Titanium handle scales for your Daily Knives AK1 with cross cut patternKnife Lounge Exclusive100 % made in Hamburg, GermanyDelivery without knife (or blade) and screws.

Crowgear Don't Worry Stone - Inlay Inlay for your Don't Worry Stone Dimensions: 44 mm x 24 mm x 3 mm Titanium or brass Engraving Want an engraving on your Worry Stone? No problem! We're happy to engrave your personal message onto the brass Inlay. You can find our fonts here. This costs 25 €. Just reply to your order confirmation email and answer the following questions for us: Where should we engrave? Hidden on the inside of the Inlay, or clearly readable on the outside. What should we engrave? Your desired text. Which font would you like? Please note that engraved products are excluded from returns. Engraving takes about 3 to 5 business days. This is just one part of the Don't Worry Stone. Find all Body, Frame, Inlay, pre-assembled sets and special editions in one place. See all Don't Worry Stone options

Saddle up, partner – here comes the Jack Wolf Knives Scuffle! Created in collaboration with Nick Rodgers / Nitch Designs and inspired by the old Western Bowie knives, it brings a good dose of Wild West flair to your pocket. Powerful & sharp blade The blade made of S90V steel is slightly beefier to keep the tip stable even in tougher situations. Thanks to the hollow grind, it still cuts as sharp as Doc Holliday’s Colt. For the first time at Jack Wolf, there’s a flipper tab, combined with a fuller on both blade sides – it feels as smooth as reloading a revolver. Secure & stylish handle The large, solid handle sits securely in your hand, and with the new pivot collar, the lockbar insert with jimping, and the partially hidden hardware, the Scuffle is not only functional but also damn stylish. Individual style options And because everyone in the West had their own style, you can choose: Kirinite Black Ice with belt satin finish, Micarta with stonewash, Crystall titanium, or the uncompromising full titanium frame lock version. Your Bowie for today So: if you’ve always wanted your own “Bowie for today” – here it is. The Scuffle is ready to ride into the sunset with you. Of course, the Scuffle comes in a beautiful, elaborate packaging with a design by Sean Tiffany.

Pocket-Friendly The Sweeney is one of the most popular designs by Matt Westberg – and for good reason: it combines the best of three worlds. The handle takes inspiration from the Barber, the blade recalls the Tick, and the thumb hole comes from the Slim. But the Sweeney is much more than just a mash-up – its flowing lines look incredibly harmonious and feel like they were crafted from a single piece. With the Mini Sweeney, you get the same DNA in a more compact format. Same look, same character – just scaled down to fit even easier in your pocket. Despite its smaller size, it remains a real eye-catcher and a reliable everyday companion. The blade made from CPM Magnacut delivers modern high-end performance: extreme edge retention, corrosion resistance, and toughness. It runs on ceramic bearings that sit on hardened steel washers – ensuring a buttery smooth action and long-lasting durability. You can open it via the thumb hole or the discreet front flipper, which is intuitive and quick to use. No detail has been overlooked: a hardened lockbar insert with overtravel stop, titanium liners, precisely finished inlays, and a 3D-milled titanium pocket clip complete the package. Each knife is also individually numbered – with the number discreetly placed on the inside of the backspacer. With the Mini Sweeney, you get a limited high-end tool that carries the unmistakable Berg Blades signature: thoughtful, functional, elegant – now in the perfect pocket-friendly size. Available variants: Titanium Black PVD with Green Micarta Titanium Beadblast with Carbon Fibre Full Titanium in Stonewash Finish

