What fits into the ClipSlip?
Small size:
For many pocket knives under 10 cm length, like for example:
Victorinox Pioneer
Benchmade Proper
Medium size:
For many pocket knives up to a length of 11 cm. For example
Perceval L08
Viper Key
Otter Mercator
Large size:
For many pocket knives up to a length of 12 cm. For example
Victorinox Wine Master
Chris Reeve Large Sebenza
Buck 110
Outer Dimensions:
Large:
13 cm x 6,5 cm
Medium:
12 cm x 5,5 cm
Small:
11 cm x 5,3 cm
Chris Reeve Knives:
Large Sebenza 31 / Small Sebenza 31 / Impinda / Umnumzaan
|
Finish:
Sandblasted
Chris Reeve Knives MIM Pocket Clip – Precision Meets Innovation
The mere fact that this clip exists is newsworthy. After all, new products from Chris Reeve Knives (CRK) are extremely rare and only enter serial production after very long development and testing phases. What makes this clip special – besides its subtle and truly elegant design – is the manufacturing process. Instead of a conventionally bent or even milled clip, you get a clip produced using MIM technology (Metal Injection Molding). While this process itself isn’t new, it still plays only a minor role in modern knife production.
A short excursion into the world of metal processing
Metal Injection Molding (MIM) is a process used to produce very small and complex metal parts – similar to plastic injection molding, but with metal.
In this case, fine titanium powder is mixed with a binder (usually made of wax and polymer) until it forms a viscous mass. This mixture is then injected into a mold that defines the shape of the part. Afterwards, the piece is heated to remove the binder – a step known as debinding.
What remains is a porous titanium part that is not yet solid. It is then sintered at very high temperatures, just below titanium’s melting point: the individual powder particles fuse together, the part shrinks slightly, and becomes extremely dense and strong. The result is a precise and durable titanium component that’s nearly as tough as forged titanium – yet significantly more affordable and capable of much more complex geometries.
The new MIM Clip by Chris Reeve Knives
Back to our MIM Clip by Chris Reeve: it is available in two versions – Inkosi and Sebenza 31 / Impinda / Umnumzaan – and in two finish options: glassblasted or sandblasted.
Each package includes the matching stainless steel screw, allowing you to install your clip in seconds. Don’t be surprised: tolerances at Chris Reeve Knives are so tight that the clip fits with exceptional precision.
A true piece of engineering craftsmanship – innovative in production, beautifully detailed, and unmistakably CRK: uncompromising in quality and precision.
Crowgear Don't Worry Stone - Metal Inlay
Inlay for your Don't Worry Stone
Dimensions: 44 mm x 24 mm x 3 mm
Titanium or Brass
Engraving
You want an engraving on your Worry Stone? No problem! We would be happy to engrave your personal message on the brass inlay.You can find our fonts here. This costs 25,- €
Please reply to the order confirmation email and let us know the following questions:1. where should we engrave? - hidden on the inside of the inlay or directly readable on the outside.2. what should we engrave? - your text wish3. what font do you want?
Please note that engraved products are not returnable!We need about 3 - 5 working days for the engraving.
Titanium scales for the Uk Pen Knife with cross cut pattern. Includes washers. Made in Hamburg, Germany. Delivery does not include knife.For the ultimate UKPK There's now something really fine for your Spyderco UKPK - exclusively in the Knife Lounge: the new titanium handle scales in the crosscut pattern, naturally manufactured by Daily Customs in Hamburg. What makes them special? The striking crosscut milling pattern is not only an absolute eye-catcher, but also ensures a really good grip - regardless of whether you use your knife in the rain, snow or at the height of summer. And because the pattern looks so good, the UKPK will suddenly look really sexy for your next EDC photo shoot.
Of course, the handle scales fit any FRN-version of the UKPK - whether old, new or somewhere in between. To ensure that it not only looks good, but also runs at the highest technical level and that your knife will still be working in ten years' time, you will also receive a set of bronze washers - also developed and manufactured by Daily Customs. Don't feel like screwing....? You want to use it straight away and don't feel like screwing? No problem! For a fee of just 10 euros, we'll do the conversion for you - provided you order your UKPK directly from our store. Of course, this is only possible if the knife is in stock.
Daily Customs 91 mm Cross Cut Titanium - Knife Lounge Exclusive
Front and back with elaborate cross cut texture A clip can be mounted with 3 screws but is not includedSwiss Army Knife is not included
Exclusively in the Knife Lounge, you'll find the new Cross-Cut pattern 91mm scales for your Victorinox pocket knife. You have the choice: gray, stonewashed titanium or bright Blaze Orange! Both versions feature an intricate and deep milling pattern on the front and back. Of course, you still have the option to mount a pocket clip.
Due to the materials used, there is naturally a difference in weight: while titanium always brings a substantial weight, the G10 scales only add a few grams. This might be an important consideration for the height of summer... By the way, did you know that in the shop, you can select your matching Victorinox with just one click? And while we're packaging it, we're happy to mount the scales for you as well. Naturally, free of charge! This way, you'll receive your custom Vic already finished and ready to go.Dimensions:Length 91 mmWidth 20 mmHeight 30 mm
Fits the Sebenza 31 and 21
Small or Large
Titanium
Made by Daily Customs
A nice backview....
The KLE Backspacer ensures that the back of your Sebenza gets a clean, closed surface, which is somewhat reminiscent of the look of a modern Slipjoint. Of course, the functionality of your knife does not change in any way. Of course, titanium is used here, whose surface is very similar to the handle scales of Chris Reeve knives. The Backspacer is manufactured exclusively for KnifeLounge by Daily Customs in Hamburg. Thus, the entire product, from design, to packaging, to the finished product is made entirely in Germany.
The KLE Backspacer fits both the current Sebenza 31 and its predecessor, the Sebenza 21. Of course, you can choose between the Large and the Small version for both versions.
If you want to install the Backspacer in your Sebenza 31, you will definitely need the matching body pin and screw kit from Chris Reeve, otherwise the Backspacer cannot be installed. While the blade stop on the Sebenza 21 is designed in such a way that you can continue to use the installed body pin, the body pin of the Sebenza 31 is completely replaced.
Chris Reeve Knives does not produce, nor endorse this product. The use of this product can void the warranty of your knife.V2 - the second generation
We have completely revised the backspacer, version 2 now has a milled chamfer, which prevents the blade from hitting the backspacer.
RGT Clip for Chris Reeve Knives
Replacement Clips (clip only) for CRK knives. Fits most models.
Blasted clips are very similar but not perfect to CRK stock finish. Please look at the pics before ordering.
Clips may need to be slightly hand bent to make sure the clips touch the lock-bar. Go slow as to not "kink" the clip.
RGT Clip for Chris Reeve Knives
Replacement Clips (clip only) for CRK knives. Fits most models.
Blasted clips are very similar but not perfect to CRK stock finish. Please look at the pics before ordering.
Clips may need to be slightly hand bent to make sure the clips touch the lock-bar. Go slow as to not "kink" the clip.
Insert for the Titanium Pocket Tool (TPT)/TPT SLIDE Material: Stainless steel Contains: (2) Raw stainless steel inserts (2) Black stainless steel inserts (anodized) 5.8 cm long / 1.9 cm high / 0.6 cm thick / 2.6 g weight
Betsy Ross Design
Quick change scales with Cosmo-Kitty chasing a knife
for your KNAFS Lander 2 EDC Knife
Material: G10
What you need to change:
Torx tool for knives
Screw lock
