42a-Compliant Knives at the Knife Lounge

Tommy Ward design  G10 handle Magnacut blade with stonewash finish Kydex sheath included Handmade by Boker USA in Denver, Colorado

A Gateway slipjoint with a coffin look October in Hamburg. Fog is rolling in from the harbour, and in St. Pauli the first plastic skeleton is hanging in a shop window. Jack Wolf Knives has timed this well: the Coffin is a slipjoint whose handle looks like a little coffin. Macabre? Okay, a bit. In the hand, though, it feels surprisingly cosy. The coffin pattern is an old friend among traditionals. The handle tapers towards both ends and breaks into angular corners along the sides, and it’s exactly this silhouette that gave the pattern its name. Ben Belkin, founder and designer of Jack Wolf Knives in Scottsdale, Arizona, has carefully modernised the shape. A keystone shield in the handle scale shows where it all comes from. Gateway – your way into the Jack Wolf world The Coffin is part of the Gateway series, and the name is meant literally: Gateway is the front door to Jack Wolf and to traditional pocket knives in general. Price-wise, the series sits well below the premium models, yet it holds its own on fit and finish. To get there, Jack Wolf relies on modern manufacturing. Where old pocket knives are often built from thin stamped parts, Gateway parts are made from thicker steel on CNC mills and wire EDM machines, with integrally milled bolsters. Liners and backspring are joined without any gaps, and the handle scales are fitted with absolute precision. The nickel silver pins you see on the outside work as decoration and alignment aid at the same time. Assembly and final finishing, right down to the finished edge, are done by hand. Blade and dimensions The blade is flat ground from Sandvik 14C28N, hardened to 58–59 HRC. The steel is stainless, takes a fine edge and is back on track with a few passes on the stone after a week of parcel tape. A 72.4 mm blade with 63.3 mm of cutting edge at 2.5 mm thick – easily enough for your lunchtime sandwich and the post. Closed, the Coffin measures 90.2 mm and weighs around 58 g (with slight differences depending on the variant). You’ll barely notice it in your jeans pocket, even next to your keys. The handle scales come in several variants, including canvas Micarta and smooth black bone. Slipjoint action It opens the classic way, via the nail nick. The backspring holds the blade open, there’s a half stop on the way, and there is no lock. The Coffin is made for anyone who has been carrying flippers and liner locks so far and wants to find out what traditionals are all about. And if you already have a few Jack Wolfs in your setup, this is one that doesn’t need to be kept for best. Coffin open, blade out, apple sliced. October doesn’t get any spookier than that.

Böker Plus Extension Knife – The Wildest Two-Hand Knife Out There! Extension knives have a long tradition in hunting – and this is Böker’s modern take on it. In the folded position, the handle covers exactly half of the blade, leaving the other half exposed. But here’s where it gets fun: flip this beast open and you’ve got an impressive 18.5 cm D2 blade ready to take on the big tasks.  And for all the tech nerds: this thing locks up both open and closed with a massive crossbolt, which can even be screwed into the handle (no tools needed) for even more strength. Since it’s a true two-hand opener, it’s fully legal to carry under German § 42a – even with that monster blade length. The handle, made from thick steel liners and milled G10, is a modern nod to the double-T grips of medieval Baselards. At the end, you’ve got a proper glass breaker/striker for versatile use. The whole package comes with a perfectly fitted Kydex sheath. In short: the Böker Plus Extension Knife is probably the only modern interpretation of this classic knife style – and an absolute must-have for anyone who loves clever engineering and big blades.

Chris Reeve Inyoni Black Canvas Micarta Drop Point  Drop Point Blade Micarta handle detachable handles with Kydex sheath