There are knife makers. There are knife makers who are true artists. And then there’s Stefan Steigerwald. The “Mad Professor” of the knife world regularly invents folders that make everything else in the knife cosmos look like mere background props. His creations, shaped by retro-futurism and steampunk aesthetics, are fine mechanical masterpieces – complex, playful, and yet somehow perfectly usable for everyday carry. The Aronax Slipjoint, developed in collaboration with Bastards Knives, is more than just a namesake: Professor Pierre Aronnax was the main character in Jules Verne’s classic 20,000 Leagues Under the Sea – one of the most important steampunk novels ever written. And when you hold the Arronax in your hand, you can almost imagine grim Captain Nemo himself pulling it from his jacket pocket. You can choose between two fascinating variants: Brass handle scales with satin-finished D2 blade Titanium scales with stainless Magnacut blade (ideal for a damp engine room deep under the sea) The handle scales unmistakably bear Steigerwald’s signature: playful Art Deco elements combined with a clear, almost industrial design. The textured recesses provide a secure grip, while the milled holes in front of the pivot screw evoke an old steam engine – small details with great charm. The proprietary hardware blends seamlessly into the mechanical look – with a particularly clever touch: the pivot lock on the clip side, as if taken straight from a Nautilus construction kit. The clip itself is a small mechanical revolution. Thanks to an integrated spring underneath, you can press it down like a rocker – no snagging, no scratching, just a smooth slide into your pocket. Sounds simple, but it’s executed so elegantly you almost feel like applauding. The sheepsfoot blade opens with a satisfying walk & talk – a little mechanical ritual in its own right. The maritime influence of the sheepsfoot blade is no coincidence: the small ramp at the end of the spine gives your thumb a secure rest, while the subtle “horn” toward the tip provides a precise finger rest for detailed cutting work – whether on deck, underwater, or at your desk. The package includes a microfiber cloth and a sturdy pouch with patch panel.

Silver meets Steampunk The Bastard Knives Arronax Slipjoint has been silver-plated by hand in our Altonaer Silberwerkstatt. The result is not a sterile high gloss, but a vivid finish with intentionally darkened areas – an effect that highlights every contour and gives the knife an almost antique depth. This interplay of light and shadow lends the Arronax a nearly historical aura. Developed by Bastard Knives in collaboration with the “Mad Professor” Stefan Steigerwald, the Arronax is a homage to Jules Verne’s 20,000 Leagues Under the Sea. The Verne vibe runs through every detail: playful Art Deco elements meet clear, industrial-inspired lines – now emphasized even more by the silver plating. This Version Brass handle scales with a satin-finished D2 blade, silver-plated in Hamburg. The patina accentuates the milled holes and structured recesses, highlighting the retro-futuristic look. Surface Notes Patina intended: The darker areas are part of the design and deliberately created by hand. Care: Silver may naturally darken over time. If needed, gently refresh with a soft silver polishing cloth – avoid aggressive cleaners. Handmade character: Minor variations in tone and shading are normal and intentional.

Big Bang Midtech Dark & Light Edition With the Midtech Dark & Light Edition, Toni takes the Big Bang to a new level. In addition to its proven construction and unique design lines, all titanium hardware has been given a refined finish. The blades and handle scales feature an extremely fine bead-blasted surface, providing a clear, almost silky feel. Every step is meticulously handcrafted in Toni’s own workshop. Light Edition – Elegant Restraint The Light Edition features a bright, uniform stonewash that gives the titanium handle scales and the CPM-20CV blade an elegant subtlety – durable, resilient, and discreet at the same time. Dark Edition – Modern Contrast The Dark Edition comes with a deep black DLC coating combined with a finely polished finish. The result is a striking contrast between matte surfaces and silk-matte hardware, giving the knife a modern, almost tactical presence. Design & Function Whether Dark or Light, the Midtech version stays true to the Big Bang concept: a semi-integral design with flowing transitions, uncompromising cutting performance thanks to the hollow-ground CPM-20CV blade, and a construction that combines durability and maintenance friendliness. The iconic thumb studs allow for smooth opening, while the dual pins provide a precise stop when the blade is deployed. Nuances That Matter With the Dark & Light Edition, the Big Bang demonstrates how subtle nuances can make a difference: two knives, one concept – yet each a distinct expression of elegance and function.

