Buy Everday Carry at Knife Lounge
Trayvax Contour Lite Wallet
€229.00
The Trayvax Contour Lite is pure EDC engineering — proudly
made in the USA from precision CNC-milled titanium
combined with oil-tanned leather that develops a rich patina over time.
No gimmicks, no bottle opener – just what you really need: a durable, slim wallet
built for everyday use.
Despite its compact size, the Contour Lite offers impressive capacity.
It securely holds up to 13 cards and around 10 bills,
all kept in place by an adjustable frame with Torx screws.
Tune it perfectly to your setup — from a minimalist 3-card carry to a full EDC loadout.
The titanium frame provides outstanding strength and reliable
RFID protection. Thanks to its slim profile
(approx. 9.7 × 6.1 × 1.3 cm / 3.8 × 2.4 × 0.5 in),
it fits comfortably in any front pocket without bulking up or bending.
Materials: Titanium frame, oil-tanned leather
Capacity: Up to 13 cards + around 10 bills
Made in: USA
Trayvax Original 2.0 Wallet
€62.00
Color:
WHEREUAT
Trayvax Original 2.0
The Trayvax Original 2.0 isn’t your typical wallet – it’s a minimalist EDC wallet built for those who appreciate rugged design, clever engineering, and uncompromising durability.
Made to last for decades. Designed and handcrafted in the USA.
Engineered Design
The wallet features a CNC-machined front plate made from anodized aluminum and a back plate made from stainless steel.
Both plates are connected with MIL-SPEC paracord, allowing you to fine-tune the tension.
Fewer cards? Tighten it up. More cards? Loosen it a bit.
Your wallet always stays as slim or as roomy as you need it to be.
Key Features
Integrated bottle opener and pry bar – handy for everyday use and outdoor adventures.
Rear money clip – holds up to five folded bills securely.
Locking strap with paracord tension – keeps your cards safely in place between the metal plates, even when things get rough.
ID window (thumb cutout) – gives you quick access to your most-used card.
Attachment point for lanyard or keychain – perfect for your EDC setup.
Partial RFID shielding – metal plates block signals and help protect your cards from unwanted scanning.
How It Works
To load cards, open the locking strap or slightly loosen the paracord.
Slide your cards flat between the front and back plates, then secure again.
Use the thumb cutout to easily push out the card you need.
Bills can be tucked under the rear money clip.
Quick FAQ
How many cards fit inside?
Up to 15 cards according to the manufacturer – in real life, 4 to 8 cards offer the best usability.
How do I remove cards?
Push the desired card out through the thumb cutout; if it feels too tight, slightly loosen the paracord tension.
How much cash can it hold?
Roughly five folded bills fit comfortably under the money clip.
Do I need tools to adjust it?
No. You can adjust the paracord by hand; only a complete re-lacing might require a small tool.
Is it comfortable to carry?
Yes – it works great in front pockets. Carrying it in the back pocket can feel uncomfortable due to its metal build.
Specifications
Length: approx. 10.5 cm
Width: approx. 6.7 cm
Thickness: approx. 1.2 cm
Weight: approx. 68 g
Capacity: up to 15 cards + about 5 bills
Materials: Front plate aluminum (6061-T6), back plate stainless steel (304), paracord (MIL-C-5040 Type III)
Manufactured: Made in USA
Variants from €49.50
Big Idea Design Fountain EDC Pen Silverplated
€159.00
Big Idea Design × Altonaer Silberwerkstatt
For those who still see writing as a little ritual – not just a necessity.
For lovers of fine objects, handwriting enthusiasts, and EDC fans with an eye for detail:
we’ve taken the already outstanding Fountain EDC Pen by Big Idea Design
and given it a refined upgrade in our own silver workshop in Hamburg.
The brass body has been silver-plated, finished with a hand-rubbed surface,
and slightly antiqued in the upper section for a unique contrast of light and shadow.
The result is a pen with depth, character, and that subtle patina we all love in well-made gear.