Overland X – The Big Adventure Starts in Your Hand Question: What’s razor-sharp, uncompromisingly cool, built for any terrain – and looks like it belongs on an overland truck somewhere in Utah rather than sitting in your kitchen drawer? Exactly – the Overland X by TJ Schwarz. This isn’t your delicate sandwich slicer – it’s a true adventure tool, made to follow you anywhere: into the woods, down to the lake, into the workshop, or straight through your daily grind. At just under 20 cm in overall length, the Overland X is basically the big brother of the Overland Sport – more handle, more blade, more “bring it on!” The Magnacut steel ensures maximum edge retention, corrosion resistance, and toughness – everything you need when you’re actually putting your gear to work (or, let’s be honest, taking those outdoor Insta shots). Visually, it’s pure joy: choose between black or green Micarta handle scales, both paired with black hardware for that stealth look. The ergonomics? Spot on – solid, grippy, and built to last, just like you’d expect from the Overland Sport. Of course, it comes with a custom-fit Kydex sheath that locks in with that satisfying “click” you can almost hear before you even sheathe it. In short: the Overland X isn’t a desk knife. It’s your go-anywhere, do-anything buddy – proudly made in Boise, Idaho.

Overland X – The Big Adventure Starts in Your Hand Question: What’s razor-sharp, uncompromisingly cool, built for any terrain – and looks like it belongs on an overland truck somewhere in Utah rather than sitting in your kitchen drawer? Exactly – the Overland X by TJ Schwarz. This isn’t your delicate sandwich slicer – it’s a true adventure tool, made to follow you anywhere: into the woods, down to the lake, into the workshop, or straight through your daily grind. At just under 20 cm in overall length, the Overland X is basically the big brother of the Overland Sport – more handle, more blade, more “bring it on!” The Magnacut steel ensures maximum edge retention, corrosion resistance, and toughness – everything you need when you’re actually putting your gear to work (or, let’s be honest, taking those outdoor Insta shots). Visually, it’s pure joy: choose between black or green Micarta handle scales, both paired with black hardware for that stealth look. The ergonomics? Spot on – solid, grippy, and built to last, just like you’d expect from the Overland Sport. Of course, it comes with a custom-fit Kydex sheath that locks in with that satisfying “click” you can almost hear before you even sheathe it. In short: the Overland X isn’t a desk knife. It’s your go-anywhere, do-anything buddy – proudly made in Boise, Idaho.

Schwarz Knives Overland SportThe little brother of the Schwarz Knives OverlandSmall fixed with an overall length of 16.8 cmMagnacut steelMADE in Idaho USA. Sporty & ColorfulQuestion: what's wicked sharp, insanely pretty, beastly well made and comes from Boise/Idaho? Chris Re...NO! So it does, but that's not what this is about. It's about the knives from TJ Schwarz; to be precise about the Overland Sport. Here you get a compact EDC Fixed that has all the features mentioned above. The workmanship is breathtakingly good and the grinding is decidedly sharp!The Overland Sport is intended as a kind of GADA knife: go anywhere, do anything. Whether on the belt, in the pocket or in the backpack - this 42a-compliant knife can simply always be there. With its 16.8 cm overall length this fixed falls into the "sweet spot" of fixed EDC knives, so to speak. The steel is, of course, the omnipresent Magnacut, which is not only extremely rust-resistant, but also extremely cut.Optically, the Overland Sport is something for everyone: a whole three variants are available to you. In addition to a Stonewashed or Cerakote blade finish, you can choose between colored G10 and Micarta scales. The Overland Sport comes with a Kydex sheath that snaps snugly into place.

Schwarz Knives Overland SportThe little brother of the Schwarz Knives OverlandSmall fixed with an overall length of 16.8 cmMagnacut steelMADE in Idaho USA. Sporty & ColorfulQuestion: what's wicked sharp, insanely pretty, beastly well made and comes from Boise/Idaho? Chris Re...NO! So it does, but that's not what this is about. It's about the knives from TJ Schwarz; to be precise about the Overland Sport. Here you get a compact EDC Fixed that has all the features mentioned above. The workmanship is breathtakingly good and the grinding is decidedly sharp!The Overland Sport is intended as a kind of GADA knife: go anywhere, do anything. Whether on the belt, in the pocket or in the backpack - this 42a-compliant knife can simply always be there. With its 16.8 cm overall length this fixed falls into the "sweet spot" of fixed EDC knives, so to speak. The steel is, of course, the omnipresent Magnacut, which is not only extremely rust-resistant, but also extremely cut.Optically, the Overland Sport is something for everyone: a whole three variants are available to you. In addition to a Stonewashed or Cerakote blade finish, you can choose between colored G10 and Micarta scales. The Overland Sport comes with a Kydex sheath that snaps snugly into place.

