Mushroom knife Opinel
This knife was designed by Opinel specifically for gathering and preparing mushrooms. Mushrooms can be easily skinned with the fine, curved Sandvik stainless steel blade with serrated spine. At the end of the handle made of natural-colored, lacquered beech wood is a brush made of boar bristles, with the help of which you can easily brush off soil residues from the mushrooms.
Kai Shun Chef's Knife White Ham Knife 9''
32 layers of Damascus steel with a VG Max steel core with a hardness of 61 HRC
Handle material: ash colored pakka wood
Wood treated with high quality resins and moisture resistant
Kai Shun knives combine centuries-old Japanese Samurai forging skills with modern and technically advanced manufacturing processes.
Böker Plus Gulo Pro Marble CF
Böker Plus Gulo Pro as especially noble version
detachable thumb pin
Steve Kelly design
brass colored ring around the blade axle screw
with lanyard loop
detachable clip
Type 301 P8 boning knife
The boning knife from Chroma type 301 (Design by F.A. Porsche) has a blade length of 14 cm and is well suited for removing bones.
Atelier Perceval - Le Francais Wacapou
The classic from France
made by hand
Extremely thin ground
The Le Francais is already something of a modern classic of the French knife culture and is, along with the L08, one of Perceval's most popular models.
Due to the thin, extremely cutting blade and the very universal handle, it is suitable for a whole range of cutting tasks that occur in everyday life. At the same time, the knife does not attract attention in any way and even makes a really good picture in a restaurant. Thanks to the small leather case it can be carried comfortably in your pocket without scratching the beautiful handle.
Although we are dealing with a quite modern knife design, the roots of Le Francais go back to the 17th century. Already in this long past time, French farm workers used a very similar looking knife.
The Le Francais is locked by a cleanly engaging liner lock, which is wonderfully easy to unlock. Due to the small nail hammer the knife can be opened easily with two hands. The wonderfully pointed blade is very well suited for fine work and the cutting edge, which is sharpened on buffalo leather, comes with an enormous sharpness. The Sandvik 19C27 steel used is highly rust resistant and therefore completely unproblematic in combination with food.
All in all you get a really great piece of French knife culture, which will surely take a special place in your collection.
Curly birch, comes from Norway. The light wood has a beautiful natural grain.
Please note, each knife is unique and differs from the knives shown in the picture, because the selected materials are natural materials.
Wüsthof Classic vegetable knife
The vegetable knife from Wüsthof has a blade length of 8 cm and is suitable for small cutting tasks such as chopping, cleaning and decorating fruits and vegetables.
Blade material: chrome-molybdenum-vanadium steel forged Blade length: 8 cm
Perceval 9.47 2-piece table knife set olive
When Yves Charles, current owner of the French knife manufacturer Perceval, was still a star chef in Paris, he created his own table knife based on the simple "Les Fancais". The 9.47. It is the perfect knife for lovers of ergonomics, but who do not want to give up good cutting properties. Simple and elegant, the 9.47 knife is characterized by clean, timeless lines.
Dimensions: 217 mm x 19 mm x 10.5 mmBladeBlade length: 107 mm width: 19 mmThickness: 2,5 mmSteel: 14C28 (Sandvik) - cryogenic treatmentRockwell hardness: 59 HRCSlowly ground and polished in the traditional way with roughened buffalo leather
HandleLength: 110 mmMaterial: olive woodMounting with allen screws (stainless steel)
Spyderco UKPK Slipjoint
It's no big secret that the laws regarding knives and carrying them in public are much stricter in Europe than in the USA.However, Spyderco was one of the first major manufacturers to address this problem, and with the UKPK (UK Penknife) has created a kind of European classic in its own range, which even meets the very strict laws in the UK.Two important factors come together here: although the UKPK - thanks to the Spyderholes - can be opened with one hand, the blade does not lock when open, but is held by a strong back spring (similar to a Swiss Army knife, for example).
This allows you to carry the UKPK perfectly legally.
However, despite its small size, lack of locking mechanism and extremely lightweight construction, the UKPK is a highly functional pocket knife. The thin blade proves to be a real cutting devil in everyday EDC thanks to the raised flat grind and shows that Spyderco really had a cutting tool in mind here and not a folding crowbar. The built-in CTS BD1 steel is very corrosion resistant and also easy to bring back to razor sharpness after use.
The FRN (Fiber Reinforced Nylon) handle scales do not require steel plates underneath and ensure a construction that is as light as it is sturdy. At a mere 48 grams, the UKPK hardly adds any weight in your pocket.
The deep-carry pocket clip can be mounted on the left or right side, which makes the knife interesting for left-handers as well.
All in all, with the UKPK you get a really highly suitable EDC pocket knife which not only complies with local legislation, but also proves to be a loyal companion.