The mix of matte body, polished grip, and titanium clip makes this fountain pen stylish
without being loud – perfect for your desk or your everyday carry.
Specifications
Brass fountain pen, silver-plated in the Altonaer Silberwerkstatt
Hand-rubbed finish with antique silver toning on the upper section
Matte cap and rear body
Polished grip for a smooth writing feel
Titanium clip
Trayvax Element Wallet Black
€89.00
Color:
Mississipi Mud
Trayvax Element Black
Slim-Wallet made of robust steel and tanned split leather
With integrated bottle opener, lanyard hole, money clip and RFID protection
Slim design for front pocket carry
THE classic from the Trayvax range. A solid, 3D milled steel frame provides an almost indestructible base frame. The metal frame construction also offers a money clip on the back, a large lanyard hole and a bottle opener.
On the frame sits the cover made of oil-tanned leather held in place by thick mil-spec paracord. A number of 3 to 10 cards can be stored safely. The leather cover is cut so that it can be adjusted to the number of cards. The highlight of the Element Wallet is the button lock, which was custom made for these wallets and offers a unique, almost magnetic feeling when closing them. On the upper side of the wallet there is a window cut out in the leather to make your ID, bus or train ticket see through.
Like most Trayvax wallets, the element is also equipped with RFID protection. It is not possible to unintentionally read the data of your cards with a scanner. Especially in big cities or at airports this topic becomes more and more relevant.
Initially, the leather looks quite stiff, which is simply due to the rugged material thickness. If you carry the wallet in your pockets for a while, the cover will adjust perfectly to the inserted amount of cards.
Like all Trayvax products the Element Wallet is completely made in the USA.
.
Technical specifications:
Material:
Leather and metal
Room for:
3-10 cards and 1-5 bills
Includes:
Bottle opener, lanyard hole, money clip
RFID protection:
Yes
Leather:
Split leather, black
Dimensions:
11,43 cm x 7,11 cm x 1,27 cm
Weight:
approx. 180 g
Trayvax Link Leather
€59.90
Color:
Mississipi Mud
Trayvax Link Leather
Practical keychain carabiner
With quick release swivel
Tanned leather and metal with melonite finish
Secure and fast!
Sometimes you just like to have a little more security. Especially in crowded places, it's nice to have your wallet or keychain well secured and yet always have it ready for quick access.
Trayvax offer an surprisingly simple but nonetheless ingenious solution. With the Link, your wallet can be easily attached to the belt loop of the pants or your belt with a small carabiner. On the other side there is a quick release swivel that can be opened with a light pressure on the easy access button. This way you can remove your Trayvax Wallet or keys with just one fast motion and still don't have to worry about losing anything or even being robbed. Hook and swivel are connected by a loop of tanned leather.
Like all Trayvax products, the Link is completely made in the USA.
Technical specifications:
Material:
Leather and metal
Mit:
Quick release swivel
Leder:
Split leather
Trayvax Link Leather
€59.90
Color:
Stealth black
Trayvax Link Leather
Practical keychain carabiner
With quick release swivel
Tanned leather and metal with melonite finish
Secure and fast!
Sometimes you just like to have a little more security. Especially in crowded places, it's nice to have your wallet or keychain well secured and yet always have it ready for quick access.
Trayvax offer an surprisingly simple but nonetheless ingenious solution. With the Link, your wallet can be easily attached to the belt loop of the pants or your belt with a small carabiner. On the other side there is a quick release swivel that can be opened with a light pressure on the easy access button. This way you can remove your Trayvax Wallet or keys with just one fast motion and still don't have to worry about losing anything or even being robbed. Hook and swivel are connected by a loop of tanned leather.
Like all Trayvax products, the Link is completely made in the USA.