Schwarz Knives Overland SportThe little brother of the Schwarz Knives OverlandSmall fixed with an overall length of 16.8 cmMagnacut steelMADE in Idaho USA. Sporty & ColorfulQuestion: what's wicked sharp, insanely pretty, beastly well made and comes from Boise/Idaho? Chris Re...NO! So it does, but that's not what this is about. It's about the knives from TJ Schwarz; to be precise about the Overland Sport. Here you get a compact EDC Fixed that has all the features mentioned above. The workmanship is breathtakingly good and the grinding is decidedly sharp!The Overland Sport is intended as a kind of GADA knife: go anywhere, do anything. Whether on the belt, in the pocket or in the backpack - this 42a-compliant knife can simply always be there. With its 16.8 cm overall length this fixed falls into the "sweet spot" of fixed EDC knives, so to speak. The steel is, of course, the omnipresent Magnacut, which is not only extremely rust-resistant, but also extremely cut.Optically, the Overland Sport is something for everyone: a whole three variants are available to you. In addition to a Stonewashed or Cerakote blade finish, you can choose between colored G10 and Micarta scales. The Overland Sport comes with a Kydex sheath that snaps snugly into place.

Raven’s Bornas – Nordic Wave It's been almost two years since the first Raven’s Bornas was released. Now WESN has handed the helm back to Sam, aka Raven the Pirate, and the two have given their collaborative fixed blade another makeover. The result is called Raven’s Bornas: Nordic Wave. The foundation remains the Bornas, WESN’s compact full-tang fixed blade, meaning the steel runs all the way from the tip to the end of the handle. For the blade, WESN uses CPM S35VN with a black PVD coating. You'll probably recognize this steel from plenty of high-end mid-tech knives. It holds an edge for a long time while still being relatively easy to sharpen. And being stainless, it couldn't care less about Hamburg's endless drizzle. The WESN logo sits on the front, while Raven has left his laser-engraved mark on the reverse side. The real update is the handle. Both scales are made from titanium and finished entirely in black. A CNC-machined wave pattern draws inspiration from Viking runestones and Nordic ornamentation. On the original Bornas, only the front was engraved. This time, the entire surface features a raised relief pattern. You'll notice the difference as soon as you run your thumb across it: the texture provides extra grip, even with cold or wet fingers. And it looks like a Norseman with an incredible amount of patience somehow got his hands on a CNC machine. The knife comes with a black Kydex sheath with a belt clip, the second major difference from the original release, which came with a leather sheath. Kydex clicks securely into place and doesn't mind getting caught in the rain. There's also a specially designed matte black box with gold foil detailing. So what's it actually for? The Bornas is a small fixed blade designed for everyday carry and outdoor adventures. Opening packages or slicing an apple during a picnic on the banks of the Elbe – neither requires a folding mechanism, and a full-tang knife can handle a little extra pressure when needed. With a blade length of approximately 7 cm, it sits comfortably below Germany's 12 cm limit. Fixed blades of this size are not subject to the general carry restrictions under Section 42a of the German Weapons Act (WaffG), meaning you can generally carry one in everyday life, subject to any additional local restrictions. Who's it for? Anyone looking to add a compact fixed blade with excellent materials to their EDC kit, or anyone who's a true fan of Raven the Pirate. Please note:Orders will ship during the week of October 12.

Damascus steel and bone handle CPM-S90V blade Collector's knife: limited-edition anniversary model

Yes, it’s exactly what it looks like. This is where things get gloriously unreasonable: the Victorinox Picknicker with titanium scales in Cross Cut pattern. Already mounted and ready to go! And yes, these scales cost several times what the knife itself does. Why it still makes sense? Well – because we can! The Picknicker is easily one of the most underrated Vics in the line-up. Enough blade for a whole loaf, a liner lock that holds rock solid and a shape that never looks aggressive. What the Picknicker always lacked was a bit of bling. Titanium with a Cross Cut pattern on both sides, stonewashed of course – it doesn’t just look great, it also gives you serious grip, even with greasy butter fingers.

