Böker Barlow Prime Tirpitz Damascus
to the original model clearly more compact
blade with a modern, elongated ricasso
Damascus made from the armor of the Tirpitz
hand forged Damascus blade
handle made of micarta and walnut wood
without liner
with decorative nickel silver rivets
with stainless steel blade axle screw
with high quality felt case
Haiku Kurouchi Santoku
Santoku, blade length 16.5 cm Hardness circa 61 degrees Rockwell The non-stainless knife can tarnish quickly due to moisture, thus forming a natural patina on the blade. This patina does NOT affect the performance of your CHROMA Haiku Kurouchi knife, only the appearance.
Kai Shun Santoku Knife
Blade length: 7" (18 cm) Handle length: 12.2 cm Blade material: 32-layer Damascus steel Grinding: double-sided Handle material: laminated Pakka wood Blade hardness: 61±1 HRC Application: suitable for all purposes. The traditional Japanese all-purpose knife (Santoku) is the most popular knife in Japan. However, it is just as suitable for European cuisine.
Otter Mercator Knife
A piece of knife history
Built for over 140 years
Original cat logo
Stainless 1.4043 steel
Well-tried and still greatThe Otter Mercator is an absolute legend among pocket knives. Also known as the "K55K" or "Black Cat Knive", the Mercator gained international fame especially after World War II when American GIs brought the folding knives back to the US from Germany.
However, the knife - which we now know as the "Mercator" - has been manufactured since imperial times in the late 19th century and was also used by soldiers in the German Army during World War I. Since then, it has been manufactured unchanged to this day, as the company Heinrich Kaufmann & Söhne registered it in 1867 as a Deutsches Reich Gebrauchsmuster. The abbreviation "K55K" stands for Kaufmann, Hochstr. 55, Katze. The US soldiers simply called the knife Black Cat Knife, which is a bit inaccurate. While the folded sheet steel handle is completely powder coated in black, the stamped cat is hand painted in gold color, then as now. Since 1995, the knife has been faithfully built by Otter under the Mercator name, and its design has changed almost not a bit in over 140 years by now.
The backlock construction is a rather simple but extremely reliable design that can withstand harder use, but is still easy to use. The long blade is constructed of either stainless 1.4043 or - true to the original - non-stainless C75 carbon steel. The extremely flat design ensures that the Mercator is not a bit bulky in the pocket and is very easy to guide.
Kai Shun Premier chef's knife
For the trend-setting Shun Premier Tim Mälzer series, KAI developed more knives from 32 layers of corrosion-resistant Damascus steel. This is finished with a hand-hammered finish known in Japan as Tsuchime, combining timeless aesthetics and ultimate sharpness. The blades feature a solid core of VG MAX steel with a hardness rating of 61±1 HRC.
True to Tim Mälzer's premise: "A good knife not only makes work easier, it also helps you succeed", each of the carefully crafted damask knives has been meticulously matched to its respective field of application by the Japanese forging artists from Seki City. All shapes also guarantee precise cutting performance for both right-handed and left-handed users due to the particularly symmetrical shape of their walnut handle.
Blade length: 8", 20 cm Handle length: 12 cm
Giantmouse ACE Riv Blackout
Titanium Framelock
Brass handle
M390
Made by Reate
Little mouse
With the Riv, GiantMouse present a model that fans of somewhat more compact knives in particular have long been waiting for. What may look like a Biblio washed too hot at first glance is actually much more.
Visually, the Riv is clearly reminiscent of its big brother at first, but it also fulfills the long-held desire of many fans of Jesper Voxnaes to get a high-end version of the CRKT Pilar - there is a certain similarity here as well. The basic idea behind the Riv was to offer a pocket knife that is small enough to really carry with you wherever you go. Despite the compact dimensions, however, the knife should still be a full-fledged cutting tool that can be used properly.
The handle of the Riv is designed as a framelock, and it's no surprise that an exceedingly good-looking and popular combination of materials is used here in the form of titanium and micarta. To prevent wear in the lock, the lockbar was provided with a stainless steel insert, which also serves as an internal overtravel guard, so that the lock can not be accidentally overstretched when opening. Typical for GiantMouse is the curved wire clip, which allows the knife to disappear deep and barely visible in the pocket.
For the blade, the manufacturer once again relies on the proven CPM-20CV steel from Böhler, which provides excellent cutting performance and is extremely resistant to rust and corrosion and with its stonewash finish gives a great image.The knife is opened either via the thumb hole or the small flipper tab, which allows the ball-bearing blade to shoot out of the hilt.
Like all GiantMouse knives, the Riv was named after a special place.
After boss and founder of the brand, Jim Wirth, moved from California to East Lansing/ Michigan in 2020, he remembered a small pub he had visited often as a student at Michigan State University: The Riv. That pub still exists today and will be the breeding ground for many imaginative evenings together for Wirth, Ansø and Voxnaes in the future.
Like the GiantMouse Sonoma, the Riv is entirely manufactured by Reate.
Nesmuk Exclusive C90 Makassar Ebony Wood
unique kitchen knife with noble ebony handle
blade made of hand-forged wild damask (210 layers)
hollow ground on one side
technical data
blade length:
18 cm
Blade material:
Damascus steel (210 layers)
handle material:
ebony burl
Dishwasher safe:
No
Vero Fulcrum Blackwashed (Full Size Version)
Prybar and bit holder
made of titanium
with clip and micro bits
DLC coated and stonewashed
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips.
Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
13.2 cm
Width:
1.65 cm
Material:
titanium
Weight:
42 g
Finish:
Blackwashed
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Opinel pruning saw
A proven classic from Opinel is the folding tree saw. The saw blade can be locked by the so-called Virobloc system with a turn of the safety ring, as is the case with most Opinel knives. Due to the two-sided milling of the saw blade, an enormously high performance can be achieved with this saw.
Das Huntsman gehört mit seiner Schere und der Holzsäge zu unseren meist verkauften Victorinox Taschenmesser.Die Nussbaum-Schalen geben den 13 nützlichen Funktionen einen edlen Rahmen.Werkzeuge:1. Große Klinge 8. Stech-Bohr-Nähahle2. Kleine Klinge 9. Korkenzieher3. Dosenöffner 10. Schere4. Schraubendreher (3 mm) 11. Holzsäge5. Kapselheber 12. Mehrzweckhaken6. Schraubendreher 13. Ring
Abmessungen:Länge: 91 mmHöhe: 18 mmGewicht: 95 g
Sebenza 31 Lefthand
available in Large or Small
Reeve Integral Lock with ceramic ball on the lockbar
Blade steel: CPM S35 VN
Clip Design: Off-set (on the 31 the clip is now diagonal and no longer straight)
Actually, the Large Sebenza 31 should be available from the end of October. Unfortunately the delivery is delayed.
Chris Reeve is so busy that they are behind schedule. I'm afraid we won't get the Sebenza 31 until 2020. :(
When the end of the Sebenza 21 was proclaimed in June 2019 and its successor, the Sebenza 31, was introduced, this news went through the knife scene like a drumbeat. After all, new introductions of the manufacturer from Idaho are already very rare. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.
First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye.
Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar.
In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series.
Accessories:
Chris Reeve Clip Insert and Screw
Chris Reeve Backspacer
Chris Reeve Body Screw Kit
Chris Reeve Pocket Clip
Chris Reeve Grease
Chris Reeve Body Screw
Chris Reeve Lanyard classic for Sabenza and Umnumzaan
Lanyard Pin
Schnitzel UNU child carving knife pink
For children approx. 4 - 10 years
non-slip and contoured G10 handle scales for safe handling
rounded blade tip but sharp blade edge
with Kydex sheath
Bread saw cherry with polished shaft
Handle: cherryRivets: AluminumBlade: stainlessSurface: blue grittedBlade length: approx. 220 mm / 8.5 inchesTotal length: approx. 345 mm
The elegant blade shape with its slight back sweep goes back to the style of the early 1920s.The hand-ground polished shaft with the extremely high teeth and the thin scabbard ensure exceptional cutting quality. The individual teeth on the cutting edge are thinner than conventional serrations. This makes them many times sharper, but also somewhat more sensitive. Small burrs that can form in the individual teeth during use are completely normal with this serrated edge and do not detract from the high cutting ability. The result of all these features is an incredibly sharp, durable bread saw knife.Its light weight allows for easy and comfortable handling. The aesthetics and function of this bread saw makes cutting bread a daily pleasure, without a sea of crumbs.
Spyderco McBee
Jonathan McNees Design
CTS-XHP steel
Titanium Framelock
Bee buzzing around
The Spyderco McBee (designed by Jonathan McNee) polarizes without a doubt. Even we in the team don't agree whether this little stinger is one of the most ingenious EDC knives ever or whether we are dealing with the "Fiat Multipla" of the knife scene.
Whether you like this little stinger or not, it remains to be said that the McBee is incredibly well made and designed. The short blade, somewhat reminiscent of a Wharncliff shape, is made of the extremely cut-resistant CTS-XHP steel. This is not completely stainless; the blade should therefore be cleaned with a little oil every now and then. Good ergonomics are ensured by the generous recess on the back of the blade, which offers sufficient space for placing the index finger. This allows extremely precise cuts to be made with complete ease.
The handle of the McBee is completely milled from titanium and designed as a framelock. A real eye-catcher is the hammer finish on the lockbar cutout and on the axle screw. Here you can see that Spyderco still go to the last detail even on such a small knife. At only 48gr, the McBee is absolutely predestined to travel with you as a faithful companion in the fifth pocket of your jeans. Thanks to the clip, the knife sits securely and tightly on the hem of the pants.
Sure - a log batonieren or a piece of game supply one would not expect such a small knife. But if you're looking for a small box cutter, a sturdy backup knife or simply a cool EDC item, the McBee is right up front.
Giantmouse GMF1 Classic
Does it always have to be a folding knife?
We say: No! In recent years, one type of knife has become particularly popular: the small pocket fixed blade.
With the GiantMouse GMF1-C you get a small but incredibly sturdy knife that comes with a well fitted, hand made in Italy leather sheath to carry in your pocket or on the belt.
With a total length of only 138 mm and its low weight, this small fixed blade knife hardly takes up any space. The entire knife is milled from one solid piece of Böhler N690 steel, which is considered to be one of the most versatile steels of our time.The highly rust-resistant steel alloy has the ability to hold an edge for a very long time. While still being relatively easily to resharpen the GMF1-C can master the cutting tasks of everyday life with flying colors.
The skeletonized handle of the GMF1 has deliberately not been equipped with scales, which of course has a positive effect on weight cutting, but also allows you to apply a Paracord wrapping of your choice. Thanks to the slightly curved handle, the GMF1-C fits very well in the hand - only very large hands might have difficulties here and could use a lanyard for additional support.
Kai Shun Tomato Knife
Blade length: 6.0" (15 cm), handle length: 10.4 cm, blade material: 32-layer Damascus steel, grind: double-sided, handle material: laminated Pakka wood, blade hardness: 61±1 HRC Application: For peeling, cutting, cleaning and garnishing fruits and vegetables, for preparing meat by separating fat and tendons and by larding.