Big Bang Midtech Dark & Light Edition With the Midtech Dark & Light Edition, Toni takes the Big Bang to a new level. In addition to its proven construction and unique design lines, all titanium hardware has been given a refined finish. The blades and handle scales feature an extremely fine bead-blasted surface, providing a clear, almost silky feel. Every step is meticulously handcrafted in Toni’s own workshop. Light Edition – Elegant Restraint The Light Edition features a bright, uniform stonewash that gives the titanium handle scales and the CPM-20CV blade an elegant subtlety – durable, resilient, and discreet at the same time. Dark Edition – Modern Contrast The Dark Edition comes with a deep black DLC coating combined with a finely polished finish. The result is a striking contrast between matte surfaces and silk-matte hardware, giving the knife a modern, almost tactical presence. Design & Function Whether Dark or Light, the Midtech version stays true to the Big Bang concept: a semi-integral design with flowing transitions, uncompromising cutting performance thanks to the hollow-ground CPM-20CV blade, and a construction that combines durability and maintenance friendliness. The iconic thumb studs allow for smooth opening, while the dual pins provide a precise stop when the blade is deployed. Nuances That Matter With the Dark & Light Edition, the Big Bang demonstrates how subtle nuances can make a difference: two knives, one concept – yet each a distinct expression of elegance and function.

Sweet Trend Meets EDC Knife In the past two years, if there was any trend you couldn’t ignore, it was this indulgently sweet calorie bomb. No, not the knife – the legendary Dubai Chocolate. With the Dubai Chocolate Edition of the Böker Plus Kihon, designer Lucas Burnley playfully captures this trend, bringing a perfect color mix of yellow, green, and brown into the design. It immediately evokes the namesake treat. Behind this playful look lies a serious everyday carry knife: a D2 ball-bearing blade for precise cuts, a lightweight and robust GFN handle, and a reliable Crossbar Lock. Practical, stylish, and a true eye-catcher – no sugar, but full-on enjoyment.

Tactile Knife Bexar – Knife Lounge Exclusive First things first, a quick language lesson: Bexar is pronounced “Bear” – just like the series The Bear or Bexar County near San Antonio, Texas. Now to the Bexar by Tactile Knife: a modern, urban slipjoint that slices so thin your cheese, apple, or package tape won’t know what hit them. Our Knife Lounge Exclusive Edition brings fresh green into play: Micarta handle scales that not only look great but also feel even better over time. The fine milled grooves provide excellent grip and a refined tactile experience. As a subtle yet striking detail, the grooves on the pivot screw run in a circular pattern, creating a stylish contrast. The blade is made from CPM Magnacut – one of the most exciting steels on the market today. Corrosion-resistant, edge-retaining, and built for everyday slicing performance, it handles daily tasks with ease. With an overall length of 17.1 cm and a slim 2 mm blade stock, the Bexar isn’t bulky – it’s a refined gentleman’s folder in an urban suit. As a slipjoint, the Bexar is fully 42a-compliant – making it perfectly legal and worry-free to carry in your pocket. A piece of clean design straight from Texas, USA, where Tactile Knife crafts its blades with passion and attention to detail.

S90V Power with Style When knife nerds design a blade they want to carry every single day – you end up with something like the Divo Knives Fireball. Created in collaboration with YouTuber Stassa23, this folder brings the perfect mix of cutting performance, style, and collector vibes. The hollow ground blade made from CPM S90V holds an edge exceptionally well and slices through cardboard, food prep, or rope with ease. It’s a steel that will serve you for a long time without constant sharpening. Add to that a smooth ball bearing action and titanium hardware – this is modern knife design at its finest. A real highlight: the wrap-around backspacer, which not only looks great but also defines the Fireball’s unique character. The US drop sold out in no time – we’re glad we could secure a small batch for Europe.

Small pocket-sized fixed bladeHandle material: ray skin under epoxy-coated cord windingMade predominantly by hand by founder Michael JarvaisIncludes Boltaron sheath with clip

Sometimes it’s the little things that make everyday life easier – and the TPT Slide by Big Idea Design is exactly that. A compact titanium tool that disappears in your pocket, but is always there when you need it: opening packages, tightening a screw, popping a bottle cap or doing a bit of prying. And because we believe that a multitool should also have character, we teamed up with Big Idea Design to create a Knife Lounge Exclusive version: a professionally applied Cerakote finish from the USA in deep green, paired with a mustard-yellow lanyard inspired by our logo – our signature touch for your pocket. What the TPT Slide can do (and it’s a lot): One-handed slide mechanism with replaceable blade Mini prybar for all kinds of small tasks Bottle opener Two screwdrivers (flat & wide) 6 mm hex opening for bits Ruler & measurement scale Scraper for adhesive residues Universal wrench (15 sizes) Keyring/lanyard hole All made from Grade 5 titanium: lightweight, strong, and built to last a lifetime. Why you’ll love it The TPT Slide isn’t a bulky multitool – it’s a smart everyday companion that you hardly notice until you need it. And when that moment comes, it saves the day. In this Knife Lounge Edition, it also carries a piece of our community DNA: tough, practical, and just a little nerdy – just like us.

