipjoint concept, broken it down, and rebuilt it with modern tech and clever engineering. The result is a knife that’s legal to carry in most parts of Germany – and still plays in the top league when it comes to materials and function. This isn’t the knife you carry just because you have to. This is the one you want to carry. Tool-free inlay swapping with MagSnap Thanks to a magnetic mechanism, the inlays stay rock-solid during use but can be changed in seconds – no tools, no hassle. Ideal if you like switching things up from time to time. Recurved backspring meets ergonomic design The spring is reverse-tensioned – sounds weird, feels great. This construction allows for a naturally curved handle without sacrificing mechanical stability. It fits your hand like it was made just for you. 118-degree mid-stop – smarter than the standard Most slipjoints stop at 90 degrees. Sounds fine, but in practice it puts your fingers at risk. The Slippy Kraken uses a 118° stop, meaning the blade is further away from your fingers if it ever starts to close unintentionally. Small detail, big safety bonus – especially when applying thumb pressure or during closing. Spring tension adjustment – your knife, your feel Crisp and snappy or smooth and easy? You decide. The backspring tension is fully adjustable, giving you total control over the action. Compact spring, more usable blade Because of the smart internal design, more space is available for the blade. You’re getting full performance in a slipjoint-friendly format – no compromises necessary. The Slippy Kraken isn’t a backup solution. It’s proof that a slipjoint can be modern, capable, and completely ready for daily carry – with no trade-offs in design, feel, or function.

Alox handle Stainless steel tools functions: Scissors Height: 10 mm Length: 9.4 cm Weight: 44 g

Alox handle Stainless steel tools functions: Scissors Height: 10 mm Length: 9.4 cm Weight: 44 g

Alox handle Stainless steel tools functions: Scissors Height: 10 mm Length: 9.4 cm Weight: 44 g

The Swiss Army Knife for the Now We live in the age of deliveries. Online orders, returns, surprise gifts from your favorite shop – and for all of that, there’s the Victorinox Companion. Let’s be honest: the box opener is the tool of our time. The Companion blends classic Swiss Army quality with a smart, everyday-ready toolset. Alongside a large blade, scissors, and screwdrivers, you get what you actually need: a dedicated package opener – precise, safe, and gentle on your cardboard boxes. And because Victorinox knows that function doesn’t mean boring, the Companion comes in stylish "Live to Explore" editions – from urban New York to charming Paris. Bonus: a built-in ballpoint pen, toothpick, tweezers, and more. Swiss Made, of course. Height: 18 mm Length: 91 mm Weight: 82 g

Chris Reeve Impinda Slipjoint The Impinda is almost a sensation for fans of the Chris Reeve Knives brand. This is mainly due to the fact that the cycles in which Reeve introduce new models can be very long - sometimes we are talking about decades. Now the Impinda is a brand new model on the market, which was designed by Tim Reeve together with knife legend Bill Harsey. The two use the usual design language of the manufacturer and deliver a model that fits seamlessly into the product line of Chris Reeve. By the way, the prototype of this model was a Slipjoint that Harsey built for his son when he started his job at NASA. The great thing about the Impinda is that because the blade is not locked, you can carry this knife with you every day perfectly legally. What's interesting is that while the knife is relatively easy to open, you have to apply significantly more pressure to close it. This is due to the special back spring, which is made of CPM S35VN steel just like the blade. Here it takes about 2.5 Kg of pressure to close the knife again, which ensures safe working. As usual with Reeve, the blade runs on large bronze washers, which allows the blade to run silky smooth. Thanks to the hollow grind, the Impinda proves to be highly cutting and once again shows that Chris Reeve Knives is all about knife performance. Together with the newly designed titanium pocket clip, the Impinda is an all-around cutting tool for those looking for an unlocked pocket knife of the highest manufacturing quality. Bill Harsey - The old school William "Bill" Harsey is a true original of the US knifemaking scene. Born in Oregon in 1955, Harsey has worked with companies such as CRKT, Gerber and Spartan Blades, among others, and is considered one of the most renowned knife makers in the world.Especially his combat knives for the Army Special Forces and the collaboration with Chris Reeve on models such as the "Green Baret" released in 2003 or the "Pacific" from 2007, achieved great fame. Accessories: Chris Reeve replacement clip for Impinda Chris Reeve Body Screw KitChris Reeve Grease