Technical specifications:
Material:
Leather and metal
Mit:
Quick release swivel
Leder:
Split leather
Trayvax Element Wallet Raw
€89.00
Color:
Tobacco brown
Trayvax Element Raw
Slim-Wallet made of robust steel and tanned split leather
With integrated bottle opener, lanyard hole, money clip and RFID protection
Slim design for front pocket carry
THE classic from the Trayvax range. A solid, 3D milled steel frame provides an almost indestructible base frame. The metal frame construction also offers a money clip on the back, a large lanyard hole and a bottle opener.
On the frame sits the cover made of oil-tanned leather held in place by thick mil-spec paracord. A number of 3 to 10 cards can be stored safely. The leather cover is cut so that it can be adjusted to the number of cards. The highlight of the Element Wallet is the button lock, which was custom made for these wallets and offers a unique, almost magnetic feeling when closing them. On the upper side of the wallet there is a window cut out in the leather to make your ID, bus or train ticket see through.
Like most Trayvax wallets, the element is also equipped with RFID protection. It is not possible to unintentionally read the data of your cards with a scanner. Especially in big cities or at airports this topic becomes more and more relevant.
Initially, the leather looks quite stiff, which is simply due to the rugged material thickness. If you carry the wallet in your pockets for a while, the cover will adjust perfectly to the inserted amount of cards.
Like all Trayvax products the Element Wallet is completely made in the USA.
.
Technical specifications:
Material:
Leather and metal
Room for:
3-10 cards and 1-5 bills
Includes:
Bottle opener, lanyard hole, money clip
RFID protection:
Yes
Leather:
Split leather
Dimensions:
11,43 cm x 7,11 cm x 1,27 cm
Weight:
approx. 180 g
TrayvaxAxis Wallet
€79.50
Color:
Tobacco brown
Trayvax Ascent Wallet Black Mississippi Mud
simple and rugged design
made in the USA
RFID protected
Simple & clever
Sometimes you need simple and easy solutions for everyday problems. Who wants to carry a huge wallet when all you really need is a handful of cards and a few banknotes? If this problem sounds familiar to you, the Trayvax Asccent could be a solution for you.
At first glance, this model is not so different from the extremely popular Element. But appearances are deceiving: with the Asccent, you're basically dealing with a fairly simple cardholder, which nevertheless has a number of features in typical Trayvay fashion. The leather cover with the beautiful brown tone is firmly connected to the frame made of extremely high-quality steel, resulting in an extremely stable basic construction. On the top of the leather is a small viewing window cut out - for example for your ID or your subway ticket. Here you can store two to three cards. So that you don't have to fumble between your cards, there is another small slot on the back, in which you can easily store several folded bills. Something that is often annoying about cardholders is that accessing a single card is sometimes a bit difficult. Maybe you know it too: you're standing at the checkout, want to pay for something but the credit card just won't separate from your ID and health card. Unpleasant, especially when the line behind you is getting longer and longer and increasingly impatient. Trayvax have built a nylon loop into the Asccent that pulls the cards out from underneath, giving you easy access to the card you want.
Of course, the Asccent is equipped with the typical Trayvax RFID protection, so that no one can read your data secretly. Of course, this model is completely handmade in the USA and will serve you faithfully for a lifetime.
Technical specifications:
Material:
Aircraft grade aluminum and stainless steel
Room for:
up to 15 cards and 1-5 bills
Includes:
bottle opener, money clip, pry bar
RFID protection:
Yes
Dimensions:
10,5 cm x 6,7 cm x 1,2 cm
Weight:
68 g
Trayvax Contour Wallet Black
€175.00
Color:
Tobacco brown
Trayvax Contour Wallet Black
Slim-Wallet made of solid steel and black top-grain oil-tanned leather
With integrated bottle opener, lanyard hole, money clip and RFID protection
Slim design for front pocket carry
The High End Wallet
This wallet is basically the Mercedes of the Trayvax range. The Contour Wallet impresses with a whole array of features.
