Buy Everday Carry at Knife Lounge

Böker Plus Redox Pen  because of the Ethergraf tip the Redox Pen works completely without ink and graphite abrasion writes even under the most adverse circumstances titanium handle with pocket clip It's a kind of magic A pen without refill. Without ink. Without graphite. What sounds strange at first glance is in fact an ancient technique that has been used by the greatest artists and thinkers. Due to the lightning-fast oxide send on the ethergraf tip of the redox pen, the pen can write completely without any refill. The body of the Redox Pen is made of robust but very light titanium and is equipped with a clip. The tip of this Ethergraf pen is made by the Italian writing instrument specialist Napkin for Böker. With the Redox Pen you can write wonderfully without the risk of dirtying your hands or clothes. The writing is also document proof because it cannot be erased.  The modern and simple design of this pen makes the Redox Pen a great addition to any EDC set. Not everyone has such a pen!   Technical specs  total length: 13,1 cm  material: titanium und ethergraf with: pocketclip and ethergraf-Tip

Chris Reeve Sticker Pack 4 Chris Reeve stickers perfect to upgrade the knifecase or your toolbox long color fastness

Lynch All Access Pass V1.5 sturdy EDC Prybar and bottle opener made of titanium with Lynch Deepcarry clip   Goldstandert in the world of bottle openers   Casey Lynch has created some serious hype in the gear and knife community with the All Access Pass Prybars. Hard to get and extremely popular! These handy pocket-sized pry bars are not only great for prying, screwing, scraping and anything else a knife blade is too delicate for. Also beer and of course all other drinks with crown caps can be opened with the cap lifter with ease. Completely milled from one piece of the highest quality 6AL-4V titanium and the typical Lynch Deep Carry Clip. All Lynch tools are indidually hand finished. 100% Made in America     Technical Specifications:  Total length: 10,17 cm  Total width: 2,29 cm Material: 6AL-4V Titanium Finish: Sandwashed or Stonewashed Logo Fade Anodized

Böker Plus K.I.D. cal .50  sturdy ballpoint pen in a good pocket size with bolt action bayonet mechanism with pocket clip   EDC classic from Böker The Böker Plus K.I.D. cal .50 is the compact version of the popular CID cal .40! Not only due to its slightly more compact dimensions, this pen has become one of the most popular Every Day Carry pens of recent years. Slightly shorter, but minimally thicker, the cal. 50 offers an excellent handle position. Due to the rather classic clip, it can also be stowed very comfortably in the pockets of yor pants. The ingenious bolt action bayonet mechanism provides a pleasant mechanical feedback and also delivers that certain fidget and play factor - which makes this pen something very special. The K.I.D. cal .50 is offered in a variety of materials that carry a very different character. Brass is relatively heavy, feels pleasantly substantial, and develops a beautiful patina over time. Titanium appears very elegant, light, sturdy and always a popular premium option in the EDC community. Aluminum is also very light, offers all the advantages of the design, but is clearly easy on the wallet. Refill standard: Large capacity refills ISO 12757-2    Technical specifications Total length: 11,2 cm  Material: aluminium, brass or titanium Includes clip and bayonet mechanism

Böker Plus K.I.D. cal .50  sturdy ballpoint pen in a good pocket size with bolt action bayonet mechanism with pocket clip   EDC classic from Böker The Böker Plus K.I.D. cal .50 is the compact version of the popular CID cal .40! Not only due to its slightly more compact dimensions, this pen has become one of the most popular Every Day Carry pens of recent years. Slightly shorter, but minimally thicker, the cal. 50 offers an excellent handle position. Due to the rather classic clip, it can also be stowed very comfortably in the pockets of yor pants. The ingenious bolt action bayonet mechanism provides a pleasant mechanical feedback and also delivers that certain fidget and play factor - which makes this pen something very special. The K.I.D. cal .50 is offered in a variety of materials that carry a very different character. Brass is relatively heavy, feels pleasantly substantial, and develops a beautiful patina over time. Titanium appears very elegant, light, sturdy and always a popular premium option in the EDC community. Aluminum is also very light, offers all the advantages of the design, but is clearly easy on the wallet. Refill standard: Large capacity refills ISO 12757-2    Technical specifications Total length: 11,2 cm  Material: aluminium, brass or titanium Includes clip and bayonet mechanism