Kai Shun Premier Office Knife
For the trend-setting Shun Premier Tim Mälzer series, KAI developed more knives from 32 layers of corrosion-resistant Damascus steel. This is finished with a hand-hammered finish known in Japan as Tsuchime, combining timeless aesthetics and ultimate sharpness. The blades feature a solid core of VG MAX steel with a hardness rating of 61±1 HRC.
True to Tim Mälzer's premise: "A good knife not only makes work easier, it also helps you succeed", each of the carefully crafted damask knives has been meticulously matched to its respective field of application by the Japanese forging artists from Seki City. All shapes also guarantee precise cutting performance for both right-handed and left-handed users due to the particularly symmetrical shape of their walnut handle.
Blade length: 4", 10 cm Handle length: 10.5 cm
Chris Reeve Green Beret Serrated
Chris Reeve and William W. Harsey design
with Micarta handle
with black cerakote
with black or coyote brown nylon sheath
with or without blade serrations
Perceval L08 Olive - The modern Classic
Olive wood handle
inclusive leather sheath
Perceval have managed to establish something like a modern classic in the French knife culture with the L08.
With the wonderfully rounded curve of the handle, the L08 is slightly reminiscent of the rear of an old Cadillac - here the manufacturer has managed to combine the time-honored tradition of knife making in France with the modern design of the 20th century.The result is a wonderfully harmonious looking knife, which also fits wonderfully in the hand.
The sheepfoot blade, which tapers round to the tip, allows safe working and proves to be extremely easy to cut.This is partly due to the flat grinding, which is raised to the back of the blade, and partly due to the extremely thin cutting bevel. Perceval sharpen their knives all by hand on slowly rotating grinding stones. The final sharpening is also done - very traditionally - on a belt of roughened buffalo leather.
An absolute highlight is the extremely satisfying noise when the liner lock is engaged. Here you simply notice how precisely these knives are manufactured.
Since a pocket clip would disturb the great line, a leather liner lock is included. So you can take your L08 with you comfortably without scratching the handles.
The olive wood, comes from Southern Europe and is characterized by its warm wood tone.
Please note, each knife is unique and differs from the knives shown in the picture, because the selected materials are natural materials.
Viper Orso2 Green Micarta
Jens Anso Design
LO-QPM20-4 blade
Stonewashed blade finish
Micarta handle
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand. The show side of this version is made of green micarta
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
Viper Orso2 Titan 3D
Jens Anso Design
LO-QPM20-4 blade
Satin blade finish
Sandblasted Titan handle
Whats new?
How do you make an already great knife even better? You revisit the design, change a few key areas, but don't change the basic DNA of the knife.
That's exactly what Jens Anso did with the Orso 2.
This version of the already great Orso design has been improved a bit in a few places. Instead of a linerlock, a framelock is now used. This is of course equipped with a combined steel insert / overtravel stop. On the one hand, this prevents wear and on the other hand, you can't accidentally overstretch the lockbar.
The handle scales of the Orso 2 are of course milled from solid titanium. Thanks to the contoured edges, the knife lies very comfortably in the hand.
Another innovation can be found in the steel: Viper uses the LO-QPM 20-4 steel for the first time on the Orso 2. This is an alloy produced by Lohmann in Germany that is almost identical to the popular M390 steel. Here you get a very rust resistant blade that holds sharpness for a very long time, so you can work with it for a long time without worry.
Typical of Jens Anso's design is the continuous, flowing line of the knife. If you open the blade with the small flipper tab, you get a continuous line that just looks beautiful. Thanks to the built-in ball bearings, the knife also provides a lot of fun.
The small details typical of Jens Anso provide a visual highlight: the 3D milled clip, the filigree backspacer, as well as the small collar around the pivot screw, round off the Orso 2 visually wonderful.
Böker Plus Damascus Gent 2
The extremely lightweight and low-profile design of this noble gentleman's knife with only one steel plate ensures superior comfort. The dark ebony and the expressively grained Damascus blade with 67 layers result in a simple, impressive elegance. The smaller version offers even more carrying comfort with the same exclusive features.
MKM Isonzo Black - Cleaver
Jesper Voxnaes design
handy compact outdoor knife
large eyelet in the back perfect to attach it to your equipment with a carabiner
with Torx key 6/8
Ramon Hanelt Fixed Blade Knife (#84) with Leather Sheath
Fixed blade knife from Ramon Hanelt
Steel: 1.2510 (not stainless)
Handle material: olive wood
Leather sheath and leather strap included
Ramon Hanelt Fixed Blade Knife (#86) with Leather Sheath
Fixed blade knife by Ramon Hanelt
Steel: 1.2419 (not stainless)
Handle material: Bahia rosewood
Leather sheath (bordeaux) and leather strap included