Collusion – Jack Wolf Knives X Jakeb Ginsberg Remember those Saturday mornings of your childhood? Cereal, pajamas, and hours spent watching cartoons or comics on slightly scratched VHS tapes. Back then, the world was simple: good vs. evil, colorful action, quirky sidekicks – and endless imagination. That same nostalgic vibe hits you the moment you pick up the Collusion. Even the packaging is a clear homage to that era: retro VHS style, featuring “Jack Wolf” and “Jakeb the Fox” in a perfect good-cop/bad-cop setup. Think Batman and Robin – just with more steel and fewer capes. The knife itself is not the tiniest fixed blade by Jack Wolf Knives standards, but at 16.5 cm, it remains perfectly suitable for everyday carry and practical use. Designed by Jakeb Ginsberg and executed with JWK’s signature nerdy attention to detail. Technical Superpowers: Sheepsfoot/Reverse Tanto blade with hollow grind – as clean as a lightsaber cut High-performance S90V steel – incredibly hard and long-lasting sharpness Beautifully proportioned swedge Modern style with timeless design Variants: Blue Linen Micarta / Belt Satin Finish Full TI Stripe Pattern / Hand Satin Finish Purple Wave Kirinite / Belt Satin DLC Finish Red Abalone / Belt Satin Finish

Winner of the “Imported Folding Knife of the Year” award at the 2025 Blade Show AtlantaJoseph Vero Design Handle made of G10 Drop point blade made of S45VN steel with blackwash finish

100 % Made in USA Linerlock folder with a CPM-20V steel blade Titanium handle scales  Lightweight. Precise. And yes: a bit of a showpiece. Three Rivers Manufacturing – or TRM – has been building knives in Massachusetts for over 20 years. Not in massive numbers, but with real experience, attention to detail, and a whole lot of hand work. The Neutron 2 is one of their most sought-after models: A slim, ultra-precise folder that’s built for everyday use – but looks so good, you’ll want to show it off. The Specs: Blade: CPM-20CV – thin ground, razor sharp, stainless, and holds an edge like a champ Handle: Titanium with a clean, refined finish – durable and classy Opening: Dual thumb slots – smooth action on phosphor bronze washers Lock: Secure and accessible linerlock Clip: Discreet deep-carry clip Weight (Titanium version): Around 87 grams (3.1 oz) – featherlight without feeling flimsy Made in the USA – crafted in small batches, hand-assembled and individually inspected Who is the Neutron 2 for? For those who care about craftsmanship, clean design, and daily performance. It’s not officially limited – but it’s still hard to come by. Because TRM doesn’t just make knives. They build them. Properly.

“Black Micarta & Steel Bolsters” Some knives are just tools. Others tell stories. This one tells the story of salty sea air, calloused hands, and a family-run company in Solingen that’s been crafting knives since 1840 – long before anyone ever called it “EDC.” The anchor knife is a true classic. Originally designed as a sailor’s knife, it once belonged on every ship right alongside the logbook and a bottle of rum. Tough, dependable, and ready to cut through any rope – no matter the wind force. And now, this traditional knife is entering its next chapter. Outfitted with elegant anthracite Micarta scales and bead-blasted steel bolsters, this old salt becomes a stylish companion for everyday use. The subtle contrast between the dark Micarta and the satin-gray steel brings a touch of modern clarity to the knife’s maritime soul. Its characteristic sheepfoot blade – available in either stainless 1.4034 or classic C75 carbon steel – is perfect for controlled slicing and shines with its clean, functional design. The slipjoint mechanism offers reliable handling without a lock, making it fully §42a-compliant in Germany. And of course, it’s still made in Solingen – by Otter Messer, where real craftsmanship lives on. This knife doesn’t shout. It quietly nods to the past – reimagined for the present. It feels great in the hand, slips easily into your pocket, and only gets better with time. The Knife Lounge Exclusive Anchor Knife “Black Micarta & Steel Bolsters” isn’t mass-produced. It’s made in small, carefully crafted batches – with the love and attention to detail you’d expect from Otter.