Böker Plus K.I.D. cal .50  sturdy ballpoint pen in a good pocket size with bolt action bayonet mechanism with pocket clip   EDC classic from Böker The Böker Plus K.I.D. cal .50 is the compact version of the popular CID cal .40! Not only due to its slightly more compact dimensions, this pen has become one of the most popular Every Day Carry pens of recent years. Slightly shorter, but minimally thicker, the cal. 50 offers an excellent handle position. Due to the rather classic clip, it can also be stowed very comfortably in the pockets of yor pants. The ingenious bolt action bayonet mechanism provides a pleasant mechanical feedback and also delivers that certain fidget and play factor - which makes this pen something very special. The K.I.D. cal .50 is offered in a variety of materials that carry a very different character. Brass is relatively heavy, feels pleasantly substantial, and develops a beautiful patina over time. Titanium appears very elegant, light, sturdy and always a popular premium option in the EDC community. Aluminum is also very light, offers all the advantages of the design, but is clearly easy on the wallet. Refill standard: Large capacity refills ISO 12757-2    Technical specifications Total length: 11,2 cm  Material: aluminium, brass or titanium Includes clip and bayonet mechanism

Trayvax Axis Wallet Tough as nails Very slim Bifold construction Slim and smart Even if you are more into a modern look without leather, you will find it at Trayvax. The Axis model is without question one of the most modern wallets that the manufacturer has in its portfolio. Unlike many other models of the manufacturer, the Axis is not a simple cardholder but a bifold wallet.  The basic construction consists of two coated metal plates, which are connected by a nylon loop. Thanks to a small eyelet and a hook, this loop also serves as a clasp. The upper part of the Axis Wallet is equipped with a small money clip, so that you have immediate access to your banknotes when you open it. In addition, you will find a small hole, to which you can attach a lanyard or the Trayvax Link. On the other side of the Axis you will find a cardholder, where the cards are placed in a small pocket made of elastic nylon. Woven into this pocket is a small compartment where you can store a key, for example. The back of the Axis Wallet is equipped with a large viewing window, so you can see your ID card or your subway ticket. Thanks to the flat design you can carry your Trayvax Axis Wallet comfortably in your front pocket, so you don't have to worry about losing it. Of course, this cardholder is also equipped with RFID protection, so that no one can read the data of your cards. Technical specifications: Material: Aircraft grade aluminum and stainless steel Room for: up to 15 cards and 1-5 bills Includes: bottle opener, money clip, pry bar RFID protection: Yes Dimensions: 10,5 cm x 6,7 cm x 1,2 cm Weight: 68 g

Trayvax Climb-Spec Nylon Practical keychain carabiner With quick release swivel Made of durable Climb-Spec Nylon metal with melonite finish   Secure and fast! Sometimes you just like to have a little more security. Especially in crowded places, it's nice to have your wallet or keychain well secured and yet always have it ready for quick access. Trayvax offer an surprisingly simple but nonetheless ingenious solution. With the Link, your wallet can be easily attached to the belt loop of the pants or your belt with a small carabiner. On the other side there is a quick release swivel that can be opened with a light pressure on the easy access button. This way you can remove your Trayvax Wallet or keys with just one fast motion and still don't have to worry about losing anything or even being robbed. Hook and swivel are connected by a loop made of extremely strong yet lightweight climb-spec nylon. Like all Trayvax products, the Link is completely made in the USA.     Technical specifications: Material: Climb-Spec Nylon and metal Mit:  Quick release swivel

Trayvax Link Leather  Practical keychain carabiner With quick release swivel Tanned leather and metal with melonite finish   Secure and fast! Sometimes you just like to have a little more security. Especially in crowded places, it's nice to have your wallet or keychain well secured and yet always have it ready for quick access. Trayvax offer an surprisingly simple but nonetheless ingenious solution. With the Link, your wallet can be easily attached to the belt loop of the pants or your belt with a small carabiner. On the other side there is a quick release swivel that can be opened with a light pressure on the easy access button. This way you can remove your Trayvax Wallet or keys with just one fast motion and still don't have to worry about losing anything or even being robbed. Hook and swivel are connected by a loop of tanned leather. Like all Trayvax products, the Link is completely made in the USA.     Technical specifications: Material: Leather and metal Mit:  Quick release swivel Leder: Split leather

