EDC Knives at the Knife Lounge

Ramon Chaves Design Aluminum handle Magnacut DropPoint blade with black PVD finish Includes Fliz sheath Each knife is handcrafted at the Böker factory in Solingen and meets the highest standards of quality, craftsmanship, and design

All Black Version Blade made of CPM S30V with DLC coating Aluminium handle

Handle made of FRN Blade made of CTS BD-1N Weighs only 23 grams

G10 handle with peel ply texture 8Cr13MoV stainless steel blade with black-washed finish with reversible clip

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

Somewhere in Bali, deep in the rainforest on the way to a waterfall, a Java flying frog sits on a wet leaf and stares at Steven Kempa. Green and orange, huge eyes, completely unimpressed. That moment apparently stuck with the Vulpex designer and at some point it had to come out — the result is right here: the VK-Frok, manufactured by Reate. Kempa, who you may already know from his other Vulpex designs like the VK-Core, crossed his signature organized lines with something new for this project: organic, rounded shapes and a deliberately chunky presence. The 6Al4V titanium handle sits solidly in your hand, and you’ll notice the total weight of 164 g both in hand and in your pocket — which is exactly the point: the Frok doesn’t want to be a lightweight. It wants to be a user, with character. The blade: 8.1 cm of Elmax steel at 60 HRC, a modified sheepsfoot blade with a flat grind and a hefty 4.2 mm spine. The Böhler powder steel delivers the combination of edge retention and corrosion resistance you need for everyday life — packages, apples, zip ties, whatever comes up. And the sturdy tip of the sheepsfoot blade forgives the occasional rougher job. Now for the part the Frok is rightly getting attention for: the thumbstud! The big stud made of solid copper is Kempa’s maker’s mark and, at the same time, the frog’s eye from the jungle. If that ends up being too much for you: a low-profile replacement stud is included, and the knife runs completely without studs too. Swapping is done with the included “frog feet” tool, whose shape — just like the pivot screw and counter disc — is inspired by frog feet. The theme, carried all the way through. The frame lock engages with the precision Reate is known for. The titanium clip carries tip-up on the right side. The VK-Frok comes in six versions — from hand rubbed with acid wash to crystallized titanium to the fully darkwashed variant. So who is this for? Anyone looking for a premium folder with substance and a design that tells a real story instead of just illustrating a spec sheet. The frog made the jump from the jungle straight into your pocket.

in cooperation with WE Knife Toni N. Tietzel design CPM 20CV blade with hand-satin or stonewashed finish 4 carrying options, switchable with the included Hardware Kit: Two-handed – without lock Two-handed – with lock One-handed – without lock One-handed – with lock (ships in this configuration) Imagine packing your bag in the morning without having to wonder whether the knife is even allowed where you're headed. That's exactly the question Toni Tietzel — the mind behind TNT Knives — spent years chewing on. The answer is called Slip Bang, and it comes exclusively from your Knife Lounge in Hamburg. The trick: instead of picking the knife that happens to fit the law, you build the one knife to fit. With two Torx sizes you turn the Slip Bang in seconds from a two-handed slipjoint without any lock all the way up to a full one-handed locking folder. In between sit the stages with thumb stud or slider — you swap a few inlays and bits of hardware, tighten the screws, done. No special tools, no fuss. The Hardware Kit you need for that comes included with the Slip Bang. Good to know: the Slip Bang ships with the thumb studs and slider already installed, meaning it opens one-handed and locks. If you want the free, two-handed slipjoint configuration without a lock instead, just remove the thumb studs and slider. What stays constant is the part that matters most: the blade. A drop point in CPM-20CV, a steel that holds its edge for ages and doesn't fret about a bit of moisture. The grind is, as always, thin and built for cutting performance. The handle is grade-5 titanium, the stuff you'd otherwise find in aircraft parts. Locking is handled by the newly developed TNT-Lock, and the whole thing is assembled at We Knife, the parent of Civivi, who know how to put something like this together cleanly. And now the part that matters for us here in Germany. As a two-handed slipjoint without a lock, the Slip Bang doesn't fall under § 42a and is legal to carry — that's the configuration for everyday use over here. As shipped, thumb studs and slider are installed, so the knife opens one-handed and locks. Whether that unambiguously makes it an Einhandmesser under §42a isn't entirely clear — more on that below in the FAQ. On Kickstarter the Slip Bang was funded with over €54,000 — three and a half times its goal — so the scene has voted pretty clearly. The blade measures around 8.4 cm, and opened up it comes to just under 19.8 cm at just under 110 g. By default the Slip Bang comes with a stonewash finish; the satin version is limited to 150 pieces. Included in the Hardware Kit Thumbstud inlays (both sides) T6 screws for the inlays T6 screws for the thumbstuds Cover plate (for two-handed configuration) T10 slider screw T10 clip screw T10 pivot screw Pivot barrel + D-shape pivot Small V-spring for the slider Frequently asked questions about the TNT Knives Slip Bang Does it matter if you close the knife quickly, letting it slap shut? No. A stop pin prevents the blade from striking the backspring, even when closing it quickly. The stop pin is press-fitted into the blade and runs in a circular groove machined into the scales, giving a precise stop in both the open and closed positions. As far as we know, this is also a unique feature for a slipjoint, though we can't say that with absolute certainty. Is the Slip Bang an Einhandmesser under §42a as shipped? As shipped, the thumb studs and slider are installed, so the knife opens one-handed and locks. Whether that unambiguously qualifies it as an Einhandmesser under §42a WaffG isn't entirely clear, since the lock on the Slip Bang is engaged separately and, as far as we know, there's no definitive ruling on this yet. If you want to be on the safe side, carry the knife in a closed container in public, or remove the thumb studs and slider for the unlocked, two-handed configuration. Do I need extra tools to reconfigure it? You need two Torx sizes: T6 for the inlays and thumbstud screws, T10 for the slider, clip, and pivot. Both are common sizes that most multitools with a bit set cover. The Hardware Kit you need is included with the Slip Bang. How do I care for the CPM-20CV blade? CPM-20CV is corrosion-resistant, but like any steel, not fully rust-proof. After contact with moisture or acid (for example when cutting fruit), just wipe the blade down and store it dry.