A little different – and all the better for it. What do Danish designers Jesper Voxnaes and Jens Ansø do when they’re looking for inspiration for a new knife? We can’t say for sure – but judging by the name of their latest design, the Sonoma V2, it’s safe to assume that a certain scenic stretch of Northern California played a part. Sonoma County – a land of rugged coastlines, rolling hills, and endless vineyards. The kind of place where you can clear your head, breathe deep, and maybe start sketching the perfect EDC knife.  With the ACE Sonoma V2, Voxnaes and Ansø have taken one of their most beloved designs and refined it – a few smart tweaks here, a bit more everyday usability there. The result? A knife that keeps the soul of the original but feels lighter, sleeker, and just a bit more… clever.  Manufactured by none other than Reate, one of the most precise knife makers on the planet, the Sonoma V2 is crafted with the kind of quality that makes knife enthusiasts nod knowingly. Reate doesn’t just make knives – they make future legends. This version features PVD-coated titanium handle scales, giving it a sleek, rugged look that’s as tough as it is classy. Inside, a solid steel linerlock ensures long-term reliability – especially where it matters most: at the lockbar. The PVD-coated Elmax blade rides on silky-smooth ball bearings and features a finely curved belly with a precise tip. The crowned spine adds a touch of elegance, while the milled detent ramp ensures a satisfying, frictionless close. And yes, the discreet little flipper tab is all it takes to fire the blade into action – with just enough snap to make you smile every single time. The familiar wire clip keeps the knife riding low and discreet in your pocket – because good design doesn’t need to show off. And at this weight? You’ll forget it’s there… until you need it.  Bottom line: The Sonoma V2 is the laid-back Californian version of a high-end EDC – stylish, smart, and infused with just the right amount of Danish design wit. If you’re looking for a lightweight, reliable, and ridiculously good-looking knife, this one’s calling your name. Preferably while you’re sipping a glass of wine.

Arcane The CreatureTitanium FrameLock with a CPM-20CV steel bladeThumb pins on both sides of the blade American Tanot or Dropppoint bladeThe "Arcane The Creature", is not only a tool, but also a work of art. Israel Baccus, the creative mind behind the design, took inspiration from one of his favorite horror movies, "The Creature from the Black Lagoon". You can tell by the blade laser engraving on the blade: the "Creature" head from the movie that was released back in 1954. The result? A unique knife that should not be missing in your collection! Let yourself be inspired by the choice: Tanto or Droppoint blade, paired with a smooth Satin finish or a tough Stonewash finish. Handling is a breeze! Thanks to the ball bearings, the blade glides on smoothly and quickly. You can open it with either the flippertap or thumb pins on either side. With a length of almost 21 cm, the knife also feels comfortable in large hands. It combines futuristic design with the highest quality - made by the experts at Reate Knives. .

