New – Discover the Latest Knives & EDC Products

2x Penblades for the Fellhoelter CrafTiBolt

Sebenza 31 Available in Large or SmallReeve Integral Lock with ceramic ball on lockbarBlade Steel: Magnacut Clip Design: Off-set (on the 31, the clip now sits diagonally rather than straight) When in June 2019 the end of the Sebenza 21 was proclaimed and with the Sebenza 31 the successor was presented, this message went like a drumbeat through the knife scene. Finally, new introductions of the manufacturer from Idaho are already very rare. If it is then still about the heritage of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model.. First, it is noticeable that the hole on the presentation side of the knife is now omitted - something that many Reeve fans have long wished for. The slightly altered angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a range that can hardly be measured, preventing long-term wear at the contact point of the lockbar.. To improve the hand position of the Sebenza once again a little, the recessed grip on the front was ground a little differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can effortlessly tie in with the popular 21 series.. Small or Large? Just like its predecessor, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand placement continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form.  Please note:The photos are of the Large version in each case..

Sebenza 31 with Natural Micarta Inlay available in Large (S35VN) or Small (S45VN) Micarta inlay on the front and back Clip sits slightly diagonal on the 31 Of course, in addition to the "Plane Jane", the Sebenza 31 is again available in a model with inlays. Two versions are currently available, one with Black Canvas Micarta and the variant presented here in Natural Micarta. While the rear Micarta inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Micarta inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Body Screw Chris Reeve Lanyard classic for Sabenza and Umnumzaan Lanyard Pin

Chris Reeve Sebenza 31 Canvas Micarta black available in Large or Small Micarta inlay on the front and back Clip sits slightly diagonal on the 31 Ceramic Ball Detent Of course there is also a model with inlays for the Sebenza 31 besides the "Plane Jane". Two versions are currently available, one with Natural Canvas Micarta and the variant presented here in Black Micarta. While the rear Micarta inlay is more oriented to the inlays of the Inkosis in terms of shape, a new design was chosen for the show side. Instead of having two inlays as before, now one large one was used, which describes a wide arc over the handle of the knife. As is customary with CRK, the inlays on the Sebenza 31 are bonded in such a way that they last virtually forever. In addition to the visual difference, the Micarta inlays also provide a somewhat fuller and rounder hand position, which should be interesting especially for use with gloves. Large When the end of the Sebenza 21 was proclaimed in June 2019 and the successor, the Sebenza 31, was presented, this announcement went through the knife scene like a drumbeat. After all, new introductions from the manufacturer from Idaho are already very rare. When it comes to the inheritance of one of the most famous and best pocket knives of all time, such a thing does not remain without appropriate reaction. Fortunately, Chris Reeve Knives have improved their recipe for success all in all only minimally but in crucial places, so that one can justifiably continue to speak of a Sebenza in the new 31 model. First of all, the hole on the presentation side of the knife is now gone - something that many Reeve fans have long wished for. The slightly changed angle of the pocket clip, which now no longer presses on the lockbar, is also quickly noticeable to the trained eye. Less obvious, however, is the revised lock of the Sebenza 31. Just as with the Umnumzaan or the Inkosi, a ceramic ball embedded in the lockbar now presses against the blade root. The hardness of this ball is in a barely measurable range, which prevents long-term wear at the contact point of the lockbar. In order to improve the hand position of the Sebenza a bit, the grip recess on the front side was ground a bit differently. All in all, we can say: yes, the new model rightly bears the venerable name Sebenza and can easily tie in with the popular 21 series. Small Just like the previous model, both sizes are still available. While the large Sebenza 31 is a truly full-blown work knife, the Small Sebenza remains the king of EDC pocket knives - the hand position continues to be great on the successor model. All of the features mentioned above can also be found in this smaller version of the Sebenza 31 - just in a slightly more compact and pocket-friendly form. Accessories: Chris Reeve Clip Insert and Screw Chris Reeve Backspacer Chris Reeve Body Screw Kit Chris Reeve Pocket Clip Chris Reeve Grease Chris Reeve Body Screw Chris Reeve Lanyard classic for Sabenza and Umnumzaan Lanyard Pin

