Messer bei der Knife Lounge
Wüsthof Classic Chinesisches Kochmesser 18cm
€229.00
Wüsthof Classic Chinese Chef's Knife 18cm
sturdy chef's knife with durable special plastic handle
blade made of Wüsthof steel
very fine ground
Technical data:
Blade length:
160 mm
Blade material:
Wüsthof steel
Handle material:
Plastic
Dishwasher safe:
No
Viper Katla Canvas Micarta Green
€179.00
Viper Katla Canvas Micarta Green
Solid EDC knife with pocket clip
Jesper-Voxnaes-Design
micarta handle and M390 blade
Hot like a volcano
The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point.
The handle is equipped with micarta scales, finished with a matte stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs.
The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.
Wüsthof Classic Chai Dao 17cm
€129.00
Wüsthof Classic Chai Dao 17cm
sturdy chef's knife with durable special plastic handle
blade made of Wüsthof steel
very fine ground
Technical data:
Blade length:
170 mm
Blade material:
Wüsthof steel
Handle material:
Plastic
Dishwasher safe:
No
Viper Katla Canvas Micarta Black
€165.00
Viper Katla Canvas Micarta Black
Solid EDC knife with pocket clip
Jesper-Voxnaes-Design
micarta handle and M390 blade
Hot like a volcano
The Viper Katla is not only the latest coup of Jesper Voxnaes and Viper Technocut but also the name of one of the most active volcanoes in Iceland. The design of the knife leaves no doubt: here it goes hyper-modern to the point.
The handle is equipped with micarta scales, finished with a matte stonewash. Underneath the scales are steel liners, which also provide the liner lock. This locks the knife cleanly when open and can of course be easily operated with one hand. The blade, which runs on ball bearings, is opened via the small flipper tab that protrudes over the hilt or via the two thumb studs.
The blade is a kind of Spanto shape, as it became world famous through the knives of Rick Hinderer. Here, the shape of a Spearpoint blade is combined with the geometry of a Tanto tip. This makes for a sweeping look, but provides uncanny stability in the front area of the blade. This means that the Katla can definitely be used to work harder. The Böhler M390 blade steel used rounds off the picture perfectly thanks to its outstanding performance.
Laguiole en Aubrac Beech 12cm
€167.00
Laguiole en Aubrac 12 cm beech
Handle material: beech
Liner and bolsters made of stainless steel
Blade steel of stainless 12C27
Laguiole en Aubrac.Length when closed: 12 cm
Laguiole en Aubrac juniper 9cm
€152.00
Laguiole en Aubrac 12 cm horn
Handle material: horn
Liner and bolsters made of stainless steel
Blade steel of stainless 12C27
Laguiole en Aubrac.Length when closed: 12 cm
Laguiole en Aubrac Juniper 12cm
€158.00
Laguiole en Aubrac 12 cm juniper
Handle material: juniper
Liner and bolsters made of stainless steel
Blade steel of stainless 12C27
Laguiole en Aubrac.Length when closed: 12 cm
Nesmuk Soul Folder Burl birch black
€550.00
Nesmuk Soul Folder burl birch black
elegant kitchen folder with unique burl birch
blade made of high performance niob-steel
very finely ground
Gourmets Carry Knives
In the development of their folding knife series Nesmuk have taken their time. A whole 4 years of tireless development went into these knives until the result met the high demands of the manufacturer. The goal was to create a folding knife that is completely without visible hardware but still meets the modern standards of the knife world. To achieve truly absolute perfection, Nesmuk folders must only be built by trained goldsmiths. All components must be adjusted and fitted to the hundredth of a millimeter - there are no tolerances for gaps here. The handle scales made of black burl birch are very cleanly ground.
The blades of the Janus series are provided with a black, highly polished DLC coating. Nesmuk's typical niobium steel, hardened to approx. 60 HRC, is also used here. The wedge grind ensures the best cutting properties and the unique appearance of Nesmuk knives. Due to the very fine grind of the knives, the cutting performance of the Nesmuk folding knives is absolutely impressive. With only 0.4mm of material behind the cutting bevel, it is fair to say that this is a true cutting devil.
With a holding force of 6 Newton, the Slipjoint spring ensures a secure lock without locking the blade, so that the Nesmuk Folder can be used without any problems - for example, in a restaurant. But not only in contact with food is the great strength of the Nesmuk Folder - here you get a completely made in Germany and incredibly well finished all-round pocket knife.
