EDC Knives at the Knife Lounge

Alvin Lee Design Titanium handle Green Zirconium, aged Copper, Blue Crystalized or Black DLC Titanium InlayMagnacut blade with stonewashed, frosted satin, acid washed, or black DLC finish

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

Chris Reeve Sebenza 31 Bog Oak available in Large or Small Wood inlay on the front and back Clip sits slightly diagonal on the 31 Of course, in addition to the "Plane Jane", the Sebenza 31 is again available in a model with inlays.  While the rear Wood inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Wood inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and ScrewChris Reeve BackspacerChris Reeve Body Screw KitChris Reeve Pocket ClipChris Reeve GreaseChris Reeve Body ScrewChris Reeve Lanyard classic for Sabenza and UmnumzaanLanyard Pin

The Tactile Knife Ranger combines traditional slipjoint craftsmanship with high-end, American-made production. Jared Oeser Design  Titanium handle with shield inlay made of Micarta  Slipjoint pocket knife with a Wharncliffe blade made of Magnacut Made in USA

The Tactile Knife Ranger combines traditional slipjoint craftsmanship with high-end, American-made production. Jared Oeser Design  Titanium handle with shield inlay made of copper TechnoCarbo Slipjoint pocket knife with a Wharncliffe blade made of Magnacut Made in USA

The Tactile Knife Ranger combines traditional slipjoint craftsmanship with high-end, American-made production. Jared Oeser Design Titanium handle Bowie blade made from Magnacut Made in USATactile Knife goes old school  The Ranger is Tactile Knife's modern interpretation of a classic slipjoint knife - elegant, functional and with a lot of history. Inspired by traditional designs but with an innovative twist, it combines timeless simplicity with modern materials and manufacturing techniques.  Created in collaboration with Jared Oeser, the Ranger pays tribute to the Texan roots of Tactile Knife. Particularly striking: the unusual “Bowie” blade, which combines a striking look with high functionality. The sophisticated design is complemented by an unconventionally shaped bolster that gives the knife a modern touch. Incidentally, the name “Ranger” comes from an Army Ranger - a good friend of Jared's who saw the first prototype.  Are you looking for a knife with character that perfectly combines tradition and modernity? The Tactile Knife Ranger brings a classic slipjoint feel with high-precision workmanship and a unique design to your pocket - a stylish companion for real knife fans. In addition to the titanium and blackwash versions, there is also the Black Ranger. Here you get an evil all black version with a cool FatCarbon inlay.

SlipJoint pocket knife Silver handle Sheepfoot blade from M390

CPM S30V blade steel with DLC coating Hollow ground Pink G10 scales Compression lock Four-way reversible clip

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

(Not) Playing Second Fiddle – Now Featuring the Long-Awaited Hollow Grind Rick Hinderer has always believed that a tool should work for you, not against you. During his years as a firefighter, Hinderer learned what truly matters when using tools in extremely high-stress situations. His bestseller, the XM-18, follows that principle: fantastic ergonomics, reliable function, intuitive operation. The Eklipse 3.5” is essentially the sister model of the XM-18 – but it definitely doesn’t live in its shadow. First released in 2014, the Eklipse has built a loyal fan base over the years. Many Hinderer enthusiasts even consider it the hidden star of the entire lineup. No surprise then that its design became the foundation for the legendary Zero Tolerance 0392. HOLLOW GRIND! What makes the new generation of the Eklipse so special is the SLICER blade with a genuine Hollow Grind – a feature fans have been asking for loudly and persistently for years. Hinderer has finally delivered. The hollow grind uses an unusually large radius, which allows the edge to cut extremely well while remaining significantly stronger than traditional hollow grinds. It’s the best of both worlds: cutting performance and durability. The blade is made from CPM S45VN – the successor to the legendary S35VN – and is ground thinner and more refined than in previous generations. The massive thumb studs act as blade stops when open and show just how solidly the Eklipse is built. Naturally, this version also runs on the classic Hinderer Tri-Way Pivot System, allowing you to switch freely between ball bearings, nylon washers, or bronze washers. A shape built to work – not just to look good The more linear handle shape clearly sets the Eklipse apart from the XM-18. Two pronounced grip recesses provide phenomenal ergonomics and a rock-solid feel in hand. The show side features a textured G10 scale, available in several colors – including Black G10, Blue-Black G10, and OD Green G10. The integrated thumb ramp gives you additional control, whether you're doing fine work or applying serious pressure. Note for modders: The Eklipse uses its own hardware system. Screws, standoffs, and spacers are not interchangeable with the XM-18. Only the clip, filler tab, and pivot screw are compatible. Available configurations: SLICER – S45VN – Hollow Grind (Tri-Way Pivot) Finish options: Stonewash Black G10 Blue-Black G10 OD Green G10 Working Finish Black G10 Blue-Black G10 Stonewash offers a tough, scratch-resistant working finish. Working Finish is slightly finer, has a more “used” appearance, and is equally durable.