in cooperation with WE Knife Toni N. Tietzel design CPM 20CV blade with hand-satin or stonewashed finish 4 carrying options, switchable with the included Hardware Kit: Two-handed – without lock Two-handed – with lock One-handed – without lock One-handed – with lock (ships in this configuration) Imagine packing your bag in the morning without having to wonder whether the knife is even allowed where you're headed. That's exactly the question Toni Tietzel — the mind behind TNT Knives — spent years chewing on. The answer is called Slip Bang, and it comes exclusively from your Knife Lounge in Hamburg. The trick: instead of picking the knife that happens to fit the law, you build the one knife to fit. With two Torx sizes you turn the Slip Bang in seconds from a two-handed slipjoint without any lock all the way up to a full one-handed locking folder. In between sit the stages with thumb stud or slider — you swap a few inlays and bits of hardware, tighten the screws, done. No special tools, no fuss. The Hardware Kit you need for that comes included with the Slip Bang. Good to know: the Slip Bang ships with the thumb studs and slider already installed, meaning it opens one-handed and locks. If you want the free, two-handed slipjoint configuration without a lock instead, just remove the thumb studs and slider. What stays constant is the part that matters most: the blade. A drop point in CPM-20CV, a steel that holds its edge for ages and doesn't fret about a bit of moisture. The grind is, as always, thin and built for cutting performance. The handle is grade-5 titanium, the stuff you'd otherwise find in aircraft parts. Locking is handled by the newly developed TNT-Lock, and the whole thing is assembled at We Knife, the parent of Civivi, who know how to put something like this together cleanly. And now the part that matters for us here in Germany. As a two-handed slipjoint without a lock, the Slip Bang doesn't fall under § 42a and is legal to carry — that's the configuration for everyday use over here. As shipped, thumb studs and slider are installed, so the knife opens one-handed and locks. Whether that unambiguously makes it an Einhandmesser under §42a isn't entirely clear — more on that below in the FAQ. On Kickstarter the Slip Bang was funded with over €54,000 — three and a half times its goal — so the scene has voted pretty clearly. The blade measures around 8.4 cm, and opened up it comes to just under 19.8 cm at just under 110 g. By default the Slip Bang comes with a stonewash finish; the satin version is limited to 150 pieces. Included in the Hardware Kit Thumbstud inlays (both sides) T6 screws for the inlays T6 screws for the thumbstuds Cover plate (for two-handed configuration) T10 slider screw T10 clip screw T10 pivot screw Pivot barrel + D-shape pivot Small V-spring for the slider Frequently asked questions about the TNT Knives Slip Bang Does it matter if you close the knife quickly, letting it slap shut? No. A stop pin prevents the blade from striking the backspring, even when closing it quickly. The stop pin is press-fitted into the blade and runs in a circular groove machined into the scales, giving a precise stop in both the open and closed positions. As far as we know, this is also a unique feature for a slipjoint, though we can't say that with absolute certainty. Is the Slip Bang an Einhandmesser under §42a as shipped? As shipped, the thumb studs and slider are installed, so the knife opens one-handed and locks. Whether that unambiguously qualifies it as an Einhandmesser under §42a WaffG isn't entirely clear, since the lock on the Slip Bang is engaged separately and, as far as we know, there's no definitive ruling on this yet. If you want to be on the safe side, carry the knife in a closed container in public, or remove the thumb studs and slider for the unlocked, two-handed configuration. Do I need extra tools to reconfigure it? You need two Torx sizes: T6 for the inlays and thumbstud screws, T10 for the slider, clip, and pivot. Both are common sizes that most multitools with a bit set cover. The Hardware Kit you need is included with the Slip Bang. How do I care for the CPM-20CV blade? CPM-20CV is corrosion-resistant, but like any steel, not fully rust-proof. After contact with moisture or acid (for example when cutting fruit), just wipe the blade down and store it dry.