Laguiole en Aubrac juniper 9cm
€105.00
Laguiole en Aubrac 9 cm juniper
Handle material: juniper
Liner and bolsters made of stainless steel
Blade steel of stainless 12C27
Smaller Laguiole en Aubrac.Length when closed: 9 cm
Perceval Le Thiers Amourette
€280.00
Atelier Perceval - Le Francais Damascus Ebony
The classic from France made by hand
Extremely thin ground
handle made from Amourette and blade is made from 14C28N
Besides the ever-popular Laguiole knife, Le Thiers is the second well-known knife design from France, although this design is much younger.
Thiers could basically be compared to the old Solingen in Germany. Nowhere in France are so many small and large blacksmiths as well as knifemakers located as in the tranquil town in the Auvergne. Of the nearly 12,000 inhabitants, no less than 5,000 people work for the 300 or so knife manufacturers in the region. To honor this tradition, the Le-Thier knife shape was invented, which may only be produced by the manufacturers of this town and is interpreted a little differently by each.
On the occasion of the 20th anniversary of the company in 2015, Perceval also has its own version of this modern classic in its program.
In direct comparison to the L08 or the Le Francais, it is noticeable that the Le Thiers is a little larger, curvier and more elegant. The liner lock closes the knife very cleanly and can be unlocked easily with one hand. Really great is the guilloche on the back of the knife, which we already know from the classic Laguiole knives. These here very modern executed decorations reinterpret the classic file work and still give the knife a traditional touch. The handle wood in this variant is made of Amourette - a wood that radiates an incredible warmth and is also very robust.
For the blade, Perceval use the Swedish 14C28N steel from Sandvik. Deep cryo treatment hardens the structure to about 59 HRC, and its high resistance to rust makes it well suited for use with food. As with all Perceval knives, the grinding is done on very slowly rotating grinding stones, which prevents the steel from overheating. The honing of the cutting bevel is traditionally done on roughened buffalo hide.
So if you are looking for a more modern interpretation of this French knife classic, we highly recommend the Perceval Le Thiers.
Please note, each knife is unique and differs from the knives shown in the picture, because the selected materials are natural materials.
Spyderco Para Military 2 Maxamet
€290.00
€384.00
(24.48% saved)
Spyderco Para Military 2 Maxamet
Maxamet version
Gray G10 Scales
Made in Golden/Colorado/USA/Earth
The EDC Classic
Don't be put off by the name of this absolute classic - this is no combat knife or any other kind of military stabbing weapon. The Para Military 2 - or PM2 - is one of the most popular and versatile knives Spyderco has in its lineup. Originally introduced in 2010, this all-around knife has been improved upon over the years, making this cutting tool an absolutely mature design by now.
The incredibly ergonomically shaped handle, is designed for maximum control when working with the knife and allows a variety of ways to guide the blade.
Really great is the fingerchoil (an indentation at the base of the blade), which makes it possible to grip the knife very close to the cutting edge to transmit maximum force to the cutting movement. Thanks to the attached filing (jimping), you have an absolutely secure grip even in this position and the knife never threatens to slip away thanks to the gray G10 surface of the handle.
The steel plates are recessed into the handle material and generously milled out to save weight. An absolute highlight of the PM2s is the Compression Lock. At first glance, this locking technology looks like a liner lock placed at the rear - but a closer look reveals that it is not. With Compression Lock, the liner moves between the blade root and the back stop pin. To destroy this lock, the steel liner would have to be squashed between the blade root and the pin, which is virtually impossible. This construction makes the Para Military 2 one of the most stable pocket knives on the market.
In this version of the knife, the blade is made of the rather unusual Maxamet steel. This is a high-speed tool steel manufactured by Carpenter in the USA, which is not only impressively sharp thanks to its incredibly high carbon content, but also incredibly hard due to the composition of the alloy. Spyderco has a hardness of over 67 HRC, which is an incredibly high value in the pocket knife world. The result is a blade whose cutting edge has a very long service life and remains sharp for an amazingly long time. The fully raised flat grind ensures optimum cutting performance and the fine point allows even the finest detail work.
Thanks to the reversible pocket clip on both sides, the knife is ideal for both right- and left-handed users, while the large lanyard hole allows a safety strap to be attached.