The Raven EDC Case – Your Rolling Bank Vault for the 3 Musketeers of Your Everyday Carry They say the foundation of every great EDC is: Write, Light, Slice. That’s something the Raven creator believes so much, he even got it tattooed (“It’s not a phase, mom!”). Now, he’s taking it a step further with the ultimate protection for your essential gear. The Raven EDC Case isn’t just any pouch — it’s a rugged fortress for your essentials, crafted in collaboration with the pros at Guard Dog Inserts Canada and built on the legendary Nanuk Nano 330, also proudly Made in Canada. What makes it special? Bank-vault tough: Shock-absorbent, water-resistant, and dustproof. The tough polycarbonate shell guards what matters most, even in the harshest conditions. Smart interior: A custom insert holds your three EDC musketeers tight — one folding knife, one AAA flashlight, and a mid to large-sized pen. PowerClaw latch: More secure than your deepest secrets — this latch keeps the case locked tight even through heavy drops. Compact & versatile: Perfect for everyday use, your backpack, or your workspace — keeping your gear safe and ready to go. Dimensions: 28.2 cm x 19.4 cm x 10.7 cm (L x W x H) — plenty of room for your key EDC tools without bulk. Knife: 12.70 cm x 3.81 cm x 1.84 cm Flashlight: 10.54 cm x 1.52 cm x 1.84 cm Pen: 13.52 cm x 1.21 cm x 1.14 cm Please note: The case is sold without knife, pen, or flashlight. Whether your EDC is minimalist or fully loaded, the Raven Case is the reliable sidekick that treats your gear like family. Ready to protect what matters most?  Heads-up for our friends in the US and Canada: You can grab this case directly from GuardDog.

A slipjoint done right. The Slippy Kraken combines smart design, everyday legality, and real cutting performance. Minimalist, modern, and ready for your pocket. Piratech Slippy Kraken – The Slipjoint, Reimagined The Slippy Kraken isn’t a throwback to old-school knives – it’s a bold redesign. Piratech has taken the slipjoint concept, broken it down, and rebuilt it with modern tech and clever engineering. The result is a knife that’s legal to carry in most parts of Germany – and still plays in the top league when it comes to materials and function. This isn’t the knife you carry just because you have to. This is the one you want to carry. Tool-free inlay swapping with MagSnap Thanks to a magnetic mechanism, the inlays stay rock-solid during use but can be changed in seconds – no tools, no hassle. Ideal if you like switching things up from time to time. Recurved backspring meets ergonomic design The spring is reverse-tensioned – sounds weird, feels great. This construction allows for a naturally curved handle without sacrificing mechanical stability. It fits your hand like it was made just for you. 118-degree mid-stop – smarter than the standard Most slipjoints stop at 90 degrees. Sounds fine, but in practice it puts your fingers at risk. The Slippy Kraken uses a 118° stop, meaning the blade is further away from your fingers if it ever starts to close unintentionally. Small detail, big safety bonus – especially when applying thumb pressure or during closing. Spring tension adjustment – your knife, your feel Crisp and snappy or smooth and easy? You decide. The backspring tension is fully adjustable, giving you total control over the action. Compact spring, more usable blade Because of the smart internal design, more space is available for the blade. You’re getting full performance in a slipjoint-friendly format – no compromises necessary. The Slippy Kraken isn’t a backup solution. It’s proof that a slipjoint can be modern, capable, and completely ready for daily carry – with no trade-offs in design, feel, or function.

Built for flashlights with a bit more body – and everything else you carry. The Huckleberry by Black Circus Leatherworks is a handcrafted EDC organizer made from waxed, vegetable-tanned Baldalassi leather – grippy in the hand, rich in character, and full of personality. The real highlight: The slightly expanded flashlight slot is designed to accommodate chunkier models like the Olight Baton – though slimmer flashlights fit just as well. It also features slots for your folder and prybar, plus a small extra pocket on the back that’s perfect for a compact pen. No clip, no bulk – the Huckleberry is built as slim as possible to slide straight into your pocket. Right where your EDC belongs. As always with Black Circus: fully hand-stitched, crafted with care. Delivery without contents.

The red lightning bolt for your gear. This patch features the iconic Black Circus Leatherworks logo – complete with the bold red lightning bolt on a black background. Equipped with a Velcro backing, it's ready to attach to your bags, patch panels, or wherever you like to show your support. At 8 × 4 cm, it’s a compact piece of Chris’s creative energy – made for those who love craftsmanship and live the EDC lifestyle.

The coolest bolt ever stuck to Velcro. With the Blitzeis patch, Black Circus Leatherworks adds a fun twist to your patch game. The design? A playful mash-up of the iconic red lightning bolt and a popsicle – bright, cheeky, and bound to stand out. Sized at approx. 7 × 1.8 cm and backed with Velcro, it sticks to any loop panel – whether it’s your bag, cap, or patch wall. Perfect for collectors, fans, and anyone who loves their EDC with a splash of color and humor.