Non-Locking automatic knife Blade is held open by a spring Push-button mechanism Aluminum handle D2 blade

CIVIVI Baby Banter Slip Joint – the carry-legal EDC for Germany The CIVIVI Baby Banter Slip Joint is the Germany-legal evolution of the popular Baby Banter – and that's exactly what makes it special. While the classic Baby Banter with Liner Lock cannot legally be carried in public in Germany, the Baby Banter Slip Joint is legal to carry where permitted under § 42a of the German Weapons Act: no locking mechanism. You can simply take it with you. The knife was designed by Ben Petersen – known in the knife community as @ben_banters. With the Baby Banter, Ben created an icon celebrated for its clean lines, precise fit and finish, and unmistakable profile. The Slip Joint brings all of that to the table without any compromise on everyday carry comfort. The Nitro-V steel blade impresses with a hardness of 59–61 HRC, excellent edge retention, and easy maintenance. The 5.94 cm (59.4 mm / 2.34") blade features a flat grind and stonewash finish – delivering reliable cutting performance with minimal upkeep. The Drop Point profile keeps you in full control of the cut, whether you're opening packages, doing light prep work, or simply carrying a dependable EDC tool. At 8.33 cm (83.3 mm / 3.28") closed and weighing just 67 g (2.36 oz), the knife disappears effortlessly into any pocket. The Baby Banter Slip Joint is available in two versions: blue G10 handle scales paired with a gray stonewashed blade – a clean, modern look. Or Cuibourtia wood handle scales with a black stonewashed blade, offering a warmer, more natural aesthetic. Both variants feel premium in hand and make one thing clear: this is not a budget knife in the cheap sense. This is CIVIVI – the value line of WE Knife, that feels anything but cheap. Under the hood, the knife rides on bronze washers at the pivot for a smooth, consistent action. The blade is opened one-handed via thumb stud. The reversible pocket clip supports tip-up carry for both left- and right-handed users. In short: the CIVIVI Baby Banter Slip Joint is the perfect EDC knife for anyone who refuses to compromise on design in Germany – while staying firmly on the right side of the law. Frequently asked questions about the CIVIVI Baby Banter Slip Joint Is the CIVIVI Baby Banter Slip Joint legal to carry in Germany? Yes. The CIVIVI Baby Banter Slip Joint is legal to carry in Germany where permitted. As a slip joint knife – with no locking mechanism, meaning the blade does not lock open – it does not fall under the restrictions of § 42a of the German Weapons Act. The blade length of 5.94 cm is well below the 12 cm legal threshold. What is the difference between the Baby Banter and the Baby Banter Slip Joint? The classic CIVIVI Baby Banter features a Liner Lock that holds the blade open in a fixed position, which means it cannot legally be carried in public in Germany. The Baby Banter Slip Joint has no locking mechanism – the blade does not lock open – making it legal to carry where permitted under German weapons law. What is a slip joint knife? A slip joint knife has no locking blade mechanism. Instead, spring tension holds the blade open. When sufficient back pressure is applied, the blade folds closed again. This design is precisely why slip joint knives are treated as tools rather than prohibited weapons under German law. What is Nitro-V steel? Nitro-V is a stainless steel alloy with a high nitrogen content. It offers excellent edge retention, good corrosion resistance, and is easy to resharpen. In CIVIVI knives, Nitro-V is hardened to 59–61 HRC – a well-balanced combination of cutting performance and low maintenance. How do you open the CIVIVI Baby Banter Slip Joint? The CIVIVI Baby Banter Slip Joint is opened one-handed via a thumb stud – a small pin at the blade base that allows the blade to be unfolded with the thumb. What makes it legal to carry is not the opening method but the absence of a locking mechanism: the blade does not lock open, keeping it fully compliant with § 42a of the German Weapons Act.

