Go to homepage Go to homepage
follow knifelounge

Chris Reeve Sebenza 31 Plain Linkshand

Skip image gallery
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand
Small Sebenza 31 Lefthand

€505.00*

Oh NO - I am not in stock right now! 😞

Size
Product number: S31-1001LH

Sebenza 31 Lefthand

  • available in Large or Small
  • Reeve Integral Lock with ceramic ball on the lockbar
  • Blade steel: CPM S35 VN
  • Clip Design: Off-set (on the 31 the clip is now diagonal and no longer straight)

Actually, the Large Sebenza 31 should be available from the end of October. Unfortunately the delivery is delayed.

Chris Reeve is so busy that they are behind schedule.
I'm afraid we won't get the Sebenza 31 until 2020. :(

When the end of the Sebenza 21 was proclaimed in June 2019 and its successor, the Sebenza 31, was introduced, this news went through the knife scene like a drumbeat. After all, new introductions of the manufacturer from Idaho are already very rare. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.

First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye.

Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar.

In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series.

Accessories:

  • Chris Reeve Clip Insert and Screw
  • Chris Reeve Backspacer
  • Chris Reeve Body Screw Kit
  • Chris Reeve Pocket Clip
  • Chris Reeve Grease
  • Chris Reeve Body Screw
  • Chris Reeve Lanyard classic for Sabenza and Umnumzaan
  • Lanyard Pin

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Warning / Safety Notice:

Risk of cuts: The most common hazard when using knives is the risk of cuts. Sharp blades can easily penetrate skin and tissue.

Blade slippage: Improper handling or applying excessive force may cause the knife to slip, leading to uncontrolled movements and potential injury.

Injuries from falling knives: Knives should never be left unsecured or placed near the edge of tables or work surfaces, as they may fall and cause injury.

Dull blades: Dull knives pose a higher risk of injury, as they require more force and are more likely to slip. Knives should therefore be sharpened regularly and properly.

Improper use: Using a knife for purposes other than its intended use (e.g. as a prying tool) can damage the blade and may result in accidents.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Chris Reeve Knives
2949 South Victory View Way
83709 Boise Idaho, USA
Details of the responsible person (information obligations under the GPSR Product Safety Regulation)
Altonaer Silberwerkstatt
Holstenstraße 188
22765 Hamburg, Deutschland
494038614858
Skip product gallery

Similar Items

Chris Reeve Impinda – Image 1
Chris Reeve Impinda
Chris Reeve Impinda Slipjoint The Impinda is almost a sensation for fans of the Chris Reeve Knives brand. This is mainly due to the fact that the cycles in which Reeve introduce new models can be very long - sometimes we are talking about decades. Now the Impinda is a brand new model on the market, which was designed by Tim Reeve together with knife legend Bill Harsey. The two use the usual design language of the manufacturer and deliver a model that fits seamlessly into the product line of Chris Reeve. By the way, the prototype of this model was a Slipjoint that Harsey built for his son when he started his job at NASA. The great thing about the Impinda is that because the blade is not locked, you can carry this knife with you every day perfectly legally. What's interesting is that while the knife is relatively easy to open, you have to apply significantly more pressure to close it. This is due to the special back spring, which is made of CPM S35VN steel just like the blade. Here it takes about 2.5 Kg of pressure to close the knife again, which ensures safe working. As usual with Reeve, the blade runs on large bronze washers, which allows the blade to run silky smooth. Thanks to the hollow grind, the Impinda proves to be highly cutting and once again shows that Chris Reeve Knives is all about knife performance. Together with the newly designed titanium pocket clip, the Impinda is an all-around cutting tool for those looking for an unlocked pocket knife of the highest manufacturing quality. Bill Harsey - The old school William "Bill" Harsey is a true original of the US knifemaking scene. Born in Oregon in 1955, Harsey has worked with companies such as CRKT, Gerber and Spartan Blades, among others, and is considered one of the most renowned knife makers in the world.Especially his combat knives for the Army Special Forces and the collaboration with Chris Reeve on models such as the "Green Baret" released in 2003 or the "Pacific" from 2007, achieved great fame. Accessories: Chris Reeve replacement clip for Impinda Chris Reeve Body Screw KitChris Reeve Grease

€595.00
Details