JRW Gear Traitor Jamie Williams Design Richlite handlesWharncliffe blade made of Magnacut with stonewash finish Kydes sheath with Beltloops includedMade by Tactile Knife in Texas, USA There are simply knives that look so futuristic that they could have come straight from a movie set. If Cooper had worn the Traitor from JRW Gear as part of his equipment in Interstellar, it would certainly have looked authentic in the film. The Traitor looks a bit special at first glance. Few curves, but many clear angles, a very conspicuously shaped (cyber) sheepfoot blade and four lanyard holes - old school is different! However, when you take the Traitor in your hand, it immediately becomes clear how well thought out the design is. The handle nestles fantastically in the palm of the hand and the thumb automatically slips into the large hollow on the back of the blade milled from Magnacut steel. The bolted Richlite handle scales provide a great grip and thanks to the various lanyard holes, you have a variety of options for positioning a small safety strap.  The compact size and the amazingly low weight, make the Traitor an absolutely EDC-fixed suitable for everyday use. By the way, the knife is produced by the guys from Tactile Knife.

JRW Gear Traitor Jamie Williams Design Richlite handlesWharncliffe blade made of Magnacut with stonewash finish Kydes sheath with Beltloops includedMade by Tactile Knife in Texas, USA There are simply knives that look so futuristic that they could have come straight from a movie set. If Cooper had worn the Traitor from JRW Gear as part of his equipment in Interstellar, it would certainly have looked authentic in the film. The Traitor looks a bit special at first glance. Few curves, but many clear angles, a very conspicuously shaped (cyber) sheepfoot blade and four lanyard holes - old school is different! However, when you take the Traitor in your hand, it immediately becomes clear how well thought out the design is. The handle nestles fantastically in the palm of the hand and the thumb automatically slips into the large hollow on the back of the blade milled from Magnacut steel. The bolted Richlite handle scales provide a great grip and thanks to the various lanyard holes, you have a variety of options for positioning a small safety strap.  The compact size and the amazingly low weight, make the Traitor an absolutely EDC-fixed suitable for everyday use. By the way, the knife is produced by the guys from Tactile Knife.

Sunday afternoon, the telly is on, and in the western the man in the hat has a Bowie hanging off his belt. You were maybe ten, knew nothing about steel and still knew straight away that you wanted one too. The silhouette goes back to the Sandbar Fight of 1827, but it grew up on the big screen. Jakeb Ginsberg scaled that shape down for Jack Wolf Knives to a size that actually works in a trouser pocket. The Bordertown Bowie is a compact fixed blade with a clip point blade: 17.6 cm overall, 8.75 cm of that blade at 3 mm stock. Depending on the version it weighs between 62 and 82 g. Sounds like nothing, but it sits surprisingly solid in your hand, because the handle has enough “belly” that you don’t have to work with your fingertips. The hollow-ground blade is Crucible CPM S90V, hardened to 60 – 61 HRC. That steel is known for holding an edge until you start wondering when you last sharpened anything. You work your way through weeks of parcel tape and cut the odd fish roll down on the pontoon before the stone is allowed back to work. Behind the edge the blade runs thin, which is why the cut feels closer to a scalpel than to a cleaver. Carry, sheath, § 42a The leather sheath has an integrated clip, so the knife either rides on your belt or disappears deep in your pocket. That is exactly the point for a lot of people: a fixed blade without any Kydex rattle, something you pocket in the morning and then forget about. And yes, you are allowed to carry it. § 42a of the German Weapons Act draws the line for fixed blades at 12 cm of blade length, and at 8.75 cm the Bordertown stays clearly below that, which makes it § 42a compliant. Four versions and the rest of the kit There is also a snake knot lanyard with a titanium bead, colour-matched to each version. And the VHS-format box with an illustration by Sean Tiffany that honestly deserves its own spot in the display cabinet. You can choose between Fat Carbon Arctic Storm, Titanium Crystalized Purple, Titanium Starburst Bronze and Bordeaux Jute Micarta. The two titanium versions bring a bit more weight and sparkle in return, while carbon and micarta are the lightweights in the field. The man in the hat would have given up his horse for it. All you need is a pocket.