CRKT Sketch Steel
€48.16
CRKT Sketch Steel
Compact EDC knife with pocket clip
Lucas Burnley-Design
Stainless steel handle and 8CR14MoV blade
Craftsman Knife
The CRKT Sketch is without question a real working knife. Inexpensive, very robust and insensitive. Nevertheless, the green elements like the pivot collar as well as the backspacer in matching color provide some optical highlights. In addition, there is a really hot design from the pen of none other than Lucas Burnley.
For the best possible price/performance ratio in combination with a very stable construction, CRKT chose a stainless steel Framelock construction for the Sketch. The non-convertible deep-carry clip lets the knife disappear discreetly into the pocket - no matter if jeans or work trousers.
Thanks to the alloy, the blade made of 18Cr14MoV is extremely rust resistant and at the same time easy to re-sharpen. The knife is opened via an elongated thumb hole, which ensures effortless, one-handed operation of the CRKT Sketch.
If you are looking for an inexpensive working knife that still has a unique look, the Sketch is the right choice.
Opinel with leather strap No7 different colors
€12.50
Color:
Pink
Opinel with leather strap No7 different colors
classic pocket knife with sturdy beech wood handle
secure Virobloc closure
handle size corresponds to size No7
Variants from €11.90
Case CopperLock Rough Black Synthetic Jig
€75.00
Case CopperLock Rough Black Synthetic Jig
classic pocket knife with Wharncliffe Blade
made in the USA
Sharp stainless steel blade
A piece of history
The Case Knives Copperlock is available here in a very special version. This special feature clearly lies in the handle material used: at the beginning of the 1940s, many raw materials, but also entire supply chains were needed in the USA for the production of armaments as well as other war-related products. The demand for every conceivable raw material was so great that many industries suddenly had a problem: there was often simply a lack of material for production because it was needed elsewhere. Of course, this phenomenon did not stop at Case Knives. Producing handle scales suddenly became a problem. The company's clever engineers, however, did not sit back and wait to see what would happen - instead, they developed an incredibly robust, easy-to-produce plastic called "Gum Fuddy". With the Rough Black series, Case Knives commemorates this chapter in their history.
The Blade:
Besides the handle material, the blade is clearly the star of the show: a very long drawn Wharncliff blade is used here, which ends in a really needle-fine point. This means that even the finest cutting tasks are no problem. The used Tru-Sharp-Stainless-Steel was mirror-polished and is therefore quite insensitive to rust. You can open the blade via a long pull, which offers you sufficient grip.
The handle:
Just like the "Gum Fuddy" originals, the Rough Black material has been provided with a kind of jig pattern, which not only ensures a solid hand position, but is also reminiscent of the bone handles of the classic Case knives. The very universal handle shape ensures that the Copperlock Rough Black fits securely in the hand, while the two pairs of nickel silver bolsters provide a quality feel. Due to the slightly indicated finger guard, this knife offers you a good finger protection, so that you can not accidentally slip into the cutting edge. The blade is locked in the open state via the typical Case midlock, which locks the knife cleanly and securely.
Nesmuk Janus Slicer bog oak 26 cm
€540.00
Nesmuk Janus Slicer bog oak
elegant kitchen knife with beautiful bog oak handle
Blade of high performance niobium steel
sehr fein ausgeschliffen
Technical specs
Blade length:
26 cm
Blade material:
niobium steel
handle material:
bog oak
dishwasher safe:
no
Bose Tear Drop Old Red Bone Smooth PVD Coated Blade
€110.00
Case Bose Tear Drop Old Red Bone Smooth PVDCoated Blade
elegant classic pocket knife with PVD coated blade
made in the USA
Polished red bone handle and Tru-Sharp stainless steel blade
Case Knives have integrated another gentleman's knife into the Red Bone series with the Tear Drop Pattern. This rather elegant and compact pocket knife stands out on the one hand for its tear-drop shaped handle and on the other hand for its comparatively short Spearpoint blade.
The blade:
In this single blade knife, Case Knives use their universal Spearpoint blade, which is not unlike those of Swiss Army Knives. In relation to the handle, the blade is apparently quite short, which gives the knife a rather elegant appearance. A real eye-catcher is the black PVD coated blade, which has been polished to a high shine.