The base for this cardholder is a two-piece steel frame, which is held together by small Torx screws. Between the two parts of the frame is the locking device for the black oil-tanned leather. Which as always with Trayvax is of outstanding quality and ages beautifully over time. Depending on how many cards you want to carry (13 is the maximum according to the manufacturer), the leather can be adjusted in size. Also on the front side there is a small compartment where folded banknotes can be stored.
Another practical feature is the large viewing window on the bottom. Here, for example, a ticket, your ID or access card can be inserted so that you always have immediate access to it. Also on the bottom is the bottle opener integrated in the frame, as well as a lanyard hole.
Depending on how many cards you carry in the Contour Wallet, the locking pin can be adjusted in its position, so that there is always enough tension on the locking button. By the way, this button lock is specially designed and manufactured by Trayvax and has a certain satisfying fidget factor. The mechanism offers a unique feedback that feels secure and almost magnetic.
If you are looking for a really well thought out wallet with many features and extras, Trayvax Contour Wallet could be just the thing for you.
Technical specifications:
Material:
Leather and stainless steel
Room for:
Up to 10 cards and 10 bills
Includes:
Bbottle opener, lanyard hole
RFID protection:
Yes
Leather:
Top-grain oil-tanned leather, black
Dimensions
9,7 cm x 6,1 cm x 1,3 cm
Weight:
approx. 113g
Variants from €149.00
TrayvaxAxis Wallet Black Frame
€79.50
Color:
Black
Trayvax Ascent Wallet Black Frame
simple and rugged design
made in the USA
RFID protected
Simple & clever
Sometimes you need simple and easy solutions for everyday problems. Who wants to carry a huge wallet when all you really need is a handful of cards and a few banknotes? If this problem sounds familiar to you, the Trayvax Asccent could be a solution for you.
At first glance, this model is not so different from the extremely popular Element. But appearances are deceiving: with the Asccent, you're basically dealing with a fairly simple cardholder, which nevertheless has a number of features in typical Trayvay fashion. The leather cover with the beautiful brown tone is firmly connected to the frame made of extremely high-quality (and in this variant melonite-coated) steel, resulting in an extremely stable basic construction. On the top of the leather is a small viewing window cut out - for example for your ID or your subway ticket. Here you can store two to three cards. So that you don't have to fumble between your cards, there is another small slot on the back, in which you can easily store several folded bills. Something that is often annoying about cardholders is that accessing a single card is sometimes a bit difficult. Maybe you know it too: you're standing at the checkout, want to pay for something but the credit card just won't separate from your ID and health card. Unpleasant, especially when the line behind you is getting longer and longer and increasingly impatient. Trayvax have built a nylon loop into the Asccent that pulls the cards out from underneath, giving you easy access to the card you want.
Of course, the Asccent is equipped with the typical Trayvax RFID protection, so that no one can read your data secretly. Of course, this model is completely handmade in the USA and will serve you faithfully for a lifetime.
Technical specifications:
Material:
Aircraft grade aluminum and stainless steel
Room for:
up to 15 cards and 1-5 bills
Includes:
bottle opener, money clip, pry bar
RFID protection:
Yes
Dimensions:
10,5 cm x 6,7 cm x 1,2 cm
Weight:
68 g
Nottingham Tactical TiButton Smoothie
€179.00
Lead standard / pen length:
Parker = 12,7 cm
|
Lock:
Single Lock
Sleek, solid, and stripped down to the essentials – the Smoothie is the most minimal design in the Nottingham Tactical lineup. Machined from titanium, finished to perfection, and powered by the iconic TiButton mechanism – proudly made in the USA. From the very first click, you’ll get why NTI has reached cult status among EDC fans. Every press feels crisp and mechanical, like a perfectly tuned detent. No fancy milling, no gimmicks – just pure precision engineering. Available in Single Lock or Double Lock configuration: Single Lock: direct, smooth, and effortlessly “fidgety” – perfect if you love that mechanical feedback. Double Lock: adds an extra level of security – slightly firmer, rock-solid in everyday use. The finish? Quietly elegant, timeless, and unapologetically simple. The Smoothie doesn’t scream for attention – it earns it. Built for those who appreciate titanium for its feel, not its flash. For gear lovers who value precision, balance, and tactile perfection. Compatible with three of the most popular refill standards: Parker-Style, Pilot G2, and Fisher Space Pen – so you can dial in exactly the writing experience you want. Made in USA – for an EDC that’s built to last for generations.