Sunday afternoon, the telly is on, and in the western the man in the hat has a Bowie hanging off his belt. You were maybe ten, knew nothing about steel and still knew straight away that you wanted one too. The silhouette goes back to the Sandbar Fight of 1827, but it grew up on the big screen. Jakeb Ginsberg scaled that shape down for Jack Wolf Knives to a size that actually works in a trouser pocket. The Bordertown Bowie is a compact fixed blade with a clip point blade: 17.6 cm overall, 8.75 cm of that blade at 3 mm stock. Depending on the version it weighs between 62 and 82 g. Sounds like nothing, but it sits surprisingly solid in your hand, because the handle has enough “belly” that you don’t have to work with your fingertips. The hollow-ground blade is Crucible CPM S90V, hardened to 60 – 61 HRC. That steel is known for holding an edge until you start wondering when you last sharpened anything. You work your way through weeks of parcel tape and cut the odd fish roll down on the pontoon before the stone is allowed back to work. Behind the edge the blade runs thin, which is why the cut feels closer to a scalpel than to a cleaver. Carry, sheath, § 42a The leather sheath has an integrated clip, so the knife either rides on your belt or disappears deep in your pocket. That is exactly the point for a lot of people: a fixed blade without any Kydex rattle, something you pocket in the morning and then forget about. And yes, you are allowed to carry it. § 42a of the German Weapons Act draws the line for fixed blades at 12 cm of blade length, and at 8.75 cm the Bordertown stays clearly below that, which makes it § 42a compliant. Four versions and the rest of the kit There is also a snake knot lanyard with a titanium bead, colour-matched to each version. And the VHS-format box with an illustration by Sean Tiffany that honestly deserves its own spot in the display cabinet. You can choose between Fat Carbon Arctic Storm, Titanium Crystalized Purple, Titanium Starburst Bronze and Bordeaux Jute Micarta. The two titanium versions bring a bit more weight and sparkle in return, while carbon and micarta are the lightweights in the field. The man in the hat would have given up his horse for it. All you need is a pocket.

Sunday afternoon, the telly is on, and in the western the man in the hat has a Bowie hanging off his belt. You were maybe ten, knew nothing about steel and still knew straight away that you wanted one too. The silhouette goes back to the Sandbar Fight of 1827, but it grew up on the big screen. Jakeb Ginsberg scaled that shape down for Jack Wolf Knives to a size that actually works in a trouser pocket. The Bordertown Bowie is a compact fixed blade with a clip point blade: 17.6 cm overall, 8.75 cm of that blade at 3 mm stock. Depending on the version it weighs between 62 and 82 g. Sounds like nothing, but it sits surprisingly solid in your hand, because the handle has enough “belly” that you don’t have to work with your fingertips. The hollow-ground blade is Crucible CPM S90V, hardened to 60 – 61 HRC. That steel is known for holding an edge until you start wondering when you last sharpened anything. You work your way through weeks of parcel tape and cut the odd fish roll down on the pontoon before the stone is allowed back to work. Behind the edge the blade runs thin, which is why the cut feels closer to a scalpel than to a cleaver. Carry, sheath, § 42a The leather sheath has an integrated clip, so the knife either rides on your belt or disappears deep in your pocket. That is exactly the point for a lot of people: a fixed blade without any Kydex rattle, something you pocket in the morning and then forget about. And yes, you are allowed to carry it. § 42a of the German Weapons Act draws the line for fixed blades at 12 cm of blade length, and at 8.75 cm the Bordertown stays clearly below that, which makes it § 42a compliant. Four versions and the rest of the kit There is also a snake knot lanyard with a titanium bead, colour-matched to each version. And the VHS-format box with an illustration by Sean Tiffany that honestly deserves its own spot in the display cabinet. You can choose between Fat Carbon Arctic Storm, Titanium Crystalized Purple, Titanium Starburst Bronze and Bordeaux Jute Micarta. The two titanium versions bring a bit more weight and sparkle in return, while carbon and micarta are the lightweights in the field. The man in the hat would have given up his horse for it. All you need is a pocket.