Voxnaes Sulky Seahorse  6 mm Titanium Multi Anodized Custom designed and machined by Jesper Voxnaes Titanium 10 mm thickness Multi anodizes for an exceptional color finish With stamped markings   Beerhorse Sulky Seahorse is one of four animals in our Voxnaes custom bottle opener selection. And like all his conspecifics its kind of a rare catch! The Seahorse was given a multive anodization to create a exceptional color finish. The quantities are very limited and worldwide these extraordinary bottle openers are very hard to obtain. The VoxDesign pocket tools are really something out of the ordinary. Somehow cute, extremely stylisch but at the same time primal and raw. And certainly not for every taste. Nevertheless an enormous fascination comes from these little worry stones. For collectors and Jasper Voxnaes fans these bottle openers are the ultimate accessory in the gentleman carry. Jasper Voxnaes himself makes the tools in his workshop in Denmark. Please note: Due to the high demand we limit the orders to one piece per customer.     Technical specifications: Dimensions: approx. 7,5 cm x 3,2 cm Thickness approx. 6 mm Weight: 26 grams Material: Titanium

Voxnaes Fat Snailor 12 mm Brass Custom designed and machined by Jesper Voxnaes Brass 12 mm thick  1 of 2 worldwide With stamped markings and HOLY FUCK inscription   Double The Size, Double The Fun! Snailor is one of four animals in our Voxnaes custom bottle opener selection. And like all his conspecifics a kind of a rare catch! Iconic snail shape in a whooping 12 mm thick brass. The quantities are very limited and worldwide these extraordinary bottle openers are very hard to obtain. The VoxDesign pocket tools are really something out of the ordinary. Somehow cute, extremely stylisch but at the same time primal and raw. And certainly not for every taste. Nevertheless an enormous fascination comes from these little worry stones. For collectors and Jasper Voxnaes fans these bottle openers are the ultimate accessory in the gentleman carry. Jasper Voxnaes himself makes the tools in his workshop in Denmark. Please note: Due to the high demand we limit the orders to one piece per customer.     Technical specifications: Dimensions: approx. 7,1 cm x 3,3 cm Thickness approx. 12 mm Weight: 92 grams Material: Brass

The tiny one made from solid titanium very compact Pilot G2 Mini refill While the Parker and normal G2 versions are full-blown EDC pens, the Pilot G2 Mini TIclicker is an amazingly compact pen that can be slipped into your pocket without adding any significant bulk due to its short length or low weight. The length of the pen is - in contrast to many other mini pens - chosen so that you still have an excellent hand position and even long texts go effortlessly from the hand. The refill used is the Pilot G2 Mini, which is essentially a compact version of the large G2 cartridge. Thanks to its diameter, this refill is still able to store a large amount of gel ink despite its short length. Here you get an ideal compromise between short length and high practicality.

JRW Gear Curator BeadCurator bead made of flexible PVDSet of 2 beadsDiameter approx. 1.8 cm

JRW Gear Curator BeadCurator bead made of flexible PVDSet of 2 beadsDiameter approx. 1.8 cm

Chaves Knives Patch SetSet bestehend aus zwei PVC Patches mit Klettrückseite:schwarzes Skull Logo auf schwarzem HintergrundRotes Skull Logo auf schwarzem HintergrundAbmessung: Durchmesser ca. 5 cm

can be telescoped in length (for refills of different sizes) Pen made of titanium grade 5 clip made of titanium grade 4 available in Titanium Stonewashed finish Titanium Antique black Titanium RawZirconiumBrassCopper Dimensions: 10.5cm to 11.8cm Long 17g heavy 9,7mm body diameter 11,6mm handle diameter Compatible refills for your Ti Pocket Pro Variable size adjustment allows more than 80 refills to fit in your pen.For a listing of matching RollerBall (rollerball) refills and Parker refills can be found at the Downloads tab. How does it work? You turn the grip and the refill extends to your desired length. By turning the grip in the opposite direction, the refill retracts. A Parker lead is already inserted in your Ti Pocket Pro. If you want to insert a rollerball refill, turn the spring inside the pen. The nib is slightly narrower at one end and slightly wider at the other:Narrow end - on your Parke refillWide end - on your rollerball refill. What is in the box? Ti Pocket Pro with one Schneider refill Gel (0,4) Black