Golden Legend. Black Heart. It wasn’t forged – it was discovered. Deep beneath ancient ruins. Sealed in a chamber, untouched by time and dust. The Crypt is no ordinary flipper. It’s an EDC that looks like an artifact – with gold-anodized titanium scales that gleam like the treasure of a forgotten king. But the real magic lies in the contrast: a black pivot collar, a matching black clip – dark accents drawn straight from a mechanical shadow. The Persian-style blade made from M390 isn’t just sharp – it’s symbolic. It represents precision, elegance – and maybe a hint of danger. The flipper tab deploys the blade with silky smoothness, and the inset liner lock holds it firmly in place – as if the knife itself knows it should never fall into the wrong hands. Highlights: Gold-anodized titanium handle scales – radiant like a relic from an ancient temple Black pivot collar & black clip – contrast that adds depth and darkness M390 Persian blade  Inset liner lock & caged bearing flipper – smooth mechanics from the depths below Crafted by Bestech – designed by Arcane Design Conclusion: If you’re looking for an EDC that blends into your day – look elsewhere. But if you’re after something that looks like legend – you’ve found it.

Sechsteiliges Zircuti Kit zum Upgraden deines Arcane Plexus4x Accent Bolster1x Showside Inlay1x Clip

Personalisiere dein Cypt mit schicken roten Achsbolstern

Bladeshow Special Ruby G10 Edition CPM 20CV Blade with PVD coatingRed G10 Showside ScaleTitanium FramelockTitanium Pivot Collars

Arcane The CreatureTitanium FrameLock with a CPM-20CV steel bladeThumb pins on both sides of the blade American Tanot or Dropppoint bladeThe "Arcane The Creature", is not only a tool, but also a work of art. Israel Baccus, the creative mind behind the design, took inspiration from one of his favorite horror movies, "The Creature from the Black Lagoon". You can tell by the blade laser engraving on the blade: the "Creature" head from the movie that was released back in 1954. The result? A unique knife that should not be missing in your collection! Let yourself be inspired by the choice: Tanto or Droppoint blade, paired with a smooth Satin finish or a tough Stonewash finish. Handling is a breeze! Thanks to the ball bearings, the blade glides on smoothly and quickly. You can open it with either the flippertap or thumb pins on either side. With a length of almost 21 cm, the knife also feels comfortable in large hands. It combines futuristic design with the highest quality - made by the experts at Reate Knives. .

The Raven EDC Case – Your Rolling Bank Vault for the 3 Musketeers of Your Everyday Carry They say the foundation of every great EDC is: Write, Light, Slice. That’s something the Raven creator believes so much, he even got it tattooed (“It’s not a phase, mom!”). Now, he’s taking it a step further with the ultimate protection for your essential gear. The Raven EDC Case isn’t just any pouch — it’s a rugged fortress for your essentials, crafted in collaboration with the pros at Guard Dog Inserts Canada and built on the legendary Nanuk Nano 330, also proudly Made in Canada. What makes it special? Bank-vault tough: Shock-absorbent, water-resistant, and dustproof. The tough polycarbonate shell guards what matters most, even in the harshest conditions. Smart interior: A custom insert holds your three EDC musketeers tight — one folding knife, one AAA flashlight, and a mid to large-sized pen. PowerClaw latch: More secure than your deepest secrets — this latch keeps the case locked tight even through heavy drops. Compact & versatile: Perfect for everyday use, your backpack, or your workspace — keeping your gear safe and ready to go. Dimensions: 28.2 cm x 19.4 cm x 10.7 cm (L x W x H) — plenty of room for your key EDC tools without bulk. Knife: 12.70 cm x 3.81 cm x 1.84 cm Flashlight: 10.54 cm x 1.52 cm x 1.84 cm Pen: 13.52 cm x 1.21 cm x 1.14 cm Please note: The case is sold without knife, pen, or flashlight. Whether your EDC is minimalist or fully loaded, the Raven Case is the reliable sidekick that treats your gear like family. Ready to protect what matters most?  Heads-up for our friends in the US and Canada: You can grab this case directly from GuardDog.

Vulpex Knives Design Titanium handel with  BeadBlasted or DLC FinishM398 Blade with Pearlescent Stonewash or Pearlescent DLC coatingThumbstud with Vulpex iconic copper insert

Vulpex Knives Design Titanium handel with  BeadBlasted or DLC FinishM398 Blade with Pearlescent Stonewash or Pearlescent DLC coatingThumbstud with Vulpex iconic copper insert

Vulpex Knives Design Titanium handel with Cristalyzed polished Finish M398 Blade with Pearlescent Mirror DLC coating Thumbstud with Vulpex iconic copper insert

Vulpex Knives Design Titanium handel with  BeadBlasted or DLC FinishM398 Blade with Pearlescent Stonewash or Pearlescent DLC coatingThumbstud with Vulpex iconic copper insert