Combat Beads Scout F3.5 Large version of the Combat Bead Folder with an overall length of 21.6 cmBlade made of MagnaCut steelwith concealed lanyard holeWith an overall length of 21.6 cm, the Combat Beads Scout F3.5 is a pocket knife specially designed for large hands. The blade is opened effortlessly either via the front flipper or the precisely milled pockets on both sides of the blade and thanks to the ball bearings, the blade runs as smooth as butter.
The Combat Beads Scout F3.5 also has a concealed lanyard tab.
Designed by Keith Griffin and manufactured by Bestech Knives.
Combat Beads Scout F3. 5 BrassLarge version of the Combat Bead Folder with a total length of 21.6 cmWith interchangeable inlay on the front and back made of BrassBlade made of MagnaCut steelWith concealed lanyard holeWith a total length of 21.6 cm, the Combat Beads Scout F3. 5 is a pocket knife specially designed for large hands. The blade is opened effortlessly either via the front flipper or the precisely milled pockets on both sides of the blade and thanks to the ball bearings, the blade runs as smooth as butter.
The Combat Beads Scout F3.5 also has a concealed lanyard tab.
Designed by Keith Griffin and manufactured by Bestech Knives.
ANV M311 Comp Topo KnifeLounge ExclusiveThe compact version of the tactical fixed ANV M311Topo Edition - KnifeLounge Exclusive!Green Micarta handleElmax steel blade with DLC finishIncludes paracord and Kydex sheath
JRW Gear Traitor Jamie Williams Design Richlite handlesWharncliffe blade made of Magnacut with stonewash finish Kydes sheath with Beltloops includedMade by Tactile Knife in Texas, USA
There are simply knives that look so futuristic that they could have come straight from a movie set. If Cooper had worn the Traitor from JRW Gear as part of his equipment in Interstellar, it would certainly have looked authentic in the film. The Traitor looks a bit special at first glance. Few curves, but many clear angles, a very conspicuously shaped (cyber) sheepfoot blade and four lanyard holes - old school is different! However, when you take the Traitor in your hand, it immediately becomes clear how well thought out the design is. The handle nestles fantastically in the palm of the hand and the thumb automatically slips into the large hollow on the back of the blade milled from Magnacut steel. The bolted Richlite handle scales provide a great grip and thanks to the various lanyard holes, you have a variety of options for positioning a small safety strap. The compact size and the amazingly low weight, make the Traitor an absolutely EDC-fixed suitable for everyday use.
By the way, the knife is produced by the guys from Tactile Knife.
Null Knives Raikou Black / GoldSuccessor of the Null Knives Raiden model Titanium handle with Satin Finish Wharncliffe blade made of CPM S90V with Belt Satin Finish
NGMCo F KeyPrybar made of titanium in key shapeDelivery includes lanyard and certificateFinish: Blasted, StonewashedMade by Archie in Colorado USADimensions: Overall length: 6.35 cmWidest point: 2.29 cmPry tip: 1.14 cm wide (1.27 mm long)Material thickness: 0.64 cm
NGMCo F KeyPrybar made of titanium in key shapeDelivery includes lanyard and certificateFinish: Blasted, StonewashedMade by Archie in Colorado USADimensions: Overall length: 6.35 cmWidest point: 2.29 cmPry tip: 1.14 cm wide (1.27 mm long)Material thickness: 0.64 cm
NGMCo Side Piece FAFO Edition
Prybar and bottle opener made of titanium Made by Archie in Colorado USAFAFO was the first, somewhat unusual project name for what is now "The Side Piece". But in a moment of clear reflection, Archie decided to give it a different name.
So this is "The Side Piece" in its original form - a real PryBar for everyday use. It is the result of Archie's passion for CAD/CAM and machining, coupled with his many years of experience in using an EDC PryBar.
Each piece is lovingly crafted in Archie's workshop here in Colorado. And for the screws, we rely on our friends at Tactile Knives in Texas to make them to Archie's exact specifications.
You can read what FAFO actually stands for under the clip of the PryBar.
Dimensions:
Total length: 12.7 cm
Widest point: 1.52 cm
Material thickness: 0.64 cm
Weight: 38.2 grams
NGMCo Middleman Prybar made of titanium Hidden lanyard loop
milled circular pattern not only looks good but also makes the PryBar easier to grip
Made by Archie in Colorado USA
The Middleman was developed by Archie to combine as many functions as possible in a compact EDC Prybar.Dimensions:
Overall length: 10.8 cm
Widest point: 1.88 cm
Material thickness: 0.68 cm (0.86 cm with clip)
NGMCo The PJB
the PlaineJaneBar made of titanium
with clip, bottle opener and 1/4" wrench
designed and manufactured by Archie in his 1-man workshop in ColoradoDimensions:
Length: 12.7 cm
Thickness: 0.6 cm
Width (tapered from 1.3 cm to 1.5 cm)
NGMCo Mr. NiceBarTitanium Prybar and Bottle Opener Finish: Blasted, StonewashedMade by Archie in Colorado USAThe Mr. NiceBar is milled by Archie in his workshop from a solid titanium bar.