The Knife Without a Blade Some tools shout for attention. This one? It whispers. The Victorinox Companion S Alox is made for those who want an everyday multitool – but can do without the blade. Designed with travel, events, and public spaces in mind, it's meant for places where knives might cause issues. Of course, there's no guarantee it’ll be accepted everywhere – but it's a strong step in the right direction. Instead of a blade, you get a sharp precision scissors – more useful than you'd think. Plus a smart combo tool that works as a bottle opener, wire stripper, and Phillips screwdriver. All that in a sleek 58 mm format, wrapped in lightweight yet durable Alox scales that look just as good as they feel. Perfect for those who: – want a functional tool where blades aren’t allowed – prefer a minimalist and stylish EDC solution – know that sometimes, a good pair of scissors is all you need Available in silver, gold, or red – the Companion S makes a quiet statement with a lot of intent. Quick Facts: Blade-free – designed for sensitive environments Precision scissors & smart multi-tool (opener, wire stripper, screwdriver) Durable Alox scales – sleek, light, and robust Ultra-compact (58 mm) – ideal for keychains or pockets Swiss Made – backed by Victorinox’s lifetime warranty Bottle opener Wire strippers Phillips screwdriver 0/1, magnetic Scissors Key ring Height: 6 mm Length: 58 mm Weight: 17 g

The Knife Without a Blade Some tools shout for attention. This one? It whispers. The Victorinox Companion S Alox is made for those who want an everyday multitool – but can do without the blade. Designed with travel, events, and public spaces in mind, it's meant for places where knives might cause issues. Of course, there's no guarantee it’ll be accepted everywhere – but it's a strong step in the right direction. Instead of a blade, you get a sharp precision scissors – more useful than you'd think. Plus a smart combo tool that works as a bottle opener, wire stripper, and Phillips screwdriver. All that in a sleek 58 mm format, wrapped in lightweight yet durable Alox scales that look just as good as they feel. Perfect for those who: – want a functional tool where blades aren’t allowed – prefer a minimalist and stylish EDC solution – know that sometimes, a good pair of scissors is all you need Available in silver, gold, or red – the Companion S makes a quiet statement with a lot of intent. Quick Facts: Blade-free – designed for sensitive environments Precision scissors & smart multi-tool (opener, wire stripper, screwdriver) Durable Alox scales – sleek, light, and robust Ultra-compact (58 mm) – ideal for keychains or pockets Swiss Made – backed by Victorinox’s lifetime warranty Bottle opener Wire strippers Phillips screwdriver 0/1, magnetic Scissors Key ring Height: 6 mm Length: 58 mm Weight: 17 g

The Knife Without a Blade Some tools shout for attention. This one? It whispers. The Victorinox Companion S Alox is made for those who want an everyday multitool – but can do without the blade. Designed with travel, events, and public spaces in mind, it's meant for places where knives might cause issues. Of course, there's no guarantee it’ll be accepted everywhere – but it's a strong step in the right direction. Instead of a blade, you get a sharp precision scissors – more useful than you'd think. Plus a smart combo tool that works as a bottle opener, wire stripper, and Phillips screwdriver. All that in a sleek 58 mm format, wrapped in lightweight yet durable Alox scales that look just as good as they feel. Perfect for those who: – want a functional tool where blades aren’t allowed – prefer a minimalist and stylish EDC solution – know that sometimes, a good pair of scissors is all you need Available in silver, gold, or red – the Companion S makes a quiet statement with a lot of intent. Quick Facts: Blade-free – designed for sensitive environments Precision scissors & smart multi-tool (opener, wire stripper, screwdriver) Durable Alox scales – sleek, light, and robust Ultra-compact (58 mm) – ideal for keychains or pockets Swiss Made – backed by Victorinox’s lifetime warranty Bottle opener Wire strippers Phillips screwdriver 0/1, magnetic Scissors Key ring Height: 6 mm Length: 58 mm Weight: 17 g