CIVIVI Baby Banter Slip Joint – the carry-legal EDC for Germany The CIVIVI Baby Banter Slip Joint is the Germany-legal evolution of the popular Baby Banter – and that's exactly what makes it special. While the classic Baby Banter with Liner Lock cannot legally be carried in public in Germany, the Baby Banter Slip Joint is legal to carry where permitted under § 42a of the German Weapons Act: no locking mechanism. You can simply take it with you. The knife was designed by Ben Petersen – known in the knife community as @ben_banters. With the Baby Banter, Ben created an icon celebrated for its clean lines, precise fit and finish, and unmistakable profile. The Slip Joint brings all of that to the table without any compromise on everyday carry comfort. The Nitro-V steel blade impresses with a hardness of 59–61 HRC, excellent edge retention, and easy maintenance. The 5.94 cm (59.4 mm / 2.34") blade features a flat grind and stonewash finish – delivering reliable cutting performance with minimal upkeep. The Drop Point profile keeps you in full control of the cut, whether you're opening packages, doing light prep work, or simply carrying a dependable EDC tool. At 8.33 cm (83.3 mm / 3.28") closed and weighing just 67 g (2.36 oz), the knife disappears effortlessly into any pocket. The Baby Banter Slip Joint is available in two versions: blue G10 handle scales paired with a gray stonewashed blade – a clean, modern look. Or Cuibourtia wood handle scales with a black stonewashed blade, offering a warmer, more natural aesthetic. Both variants feel premium in hand and make one thing clear: this is not a budget knife in the cheap sense. This is CIVIVI – the value line of WE Knife, that feels anything but cheap. Under the hood, the knife rides on bronze washers at the pivot for a smooth, consistent action. The blade is opened one-handed via thumb stud. The reversible pocket clip supports tip-up carry for both left- and right-handed users. In short: the CIVIVI Baby Banter Slip Joint is the perfect EDC knife for anyone who refuses to compromise on design in Germany – while staying firmly on the right side of the law. Frequently asked questions about the CIVIVI Baby Banter Slip Joint Is the CIVIVI Baby Banter Slip Joint legal to carry in Germany? Yes. The CIVIVI Baby Banter Slip Joint is legal to carry in Germany where permitted. As a slip joint knife – with no locking mechanism, meaning the blade does not lock open – it does not fall under the restrictions of § 42a of the German Weapons Act. The blade length of 5.94 cm is well below the 12 cm legal threshold. What is the difference between the Baby Banter and the Baby Banter Slip Joint? The classic CIVIVI Baby Banter features a Liner Lock that holds the blade open in a fixed position, which means it cannot legally be carried in public in Germany. The Baby Banter Slip Joint has no locking mechanism – the blade does not lock open – making it legal to carry where permitted under German weapons law. What is a slip joint knife? A slip joint knife has no locking blade mechanism. Instead, spring tension holds the blade open. When sufficient back pressure is applied, the blade folds closed again. This design is precisely why slip joint knives are treated as tools rather than prohibited weapons under German law. What is Nitro-V steel? Nitro-V is a stainless steel alloy with a high nitrogen content. It offers excellent edge retention, good corrosion resistance, and is easy to resharpen. In CIVIVI knives, Nitro-V is hardened to 59–61 HRC – a well-balanced combination of cutting performance and low maintenance. How do you open the CIVIVI Baby Banter Slip Joint? The CIVIVI Baby Banter Slip Joint is opened one-handed via a thumb stud – a small pin at the blade base that allows the blade to be unfolded with the thumb. What makes it legal to carry is not the opening method but the absence of a locking mechanism: the blade does not lock open, keeping it fully compliant with § 42a of the German Weapons Act.

Zac Whitmore Design Cuibourtia wood and brass handle ClipPoint blade made of 14C28N with a satin finish

Pete's Pirate Life Design Aluminum handle 14C28N ClipPoint blade

Pete's Pirate Life Design Aluminum handle 14C28N ClipPoint blade

The Boy's Knife pattern is one of the oldest and most popular slipjoint silhouettes around — that slim, elongated handle with the gently rounded shoulders that fits the hand so naturally you wonder why anyone ever bothered doing it differently. Jack Wolf Knives took exactly that pattern as the foundation for the first FIXedc in the Gateway series. No slipjoint, no unfolding — just a simple, compact fixed blade. 15.2 cm overall length, 7.6 cm blade in Sandvik 14C28N with a flat grind and satin finish — it sits in the hand like something you've carried for years. 3 mm blade stock, 46 g without the sheath. Light enough to forget about, until you actually need it.  As always with Jack Wolf Knives, it's the handle scales that set each version apart. From understated jute micarta to bold, eye-catching options — the full range is on offer. The Gateway FIXedc ships with a Kydex sheath fitted with a reversible steel clip that adjusts to multiple carry positions, so you carry it the way it works for you, not the way the manufacturer assumed. A snake knot paracord lanyard comes pre-attached. Made in China, at a price that makes you look twice: under €80 for a fixed blade with this level of detail and these materials is, by Jack Wolf standards, no longer a surprise — but still pretty remarkable.