Big Idea Design Chaves Fountain EDC Pen
€125.95
Big Idea Design × Chaves – Fountain Pen with Cult Status
Two heavyweights of the EDC scene in one brilliant collab: Big Idea Design and Ramon Chaves created a fountain pen that has everything fans love.
Titanium with a stonewashed finish, the legendary Chaves Skull Clip – and as the highlight, a black Bock nib that makes a striking contrast.
Compact, robust, and ready for daily carry – a true must-have for collectors and everyday writers alike.
Why you’ll want this pen
Legendary Skull Clip – unmistakable Chaves DNA, now on a pen.
Titanium, stonewashed – lightweight, durable, and EDC-ready.
Black Bock nib (EF) – precise writing, gorgeous contrast to the finish.
Deep-carry clip – sits low in your pocket, secure and discreet.
Cap with O-rings – smooth handling without visible threads on the grip.
What’s included
Big Idea Design × Chaves Fountain Pen (Titanium, Stonewashed)
Bock nib (Extra Fine, black)
Converter for bottled ink
1× International ink cartridge
Spare O-rings
Technical details
Material: Grade 5 Titanium
Finish: Stonewashed
Nib: Bock EF, black
Clip: Chaves Skull, deep carry
Cap: Pull-cap with O-rings
Ink: International cartridges & converter (included)
GiantMouse Caplifter / Prybar Silver plated
€109.00
GiantMouse Caplifter / Prybar Silverplated
Bronze
Keychain by adding a split ring
Bottle openerheavily silver-plated in our workshopSpecifications :
Material: Bronze
Thickness: 3/16" (4.8 mm)
Length: 3.07" (78 mm)
Width: 1.3" (33 mm)
Weight: 0.9 oz (25.5 g)
NotoriousEDC Beer Bomb
€109.00
The classic finally available here
Titanium, stonewashed finish, and a look that immediately recalls the shark mouths painted on
American fighter planes of the 1940s – the Beer Bomb is a true statement piece in your EDC.
And the best part: behind the striking design hides a clever set of functions:
Nose – works as a screwdriver when you need to tighten something quickly
Tail – perfect for prying (yes, even paint can lids)
Eye – shaped to hold standard hex bits
Body – of course, its main job: opening bottles like a pro
Dimensions (.25" Beer Bomb)
Length: approx. 7.1 cm
Height: approx. 3.6 cm
Thickness: approx. 6.4 mm
So why is it only now available here?
Because in Germany, a similar model was actually classified by the BKA
(German Federal Criminal Police Office) as a
prohibited weapon. That made things tricky – but we were determined to find a proper solution.
Together with Notorious EDC we developed a 3D-printed inlay
(yes, featuring the Knife Lounge chair) that closes the opening and leaves no room for debate.
Color-matched to the stonewashed titanium, it blends seamlessly with the design.
No risks, no half measures – just a seriously cool and fully functional piece of EDC culture
that you can finally carry with pride.
Key Ring Sterling Silver
€205.00
Pure, understated elegance: this key ring is crafted from solid 925 sterling silver with clean lines and a comfortable weight of 15 g.
With a 3.9 cm diameter it offers generous space without feeling bulky. The standout detail is the refined mechanism: the ring opens via a sturdy lever clasp – simple, practical, secure. No bending, no hassle, just a clear solution in silver.
Made in Germany with extensive handcraft. Timeless silverwork for everyday carry.
