Stahlwerk Cult Sale KnifeLounge ExclusiveHandle scale with inlay for your Stahlwerk CultBackspacer and handle shell milled from one block of titanium Custom Upgrade each grip shell is one of a kindOne of OneThe grip shell and backspacer are milled from a single block of titanium and represent a custom upgrade. Each grip shell is unique - a one-of-one masterpiece. This is where perfect series production meets precision craftsmanship. Each inlay was made by Marcus Stein in loving handwork.
The result?
Each handle is unique and only available once. You have the choice between ten different scales. You can choose from versions made of Micarta, Mocuti, G10, wood and Voodoo resin. The inlays are screwed into the precision milled pocket of the titanium scales, and above the axle screw you will find our Knife Lounge logo. With these scales, you not only give your Stahlwerk Cult a unique look, but also turn your series folder into an absolutely unique piece that exists only once in the world.
Lynch Deepcarry clip Demko AD 20/ AD 20.5fits Demko Ad20 and AD20.5Stonewashed finishmade of titanium grade 5Made in USADimensions:Clip length: 5.08 cm
Lynch Deepcarry Clip Spycerco Native 5 FRNDeep Carry Clip specifically for the Native 5 FRN made of Titanium Grade 5includes screw set T6Made in USAThe clip also fits, among others: Native 5 LightweightNative 5 SaltLil' Native LockbackLil' Native SlipiptDimensions:Clip length: 5.33 cmDistance between screw holes (center): 1.07 cm
Lynch Deepcarry-Clip Titanium standard for Spyderco
strong Deepcarry-Clip
made out of titanium
usable for most Spyderco models:
Advocat
Amalgam
Canis
Dice
Efficient
Gayle Bradley 2
KaraHawk
Manix 2
Manix XL
Native 5 CF
Native Chief
Nirvana
Para Military 2 (PM2)
Police
Smock (Note: Die mitgelieferten Schrauben passen nicht für das Smock. Verwende hierfür bitte die Spydero Schrauben, die werkseitig verwendet werden)
Swayback
Vallotton Sub-Hilt
Vallotton Lil’ Sub-Hilt4
Yojimbo 2
YoJumbo
Here is a short note from Casey Lynch:
"Your OEM Spyderco Screws will work great with your new Lynch NW Clip, but these `just in case`screws are a good fill in if you have missing or stripped screws. The easiest ways to install: line up the top screw hole, then spin the clip aroung 180° so the clip is hanging off the end of the knife. Drop in the top screw and get it started, but not snug. Now spin the clip around and drop in the lower two screws. Snug all three down tight, starting with the top screw."
Technical specs:
total length:
5,33 cm
Material:
Titanium
Finish:
Sandwashed
Rick Hinderer XM-18 3″ Complete Hardware Kit Titan Working Finish
fits to your Rick Hinderer XM-18 3.5" only
made of titanium with working finish
This kit includes:1- 3.5″ Pivot Screw1- 3.5″ set of handle nuts1- 3.5″ set of standoffs1- 3.5″ set of handle screws1- Lockbar Stabilizer& stabilizer screw
What fits into the ClipSlip?
Small size:
For many pocket knives under 10 cm length, like for example:
Victorinox Pioneer
Benchmade Proper
Medium size:
For many pocket knives up to a length of 11 cm. For example
Perceval L08
Viper Key
Otter Mercator
Large size:
For many pocket knives up to a length of 12 cm. For example
Victorinox Wine Master
Chris Reeve Large Sebenza
Buck 110
Outer Dimensions:
Large:
13 cm x 6,5 cm
Medium:
12 cm x 5,5 cm
Small:
11 cm x 5,3 cm
KnifeLounge Exclusive The ClipSlip "Stormtrooper"
White waxed leather
Sewn by handin 3 sizes
Note:
The leather may rub off especially on light micarta or horn. This is waxed leather. The waxight is very sensitive and will quickly get a "used" look like the product picture.
What fits where?
Size Small:
For many pocket knives under 10 cmclosed length such as:.
Benchmade Proper
Size Medium:
For many pocket knives up to a length of 11 cm. For example
Perceval L08
Viper Key, Hug
Otter Mercator
Size Large:
For many pocket knives up to a length of 12 cm. For example
Chris Reeve Large Sebenza.
Buck 110
You can find the Size Check for printing at Downloads:When printing, make sure your printer prints the document at 99% size. Ideally, the knife should fit in the white space and be less than 1.8 cm thick..
External dimensions:
Large:
13 cm x 6.5 cm
Medium:
12 cm x 5.5 cm
Small:
11 cm x 5.3 cm
Deepcarry Clip specially designed for your Spyderco TenaciousMade in USA from titanium with a Stonewashed finish
Fits to:Tenacious G10AlcyoneAmbitiousAutonomy 2PersistenceRaven 2 G10Reslilience
Chris Reeve Leather Work Mat Perfect surface to work on your knives. The mat is made of leather. So they may have slight nuances and irregularities in coloring.
Supplied without knives or accessories. Dimensions: 30.5 cm x 26.7 cm12 "x10.5"
Knafs Lander 1 Scales Cosmo Kitty Crew
Betsy Ross Design
Quick change scales with Cosmo-Kitty chasing a knife
for your KNAFS Lander 1 EDC Knife
Material: G10
What you need to change:
Torx tool for knives
Screw lock
Rick Hinderer XM-18 3" Scale MicartaMade from high-quality micarta materialProvides a comfortable and secure grip on the knifeAdds a stylish and unique look to the knifeFits perfectly on Rick Hinderer XM-18 3" folding knivesMicarta Scales 3" are the perfect way to customize your XM-18 3.0 folding knife and give it a whole new look. Made from high-quality micarta material and designed by Rick Hinderer Knives, these scales provide a comfortable and secure grip on the knife while adding a stylish and unique touch to it.