The handle:
An interesting feature of this knife is that the front bolsters have been shaped so that the blade root almost completely disappears into the hilt. This gives a nice continuous line even when closed. The rear bolsters taper to a point, which gives the handle shape a nice finish. The handle material used here is red colored bone, which together with the polished bolsters and the blackened blade leaves a very overall impression.
Otter Mercator brass with Clip
€77.00
Blade material:
rustproof steel 1.4034
Otter Mercator brass with clip
classic pocket knife with noble brass handle
secure Back-Lock
with trouser pocket clip
Opinel Kitchenknife-set 4 pieces Olivewood
€39.95
Opinel Kitchenknife-set 4 pieces Olivewood
4-piece kitchen knife set
with beautiful olive wood handle
Consists of:
Vegetable knife straight
Vegetable knife bent
Utility knife
Economy peeler
Technical specs
blade material:
stainless steel
handle material:
Olivewood
Dishwasher safe:
No
blade finish:
not coated
Daily Knives AK1 Reverse Tanto Magnacut 2-Tone
From
€175.00*
Blade finish:
2-Tone
Blade for the Böker Daily Knives AK1
Blade shape Reverse Tanto
Blade steel Magnacut
Compared to the classic Drop Point blade shape, the grind lines and shape of the Reverse Tanto blade give the knife a more tactical, military look.
The AK1 Reverse Tanto from CPM Magnacut™ can be used for rougher work in the forest, also cuts very well in the kitchen and will never let you down in your everyday life.
Choose between a satin or stonewash finish. The stonewash is particularly popular because most traces of use blend seamlessly into the surface structure, even after intensive use there are few signs of wear and tear.
Daily Knives AK1 Drop Point RWL34 Stonewashed
€150.00
Blade finish:
Stonewashed
Böker Daily Knives AK1 Drop Point Blade
Blade for the Böker Daily Knives AK1
Blade shape Drop Point
Blade steel RWL34
The Drop Point blade shape is one of the long-standing classics of the knife industry. Its unobtrusive appearance, robust tip and excellent handling make the blade shape particularly popular for EDC and household knives.
The AK1 Reverse Tanto from RWL34™ can be used for rougher work in the forest, also cuts very well in the kitchen and will never let you down in your everyday life.
Choose between a satin or stonewash finish. The stonewash is particularly popular because most traces of use blend seamlessly into the surface structure, even after intensive use there are few signs of wear and tear.
Victorinox Handyman
€79.00
Victorinox Handyman
the toolbox for the office
with integrated pliers
tool list:
large blade
small blade
can opener
screwdriver 3 mm
bottle opener
screwdriver 6 mm
wire stripper
Reamer
Corkscrew
Scissors
Combination pliers
Wire cutter
Sleeve crimper
Wood saw
Nail file
Nail cleaner
Metal saw
Metal file
Screwdriver 2.5 mm
Wood chisel 4 mm
Multipurpose hook
Toothpick
Tweezers
Ring
Technical data
Total length:
16,3 cm
Blade length:
7 cm
Blade thickness:
2,6 mm
Weight:
155 g
Blade material:
stainless
Handle material:
plastic
Opening aid:
Nail cut
Opening:
Manual
Closure:
Slipjoint
Color:
Red
Blade color:
Uncoated
Nesmuk Janus chef's knife 14cm olive
€520.00
Nesmuk Janus chef's knife 14cm olive
elegant chef's knife with beautiful olive wood handle
Blade made of high performance niobium steel
Very finely ground
Technical data:
Blade length:
140 cm
Blade material:
Niobium steel
Blade material:
Olive wood
Dishwasher safe:
No
Nesmuk Janus chef's knife olive
€560.00
Nesmuk Janus Chef's Knife Olive
elegant chef's knife with elegant olive wood handle
Blade made of high performance niobium steel
Very finely ground
Technical data:
Blade length:
180 cm
Blade material:
Niobium steel
Handle material:
Olive
Dishwasher safe:
No
Nesmuk Janus Slicer bog oak
€510.00
Nesmuk Janus Slicer bog oak
elegant kitchen knife with beautiful bog oak handle
blade made of high-performance niobium steel
Very finely ground
Technical data:
Blade length:
16 cm
Blade material:
Niobium steel
Handle material:
Bog oak
Dishwasher safe:
No