Hunting and outdoor pocket knife Micarta handleELMAX blade with Stonewashed, Satin oder PVD finishThe GiantMouse Jagt is a folding knife that could soon become your indispensable companion. "Jagt" is the Danish word for "hunt", and that's exactly what this knife was designed for, but that's not all. The blade made of ELMAX Super steel is not only incredibly sharp and durable, but also extremely versatile with its drop point shape. The flipper and thumb hole make it effortless and smooth to open, aided by a smooth ball bearing action. The ergonomically shaped handle made of Micarta, which lies securely in the hand, is particularly noteworthy. This is also contributed by the reliable liner lock, which prevents unintentional closing of the blade. A special feature is the convertible wire clip, which allows a deep and discreet carrying of the knife. Although the Jagt was originally designed as a hunting knife, it is great for a variety of outdoor activities, be it hiking, camping or even as an EDC(Every Day Carry). It's so versatile and practical, you'll want to have it with you wherever you go. There are three different versions to choose from, so you can find the exact knife that best suits your daily adventures and needs. 

Hunting and outdoor pocket knife Micarta handleELMAX blade with Stonewashed, Satin oder PVD finishThe GiantMouse Jagt is a folding knife that could soon become your indispensable companion. "Jagt" is the Danish word for "hunt", and that's exactly what this knife was designed for, but that's not all. The blade made of ELMAX Super steel is not only incredibly sharp and durable, but also extremely versatile with its drop point shape. The flipper and thumb hole make it effortless and smooth to open, aided by a smooth ball bearing action. The ergonomically shaped handle made of Micarta, which lies securely in the hand, is particularly noteworthy. This is also contributed by the reliable liner lock, which prevents unintentional closing of the blade. A special feature is the convertible wire clip, which allows a deep and discreet carrying of the knife. Although the Jagt was originally designed as a hunting knife, it is great for a variety of outdoor activities, be it hiking, camping or even as an EDC(Every Day Carry). It's so versatile and practical, you'll want to have it with you wherever you go. There are three different versions to choose from, so you can find the exact knife that best suits your daily adventures and needs. 

Hunting and outdoor pocket knife Micarta handleELMAX blade with Stonewashed, Satin oder PVD finishThe GiantMouse Jagt is a folding knife that could soon become your indispensable companion. "Jagt" is the Danish word for "hunt", and that's exactly what this knife was designed for, but that's not all. The blade made of ELMAX Super steel is not only incredibly sharp and durable, but also extremely versatile with its drop point shape. The flipper and thumb hole make it effortless and smooth to open, aided by a smooth ball bearing action. The ergonomically shaped handle made of Micarta, which lies securely in the hand, is particularly noteworthy. This is also contributed by the reliable liner lock, which prevents unintentional closing of the blade. A special feature is the convertible wire clip, which allows a deep and discreet carrying of the knife. Although the Jagt was originally designed as a hunting knife, it is great for a variety of outdoor activities, be it hiking, camping or even as an EDC(Every Day Carry). It's so versatile and practical, you'll want to have it with you wherever you go. There are three different versions to choose from, so you can find the exact knife that best suits your daily adventures and needs. 

Hunting and outdoor pocket knife Micarta handleMagnacut blade with Satin finishThe GiantMouse Jagt is a folding knife that could soon become your indispensable companion. "Jagt" is the Danish word for "hunt", and that's exactly what this knife was designed for, but that's not all. The blade made of Magnacut Super steel is not only incredibly sharp and durable, but also extremely versatile with its drop point shape. The flipper and thumb hole make it effortless and smooth to open, aided by a smooth ball bearing action. The ergonomically shaped handle made of Micarta, which lies securely in the hand, is particularly noteworthy. This is also contributed by the reliable liner lock, which prevents unintentional closing of the blade. A special feature is the convertible wire clip, which allows a deep and discreet carrying of the knife. Although the Jagt was originally designed as a hunting knife, it is great for a variety of outdoor activities, be it hiking, camping or even as an EDC(Every Day Carry). It's so versatile and practical, you'll want to have it with you wherever you go.

Hunting and outdoor pocket knife Orange G10 handleMagnacut blade with Stonewashed finishThe GiantMouse Jagt is a folding knife that could soon become your indispensable companion. "Jagt" is the Danish word for "hunt", and that's exactly what this knife was designed for, but that's not all. The blade made of Magnacut Super steel is not only incredibly sharp and durable, but also extremely versatile with its drop point shape. The flipper and thumb hole make it effortless and smooth to open, aided by a smooth ball bearing action. The ergonomically shaped handle made of G10, which lies securely in the hand, is particularly noteworthy. This is also contributed by the reliable liner lock, which prevents unintentional closing of the blade. A special feature is the convertible wire clip, which allows a deep and discreet carrying of the knife. Although the Jagt was originally designed as a hunting knife, it is great for a variety of outdoor activities, be it hiking, camping or even as an EDC(Every Day Carry). It's so versatile and practical, you'll want to have it with you wherever you go.

In collaboration with Audacious Concept Titanium handle (with Micarta inlay) Magnacut blade Includes glow-in-the-dark pivot inlay

In collaboration with Audacious Concept Titanium handle (with Micarta inlay) Magnacut blade Includes glow-in-the-dark pivot inlay

Trey Sprinkle AKA American Outlaw Design G10 handle Nessmuk blade made of 14C28N with (black)stonewashed or satin finish

Trey Sprinkle AKA American Outlaw Design G10 handle Nessmuk blade made of 14C28N with (black)stonewashed or satin finish

Trey Sprinkle AKA American Outlaw Design G10 handle Nessmuk blade made of 14C28N with (black)stonewashed or satin finish