Sunday afternoon, the telly is on, and in the western the man in the hat has a Bowie hanging off his belt. You were maybe ten, knew nothing about steel and still knew straight away that you wanted one too. The silhouette goes back to the Sandbar Fight of 1827, but it grew up on the big screen. Jakeb Ginsberg scaled that shape down for Jack Wolf Knives to a size that actually works in a trouser pocket. The Bordertown Bowie is a compact fixed blade with a clip point blade: 17.6 cm overall, 8.75 cm of that blade at 3 mm stock. Depending on the version it weighs between 62 and 82 g. Sounds like nothing, but it sits surprisingly solid in your hand, because the handle has enough “belly” that you don’t have to work with your fingertips. The hollow-ground blade is Crucible CPM S90V, hardened to 60 – 61 HRC. That steel is known for holding an edge until you start wondering when you last sharpened anything. You work your way through weeks of parcel tape and cut the odd fish roll down on the pontoon before the stone is allowed back to work. Behind the edge the blade runs thin, which is why the cut feels closer to a scalpel than to a cleaver. Carry, sheath, § 42a The leather sheath has an integrated clip, so the knife either rides on your belt or disappears deep in your pocket. That is exactly the point for a lot of people: a fixed blade without any Kydex rattle, something you pocket in the morning and then forget about. And yes, you are allowed to carry it. § 42a of the German Weapons Act draws the line for fixed blades at 12 cm of blade length, and at 8.75 cm the Bordertown stays clearly below that, which makes it § 42a compliant. Four versions and the rest of the kit There is also a snake knot lanyard with a titanium bead, colour-matched to each version. And the VHS-format box with an illustration by Sean Tiffany that honestly deserves its own spot in the display cabinet. You can choose between Fat Carbon Arctic Storm, Titanium Crystalized Purple, Titanium Starburst Bronze and Bordeaux Jute Micarta. The two titanium versions bring a bit more weight and sparkle in return, while carbon and micarta are the lightweights in the field. The man in the hat would have given up his horse for it. All you need is a pocket.

The GMF1 for the cutting board Cooking on the road rarely fails because of the recipe. It fails because of the blunt thing sitting in the holiday flat’s drawer or in the camper – or because you’re trying to get onions into even rings with your EDC folder. The GMF1-Chef takes the familiar GMF1 platform and points it at food prep. The blade is noticeably taller, so your fingers stay off the board when you rock through a cut, and it’s made from Nitro-B, a nitrogen-alloyed stainless steel from GiantMouse’s kitchen knife line. In practice that means lemon juice, tomato work and half an hour lying unwashed on the board are no problem. The stonewash finish covers the rest. The black G10 scales don’t take on water and stay grippy when your fingers are greasy. They’re screwed on, so you can take them off for a proper clean – after two weeks of camping, that’s a real argument. It comes with a Kydex sheath instead of the usual Italian leather. Leather and damp blades don’t stay friends for long. Kydex goes under the tap, gets a shake, done. For the camping table, the van and every kitchen where you’re only a guest.

A new point on a familiar face You know the GMF1: small, skeletonised, so flat that you eventually forget it’s on your belt at all. The Texas keeps exactly that handle and swaps the blade shape up front. In place of the familiar drop point line, you get a clip point blade. The swedged tip runs finer, and you notice it on anything that asks for precision – lifting the edge of packing tape, picking apart a seam, working a knot out of a line. With 4 mm of stock, there’s still enough material behind it that the tip isn’t something you need to worry about. The blade measures 5.6 cm, the whole knife 13.7 cm at 57 g. The handle comes in at 8.1 cm and carries three jimping zones for secure thumb pressure. The steel is new as well: cryo-treated Hybrid Cryo, paired with a stonewash finish that lets signs of use quietly slide. It ships in a brown leather sheath that takes on a beautiful patina over the years. At 5.6 cm the blade sits well below the 12 cm mark, so under German law (§ 42a WaffG) you may generally carry the GMF1-Texas. Meant as orientation, not as legal advice.

Bella Italia Meets American Spirit Imagine this: American ingenuity meets Italian passion – and instead of a deep-dish pizza, you get the Spyderco Metropolitan. Designed in Colorado and crafted in Italy, this slipjoint is as smooth as an espresso in Rome and as reliable as a burger in Denver. The Metropolitan is essentially the little brother of the legendary UK Penknife – or rather, the cousin who feels at home on both sides of the Atlantic. With an overall length of 16 cm, it sits perfectly between the UKPK and the Urban. For those familiar with the old SpyDK (now discontinued), the handle will feel familiar – just with an updated high-performance blade. The blade is Böhler M390 – a high-end powdered steel so edge-retentive your cardboard boxes will already be nervous. Add the feather-light 54 g FRN handle, which is barely noticeable in your pocket, and the reversible wire clip for carry convenience – left or right side. And, of course, the iconic Round Hole: slip in a finger, a gentle push, and the blade is deployed. In short, the Metropolitan Lightweight is Spyderco’s answer to whether a modern slipjoint can be practical, §42a-compliant, and stylish at the same time. The answer? Si!

