Null Knives Voodoo Titanium handle with micarta or carbon fiber scales Sheepfoot blade Blade made of M390 with Acidwashed, Stonewashed or Hand Rubbed Satin Finish
Lucas Burnley design Stainless steel handle with black stonewashed finish DropPoint blade made from Magnacut with stonewashed finishhandmade in Solingen
Chris Reeve Sebenza 31 Left Handed
Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut
When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model..
First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye.
Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar..
To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series..
Small or Large?
Just like its predecessor, both sizes are still available.
While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form.
Please note:The photos are of the Large version in each case..
Chris Reeve Sebenza 31 Box Elder Lefthanded
Lefthand Version of the Sebenza 31available in Large or Small
Wood inlay on the front and back
Clip sits slightly diagonal on the 31
Chris Reeve Sebenza 31 Bok Oak Lefthanded
Lefthand Version of the Sebenza 31available in Large or Small
Wood inlay on the front and back
Clip sits slightly diagonal on the 31
Chris Ortiz DesignS90V Steel Highend Slipjoint Folder Titanium bolster
1st tube You will receive the knife in a tin. Each tin has a drawing to match the knife. Ben was able to win over Marvel artist Sean Tiffany for this. 2nd microfiber cloth the color of the microfiber cloths change depending on the pattern of the knife. Also ingenious, right? 3. stickers and plates Also designed by Sean Tiffany All Jack Wolf Knives are produced in small runs. This means that as soon as it is sold out, it won't be back for a while.
Chris Ortiz DesignS90V Steel Highend Slipjoint Folder Titanium bolster
1st tube You will receive the knife in a tin. Each tin has a drawing to match the knife. Ben was able to win over Marvel artist Sean Tiffany for this. 2nd microfiber cloth the color of the microfiber cloths change depending on the pattern of the knife. Also ingenious, right? 3. stickers and plates Also designed by Sean Tiffany All Jack Wolf Knives are produced in small runs. This means that as soon as it is sold out, it won't be back for a while.
Chris Ortiz DesignS90V Steel Highend Slipjoint Folder Titanium bolster
1st tube You will receive the knife in a tin. Each tin has a drawing to match the knife. Ben was able to win over Marvel artist Sean Tiffany for this. 2nd microfiber cloth the color of the microfiber cloths change depending on the pattern of the knife. Also ingenious, right? 3. stickers and plates Also designed by Sean Tiffany All Jack Wolf Knives are produced in small runs. This means that as soon as it is sold out, it won't be back for a while.
Chris Ortiz DesignS90V Steel Highend Slipjoint Folder Titanium bolster
1st tube You will receive the knife in a tin. Each tin has a drawing to match the knife. Ben was able to win over Marvel artist Sean Tiffany for this. 2nd microfiber cloth the color of the microfiber cloths change depending on the pattern of the knife. Also ingenious, right? 3. stickers and plates Also designed by Sean Tiffany All Jack Wolf Knives are produced in small runs. This means that as soon as it is sold out, it won't be back for a while.
Perfect balance of compact size, low weight, permissible blade size and comprehensive cutting performance Handle made from brown G10CPM15V blade with Shawn Houston's ‘Triple B’ logo engraved on the bladeThe MicroJimbo is everything you know and love about the large Yojimbo - only more compact and reduced to the essentials. The striking Wharncliffe blade is housed in a robust handle made of brown G-10 and delivers precise cuts whenever you need them.
Thanks to the easy-grip design, the secure compression lock and the clip that can be mounted on both sides, the knife is not only handy, but also absolutely suitable for everyday use. The brown color of the G10 may have already given it away: this is a Sprint Run with a CPM 15V blade. So if the regular Yojimbo has been a bit "too much" for you so far, this little spike could be an option.
Spydified version of the Lionsteel Skinny Titanium full integral with Dark Matter Polar Fat Carbon inlay Dismountable flipper tip Reeve Integral Lock (R.I.L.) M390 blade steel Convertible clip
Button-Release Compression Lock CPM S90V Blade Steel Carbon Fiber/G-10 Laminate Scales Convertible ClipThe Sage series has also had a new addition. The Sage series is basically pure Spydy: a super cool design that introduces different locking systems. Now the Sage 6 comes with Button-Release Compression Lock®, the newest lock member of the family. The button on the front allows the blade to be unlocked with ease - more fidget factor deluxe .
This Sprint Run version features a blade made of CPM S90V, known for its extreme edge retention and resistance to wear. In addition, there are grippy scales made of Carbon Fiber/G-10, which not only look super classy, but also offer real grip. With the combination of the tried-and-tested compression lock and the new button, the knife is not only a cool addition to the Sage family but also an all-round carefree EDC knife
The Knife for Pirates with Style (and Good Taste)
Clean looks, solid build, zero bullshit. The Purser, built by Bestech, is your reliable everyday sidekick – whether you’re hunting treasure or just picking up the best pizza in town.
Rides on ceramic bearings – flips like a dream.
Three Versions – No Gimmicks, Just Solid Choices:
Natural Micarta & 14C28N
Grippy, uncoated natural Micarta up front, dark stonewashed titanium on the back – lightweight, solid, and straight to the point.
Blade steel: 14C28N – low maintenance, corrosion-resistant, and a real slicer.
Limited to 200 pieces.
Full Titanium & Magnacut
Titanium all around, dark stonewashed and ready for whatever comes your way.
Magnacut offers top-tier performance when it comes to edge retention, toughness, and corrosion resistance.
Limited to 200 pieces.
Limited Edition: Black Micarta & Magnacut – KnifeLounge Exclusive
Just 60 pieces worldwide – individually numbered blades and our KnifeLounge logo as the cherry on top.
Black Micarta meets titanium back and Magnacut steel – clean, rare, and highly collectible.
Specs:
• Titanium hardware (screws, backspacer, clip) – all dark stonewashed
• OEM: Bestech
• Bearings: Ceramic – smooth, fast, and addictive
The Knife for Pirates with Style (and Good Taste)
Clean looks, solid build, zero bullshit. The Purser, built by Bestech, is your reliable everyday sidekick – whether you’re hunting treasure or just picking up the best pizza in town.
Rides on ceramic bearings – flips like a dream.
Three Versions – No Gimmicks, Just Solid Choices:
Natural Micarta & 14C28N
Grippy, uncoated natural Micarta up front, dark stonewashed titanium on the back – lightweight, solid, and straight to the point.
Blade steel: 14C28N – low maintenance, corrosion-resistant, and a real slicer.
Limited to 200 pieces.
Full Titanium & Magnacut
Titanium all around, dark stonewashed and ready for whatever comes your way.
Magnacut offers top-tier performance when it comes to edge retention, toughness, and corrosion resistance.
Limited to 200 pieces.
Limited Edition: Black Micarta & Magnacut – KnifeLounge Exclusive
Just 60 pieces worldwide – individually numbered blades and our KnifeLounge logo as the cherry on top.
Black Micarta meets titanium back and Magnacut steel – clean, rare, and highly collectible.
Specs:
• Titanium hardware (screws, backspacer, clip) – all dark stonewashed
• OEM: Bestech
• Bearings: Ceramic – smooth, fast, and addictive