Limited Edition Front: Number from 100 & lettering “Celebrating the Past, Embracing the Future 2025” Back: Jubilee X logo Made from titanium Dimensions: Width: 59.7 mm Height: 55.2 mm Thickness: 9.5 mm Weight: 63 g Made in the USA

Limited Edition Front: Number of 100 & lettering “Celebrating the Past, Embracing the Future 2025” Back: Mouse head logo of the Shank Sharpeners Union Made of brass Dimensions: Width: 59.7 mm Height: 55.2 mm Thickness: 9.5 mm Weight: 120 g Made in the USA

Anso of Denmark MiniBar with Inlay Perfect for the key ring or as a small pocket tool made of titanium made in Denmark by Jens Anso Small pry bar and bottle opener for your EDC.  Prying is something you really shouldn't do with a knife. Sure: a really sturdy survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Recently, small pry tools have become increasingly popular in the EDC scene - Jens Ansø also has a corresponding tool in his portfolio with the Prybar12. But if this is still too big for you, you are welcome to use the Minibar. No, not THE minibar at a hotel, but the new keychain tool from Ansø. This very handy pry tool is also a cap lifter and is of course manufactured entirely in Jens Ansø's workshop in Denmark. The 5mm thick titanium is first blasted, then stonewashed and finally color anodized. To match, there is a variety of inlays, which can be changed as desired thanks to the screw connection.   Technical Data: Length 50 mm Width 23 mm Thicknes 5 mm Material Titanium

Combat Beads Dead Sergeant Premium Ranger Eye Patch Ranger Eye Patch Metal casting Hook Velcro on the back Made in Canada Dimension: 2.7 cm x 2.7 cm1.0626" x 1.0626"

Combat Beads Dead Sergeant Bead Metal casting Beads Made in Canada Dimension: 2.7 cm tall1.0625" tall

GiantMouse Caplifter / Prybar Titanium Keychain by adding a split ring Bottle opener Specifications : Material: Titanium Thickness: 3/16" (4.8 mm) Length: 3.07" (78 mm) Width: 1.3" (33 mm) Weight: 0.9 oz (25.5 g)

Daily Knives Prybar PryAK Inlay Ti Prybar from Daily Knives perfect for your AK 1 Micarta inlay interchangeable Prybar made of titanium Daily Knives have done it: the first EDC Prybar from Hamburg is here. The PrybAK is a design by Alex Kremer, who has already designed the AK1 knife. As always, the PrybAK is completely milled from titanium, assembled and packaged in Hamburg. The canvas micarta inlay is screwed and can be changed by you according to your taste. The highlight: you can switch between different inlays that are also compatible with your AK1 knife. In addition, you have thanks to the lanyard eyelet to attach a bead of your wall. Dimensions: Length 10.6 cmwidth 1,50 cmheight 0,6 cm

Anso Prybar12 Titanium Kobolt Finish With Orange G10 Inlay  pocket pry bar and bottle opener made of titanium Kobolt finish orange g10 inlay It´s twelve o'clock in New Zealand... Prying is something you really shouldn't do with a knife. Sure: a really sturdy full tang survival blade might take such a beating without any complaint. But espacially folding knives with thinner blade stock are less forgiving and might break on you. Therefore, small pry tools have recently become more and more popular in the EDC community. Now there is also is such a mini pry bar from Jens Ansø. With its 10 cm the Prybar12 is still compact enough that it could still be attached to the keychain without bothering the user. Those who prefer to carry the Prybar12 in their pocket can do so with the integral pocket clip. Like all Ansø tools, the Prybar12 is completely manufactured in his workshop in Denmark. The titanium is first blasted, then stonewashed and finally color anodized. By the way, the name of this tool alludes to the saying that its 12 o'clock somewhere in the world right now! Cheers!   Technical specifications: Length:  97 mm Width: 26 mm Thickness:   5 mm Weight: approx 37 g Material: titanium Finish: Kobolt Inlay: G10, orange