Material: 925 sterling silver
Weight: approx. 15 g
Diameter: 3.9 cm
Closure: Lever mechanism
Manufacture: Germany, mostly handcrafted
Key Ring 925/- Sterling Silver
€210.00
Understated elegance in silver: this key ring is crafted from solid 925 sterling silver and impresses with clean lines and well-balanced proportions. With a 3.5 cm diameter it stays discreet, while 17 g give it a reassuring feel in hand.
The precise lever clasp opens and closes flush—comfortable, secure, and without bending the material. A functional solution that complements the restrained design.
Made in Germany with extensive handcraft. An enduring piece of silverwork for everyday use.
Material: 925 sterling silver
Weight: approx. 17 g
Diameter: 3.5 cm
Closure: precise lever mechanism, flush-closing
Manufacture: Germany, mostly handcrafted
Key Ring with Balls 925/- Sterling Silber
€220.00
A key ring that delivers: solid, functional, and made entirely from 925 sterling silver. With a 3.7 cm diameter it offers plenty of space for your keys – and at 17.6 g it has a reassuring heft in hand.
The smart detail: one of the two silver balls (Ø 0.7 cm) unscrews. Slide keys on, screw the ball back on – done. No fiddling, no compromises.
Made in Germany with extensive handcraft. Real silverwork for everyday use – durable, timeless, effortlessly cool.
Material: 925 sterling silver
Weight: approx. 17.6 g
Ring diameter: 3.7 cm
Ball diameter: 0.7 cm
Manufacture: Germany, mostly handcrafted
Big Idea Design Notorious EDC Jot N Pop Ti Pocket Pro Pen
€125.95
In collaboration with Tom Medvedich Titanium pen Compatible with Parker refills Schmidt P900 refill included Length: 12.1 cm, Barrel diameter: 0.97 cm, Grip diameter: 1.16 cm, Weight (empty): 24.9 grams
Carpe Diem EDC Skull Leather Sleeves for Coins & Tempus Fugit Worry Stones
€43.00
Sleeve for the Carpe Diem Coin or Worry StoneLight brown leather with skull inprintmade in USA by Greg Stevens Design
Carpe Diem EDC Porthole Leather Sleeves for Coins & Tempus Fugit Worry Stones
€43.00
Sleeve for the Carpe Diem Coin or Worry StoneLight brown leather with porthole recessmade in USA by Greg Stevens Design
Carpe Diem Sticker Set
€13.00
Carpe Diem Sticker Set
includes 5 stickers with each set
Skull
Carpe Diem tree
Carpe Noctem Coin front side
Carpe Noctem Coin back side
Carpe Diem sticker white writing on clear
Diameter: Cira 7.5 cm
Böker Plus Twista
€29.95
In cooperation with Hansa Jagdausrüstung Aluminum tactical pen With rounded stainless steel insert at the end of the handle (can be used as a glass breaker or kubotan) With standard large-capacity refill Cap with clip
Nottingham Tactical Exotic Series #322 Zirconium Honey Badger
€939.00
TiButton Zirconium Parker Honey Badger
Parker-format refill, 5" (12.7 cm)
Honey Badger pattern in Zirconium with a Zirconium machined clip in matching Honey Badger finish
OilSlick finish
For those who seek the rarest of the rare.
Each piece in this series is a one-of-a-kind creation – machined from rare and often spectacularly patterned materials such as ZircuTi, Damasteel, or Superconductor. Precision-made in the USA, produced in extremely small runs, and finished to a level that makes collectors’ hearts skip a beat. An Exotic isn’t just a pen – it’s a statement for those who value individuality and extraordinary design.
Nottingham Tactical Exotic Series #320 Zirconium Straight Flute with Dots Parker
€939.00
TiButton Zirconium Parker Straight Flute with Dots
Parker-format refill, 5" (12.7 cm)
Straight Flute with Dots pattern and machined clip
Finish: Reverse Cut Blasted & OilSlick
For those who seek the rarest of the rare.
Made from solid zirconium and precision CNC-machined in the USA. Produced in small batches with a meticulous finish that impresses at first glance.