G10 handle with peel ply texture 8Cr13MoV stainless steel blade with satin finish with reversible clip

Thumb to the hole, a quick flick, blade’s open. Once you’ve got the Spyderco flick dialed in, you do the whole thing in your sleep — and the Mantra 4 CF is built exactly for that. At its core this is a classic EDC folder from Spyderco. The blade measures 8.5 cm, wears a clean satin finish and is made from 8Cr13MoV. No supersteel, and it isn’t trying to be: the steel is corrosion-resistant, easy to maintain and back to shaving-sharp in a few minutes on a stone. For a knife you actually use every day instead of babying, that’s a pretty relaxed combination. The handle is what really sets it apart from the standard Mantra. Carbon fiber meets G10, and the scales carry a peel-ply texture — that slightly rough, almost gritty surface that gives you real grip in the hand without getting annoying. Inside, the blade rides on ball bearings and is held by a liner lock. At 59 g and 10.6 cm closed, the thing disappears deep and discreet into your pocket thanks to the repositionable deep-carry clip. Lefties get along with it to a degree, and the clip can be removed and swapped over. One thing worth knowing if you’re in Germany: the Mantra 4 opens one-handed via the thumb hole and locks with a liner lock. That makes it a one-hand knife under §42a, so it may not be carried in public without a legitimate reason. Buying, owning and transporting it in a closed container is no problem at all. As a companion at the workbench, on the desk or out in the field at home and on the road with good reason, it plays its strengths to the full.

More knife than the price suggests The Cicada’s Wing by Bestechman is one of those knives that makes you wonder why it’s actually this affordable. A solid stainless steel handle with a grippy frag pattern, an honest 10Cr15MoV blade, and a total of six different finish options – that’s an EDC that delivers far more than its price would suggest. The stainless steel handle is robust, low-maintenance and sits securely in the hand thanks to its machining, without feeling sharp or uncomfortable. The blade made from 10Cr15MoV may not be a so-called “super steel”, but it’s easy to maintain and quick to resharpen – not exotic, just a steel that has proven itself reliably for years. Depending on the version, you can choose from different finishes, ranging from understated to more eye-catching. Why the name “Cicada’s Wing”? We can only guess. But here’s a theory: cicadas are tough, they keep coming back and are pretty hard to kill. Sounds fitting. That’s exactly how this knife feels – robust, straightforward and built to be used, not forgotten in a drawer. Bottom line: a lot of knife for the money, no gimmicks, no empty promises. Just a solid Bestechman EDC knife that does exactly what it’s supposed to do in everyday use.

Micarta Showside Titanium Framelock Wharncliff Blade The Mutineer 14C28N blade steel The Mutineer from Picaroon Tools is a handy little folder that has a wonderful EDC size. The handle is designed in such a way that it offers a very universal hand position, so that large as well as small hands are offered a great handling here. The matte titanium handle scales have a cool look that accentuates the modern appearance of this framelock folder (with steel insert, of course). The show side of this version is made of Micarta. The focal point of this knife is clearly the ball bearing Wharncliff blade made of 14C28N steel. The very fine edge offers a super perfomance and has a nasty tip, with which you can also perform fine work wonderfully.The thumb recess on the back of the blade ensures that you can, for example, bring a lot of force on the blade when carving. Together with the 3D milled pocket clip, the lanyard hole and an impressive performance, you get here a really powerful EDC pocket knife.

Titanium Framelock Folder S35VN Blade Designed by Picaroon Tools The Mutineer The Mutineer from Picaroon Tools is a handy little folder that has a wonderful EDC size. The handle is designed in such a way that it offers a very universal hand position, so that large as well as small hands are offered a great handling here. The matte titanium handle scales have a cool look that further emphasizes the modern appearance of this framelock folder (with steel insert, of course). The focus of this knife is clearly the ball-bearing Wharncliff blade made of S35VN steel. The very fine tapered edge offers a super perfomance and has a nasty tip, with which you can also perform fine work wonderfully. The thumb recess on the back of the blade ensures that you can bring a lot of force on the blade, for example, when carving. Together with the 3D milled pocket clip, the lanyard hole and an impressive performance, you get a really powerful EDC pocket knife.