Legal, corrosion-resistant and eye-catching – the UKPK Salt in MagnaCut Question: what is bright yellow, extremely corrosion-resistant and a pretty sharp affair? Bingo! The UKPK Salt (C94PYL) with a blade made from CPM MagnaCut – Spyderco's first non-locking knife in the legendary Salt Series. Fully legal to carry – in the UK, Germany, Austria and Switzerland It's no secret that knife laws in Europe are significantly stricter than in the USA. As one of the first major manufacturers to address this, Spyderco created the UKPK (UK Penknife) – a true European classic that even meets the very strict knife laws in Great Britain. Two factors make the UKPK so special: while the blade opens one-handed via the Spyderhole, it does not lock in the open position. Instead, a strong backspring (slipjoint) holds the blade – the same principle as a classic Swiss Army knife. This makes the UKPK §42a-compliant in Germany and fully legal to carry in the UK under the Criminal Justice Act 1988. Why MagnaCut? Our steel recommendation from the Knife Lounge As an owner-run knife shop in Hamburg, we've handled the UKPK in every steel variant available. MagnaCut, developed by metallurgist Larrin Thomas, combines precisely calibrated amounts of chromium, vanadium and niobium – the result is a steel that is significantly more corrosion-resistant and better at holding an edge than most other stainless steels. In everyday carry terms: it stays sharp, even in wet or salty conditions. Steel Edge retention Corrosion resistance Sharpenability CPM MagnaCut ★★★★★ ★★★★★ ★★★★☆ CPM SPY27 ★★★★☆ ★★★★☆ ★★★★★ CTS BD1 ★★★☆☆ ★★★★☆ ★★★★★ LC200-N ★★★☆☆ ★★★★★ ★★★★★ Small but mighty – highly functional EDC without a lock At just 48 grams and with a 74mm blade, the UKPK barely registers in your pocket. The thin blade with its full flat grind is a genuine slicer in everyday use – Spyderco didn't build a gadget here, but a serious cutting tool. The characteristic slipjoint click at full open and half-close gives you clear feedback on the blade's position at all times. The choil at the base of the blade gives your index finger additional control. The bright yellow FRN handles (Fiberglass Reinforced Nylon) are built without steel liners – lightweight yet stable. The yellow colour also has a practical advantage: the knife won't disappear at the bottom of a bag or backpack. The deep-carry wire clip is reversible and mountable on either side, making the UKPK fully suitable for left-handed users. Frequently asked questions about the Spyderco UK Penknife C94PYL Is the UKPK C94PYL legal to carry in the UK? Yes, fully. Under the Criminal Justice Act 1988, a non-locking folding knife with a blade under 3 inches (76mm) is legal to carry in the UK. The UKPK has a 74mm blade and no locking mechanism – it was specifically designed to meet these requirements. Is the UKPK legal to carry in Germany? Yes, fully. Because the blade is held open by a backspring rather than a lock, the UKPK is §42a-compliant under German weapons law. It is one of the very few one-hand-opening knives that meets this requirement. What is the difference between MagnaCut and LC200-N? Both steels offer excellent corrosion resistance and are well suited to wet environments. MagnaCut provides significantly better edge retention and toughness, but requires a little more effort to sharpen. Choose MagnaCut for maximum cutting performance; choose LC200-N if you prefer quick touch-ups with a simple ceramic rod. What is the Salt Series? Spyderco's Salt Series is their line of maximum corrosion-resistance knives, originally developed for marine, diving and coastal use. The C94PYL is the first non-locking knife in the Salt Series. Is the UKPK suitable for left-handed users? Yes. The wire clip is reversible and can be mounted on either side. The Spyderhole works equally well with the left thumb. How do I sharpen a MagnaCut blade? MagnaCut runs at approximately 61–63 HRC. A basic honing steel won't be sufficient – we recommend a whetstone (400–1000 grit) or a quality ceramic rod with some patience. For day-to-day maintenance, stropping on leather will keep the edge going significantly longer between full sharpenings. Where does the name "UK Penknife" come from? The UKPK was originally developed for the British market, where one-hand-opening locking knives are prohibited in public. Spyderco created a fully legal everyday carry knife that still offers all modern EDC features – and it quickly became a favourite across Europe too.