He determined thedimensionsbased on his experience and years of using Prybars.This is, in fact, the perfect "sweet spot", for a Prybar.
The story behind it:
Archie and his wife spent 10 days in Medellín, Colombia. The laws regarding carrying knives were unclear there and he had no desire to spend a few nights in a South American prison.
So this 12.7 cm EDC Prybar became his travel companion and since then his most used and most carried EDC item.
The Mr. NiceBar is a functional, minimalist, high-quality and useful tool. The recessed pocket acts as a frame for the tool, saving weight while providing more grip. The edges are hand ground so they are not too sharp, but not dull either.
Capsule lifter and pocket clip are intentionally on one side so that the opposite side has a clean, straight edge.
Also a nice detail is the triangular milled lanyard hole. Archie recommends combining the Prybar with a lanyard and bead.Dimensions:Overall length: 12.7 cmWidest point: 1.52 cmMaterial thickness: 0.64 cmWeight: 38.2 grams
Otter Anchor Knife Micarta Knife Lounge Exclusiveclassic anchor knife with green micarta handle scales
handle scales including brass anchor and bolster blasted
You have the choice between a non-stainless carbon steel blade (C75) or a stainless steel blade (1.4034 steel)The micarta, including bolsters, rivets and brass anchors, is then blasted, giving it a classy matte tone. You have the choice of a stainless carbon steel (C75) blade or a rust resistant blade. The iconic shape of the knife is suitable by the shape of the blade especially for pulling cuts and was therefore particularly popular in seafaring to cut ropes or lines. But also making a sandwich works great: for this you simply use the bulbous curved blade back - the next picnic is coming! The spring of the slip joint has a fixed tension and ensures that the knife does not accidentally fold while you are working. The anchor knife you recognize from afar by the large anchor on the handle scales: this is a hand-adjusted inlay of brass, which takes on a beautiful, dark patina over time.
Jack Wolf Knives Gunslinger JackCarbon fiber handle Hollow ground S90V bladewith matching color clip and additional clip insertThe Gunslinger Jack is the first front flipper from Jack Wolf Knives and features an innovative (bolster) frame lock. With just a smooth handle you can open the knife effortlessly and lock it securely.
A special highlight of the Gunslinger Jack is the color-coordinated clip, which gives your knife an individual look. However, you also have the option to wear the knife without the clip. Included is a color-matched clip insert that gives you an alternative carrying option.
The Gunslinger Jack is also distinguished by its high-quality S90V hollow ground steel. This steel is known for its excellent edge retention and durability. Whether you're doing precision cutting work or finding yourself in challenging situations, the Gunslinger Jack is always reliable at your side.
Jack Wolf Knives has created with the Gunslinger Jack a knife that is not only functional and reliable, but also convinces with its unique design. The combination of first-class workmanship, innovative locking and color-coordinated details makes this knife a real eye-catcher.
Vero Engineering Neuron Non Flipper Joseph Vero Design 2nd. Generation of the Neuronnon-locking, double detentno Frontflipper (UK legal)Titanium handle Sheepsfoot blade made from M390
Jack Wolf Knives Coin 002 - IG 20K Milestone Sean Tiffany Design Limited edition for the milestone of 20,000 Intragram followers made of zinc alloy with antique "copper" finishDiameter: 4.5cm Thickness: 4mm at the thinnest & 6mm at the thickest point Weight: 42g
Jack Wolf Knives Midnight Jack
S90V Steel
Highend Slipjoint Folder
Titanium bolster The scope of delivery and packaging:1. tube You get the knife in a tin. Each can carries a drawing adapted to the knife. For this, Ben has been able to win J. Gonzo. 2. microfiber cloth the color of the microfiber cloths change depending on the pattern of the knife. 3. sticker and platelets Also designing by J.Gonzo 4. leather case is also available. All Jack Wolf Knives are made in small runs. That means once it's sold out, it won't come back for a while.
Arcane Plexus Bronze in collaboration with Isham Bladeworks Titanium handle with black PVD finish and bronze accentsJapanese Tanto blade made of Magnacut with satin finish