Jens Anso - Monte Carlo Zirconium Zirconium handle scales Blade made of RWL 34 Handrubbed Including certificate  Cool GentlemanThere is hardly any other place in the world where elegance, glamour, high-tech as well as old and new come together in such a spectacular way as in Monte Carlo on the coast of the city-state of Monaco. The legendary Formula 1 race in the time-honored streets of the principality is considered to be one of the most difficult of all and always ensures high excitement in motor sports. But even if you are not a motorsport fan, you will like this little EDC companion. The choice of name for this great Ansø knife could hardly be more appropriate. The incredibly clear line and the choice of materials that go hand in hand with it, make the Monte Carlo appear both discreet and noble and sporty and relaxed. The handle is an open construction with handle scales made of brushed zirconium, which is connected on the back by a colored anodized titanium backspacer (gray on this version). The open construction allows you to clean the knife very easily after use, for example if there is dirt on the inside. For the blade, the veteran and excellent RWL-34 steel was used, which has proven itself over the years as an excellent blade steel. This alloy, invented by Damasteel in Sweden, is produced using a powder metallurgy process and is basically an update to the American and popular 154CM steel. By the way, the abbreviation RWL stands for Robert Waldorf Loveless, one of the most important knifemakers of all time, who loved to use this steel for his blades. RWL-34 has a high edge retention and a very good corrosion resistance so that you can work with food completely harmless. The real highlight of the Monte Carlo, however, besides the great looks, is the closure technology. Strictly speaking, you don't have a real lock here, but a so-called friction folder. This means that the blade is only held by two detent balls to the right and left of the blade root, which gives you a very smooth blade action and an incredibly defined engagement of the blade. But what does V2 actually mean?Jens Anso has once again thought about how he can improve the Monte Carlo. The result is new titanium screws, a uniform width of the handle scales, and even better and more precise machining processes.  Colors:Antracite Zirconium The zirconium handle scales offer an exciting surface that also feels great thanks to the brushed finish. The backspacer as well as the clip are made of gray titanium.

Cool GentlemanThere is hardly any other place in the world where elegance, glamour, high-tech as well as old and new come together in such a spectacular way as in Monte Carlo on the coast of the city-state of Monaco. The legendary Formula 1 race in the time-honored streets of the principality is considered to be one of the most difficult of all and always ensures high excitement in motor sports. But even if you are not a motorsport fan, you will like this little EDC companion. The choice of name for this great Ansø knife could hardly be more appropriate. The incredibly clear line and the choice of materials that go hand in hand with it, make the Monte Carlo appear both discreet and noble and sporty and relaxed. The handle is an open titanium construction, which is connected on the back by a colored anodized titanium backspacer. The open design makes it very easy to clean the knife after use, for example if dirt is on the inside. For the blade, the veteran and excellent RWL-34 steel was used, which has proven to be an excellent blade steel over the years. This alloy, invented by Damasteel in Sweden, is produced using a powder metallurgy process and is basically an update to the American and popular 154CM steel. By the way, the abbreviation RWL stands for Robert Waldorf Loveless, one of the most important knifemakers of all time, who loved to use this steel for his blades. RWL-34 has a high edge retention and a very good corrosion resistance so that you can work with food completely harmless. The real highlight of the Monte Carlo, however, besides the great looks, is the closure technology. Strictly speaking, you don't have a real lock here, but a so-called friction folder. This means that the blade is only held by two detent balls to the right and left of the blade root, which gives you a very smooth blade action and an incredibly defined engagement of the blade. But what does V2 actually mean?Jens Anso has once again thought about how he can improve the Monte Carlo. The result is new titanium screws, a uniform width of the handle scales, and even better and more precise machining processes.