Das Knafs Lander 2 ist ein Design von Ben Petersen. Jetzt kannst Du es mit verschiedenen Griffschalen zu Deiner individuellen Version machen. Außerdem haben wir eine neue Lieferung von Vero Engineering erhalten. Fulcrum Minis und Fulcrums sind wieder da.
Knafs Lander 2 Rebuild Kit Spare parts for the lander knife 2 Includes: All Screws, Spacer, Bearings, Stoppin, Omega Springs, Clip, Clipinsert, Thumb Stud
Vero Engineering Fulcrum Micro Joseph Vero Design smallest Fulcrum of the Vero Fulcrum series Titanium pocket tool with magnetic bit holder with key ring hole and stainless steel double carabiner
Vero Engineering Fulcrum Micro Joseph Vero Design smallest Fulcrum of the Vero Fulcrum series Titanium pocket tool with magnetic bit holder with key ring hole and stainless steel double carabiner
Vero Fulcrum Mini
made of titanium
with clip and micro bits
Mini Verison
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
Included are five micro bits:
1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
9 cm
Width:
1.5 cm
Material:
titanium
Weight:
29 g (2 Bits loaded)
Finish:
Raw
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Vero Fulcrum Mini Blackwash
made of titanium
with clip and micro bits
Mini Verison
Blackwash Finish
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
Included are five micro bits:
1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
9 cm
Width:
1.5 cm
Material:
titanium
Weight:
29 g (2 Bits loaded)
Finish:
Blackwash
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Vero Fulcrum Blackwashed (Full Size Version)
Prybar and bit holder
made of titanium
with clip and micro bits
DLC coated and stonewashed
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips.
Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
13.2 cm
Width:
1.65 cm
Material:
titanium
Weight:
42 g
Finish:
Blackwashed
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Vero Fulcrum (Full Size Version)
Prybar and bit holder
made of titanium
with clip and micro bits
If it gets stuck...
Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose?
Thats a job for Joseph Vero!
(Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade.
Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time.
By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold.
To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips.
Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.
Technical specifications:
Total length:
13.2 cm
Width:
1.65 cm
Material:
titanium
Weight:
42 g
Finish:
Clips are anodized in different colors
Accessories:
Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings
Bestech VK-Core Vulpex Knife Design Handle and blade made of 14C28NComes with a Kydex SheathThe fox as a fixed The VK-Core is the first production-fixed design by custom knifemaker Steven Kempa of Vulpex Knives. The design is based on a long series of handcrafted knives in which Steven has paid meticulous attention to constantly improving the hand position and usability in the field. Each prototype has been excessively tested, sometimes to the point of destruction. The VK Core is the result of years of development and is produced exclusively for Vulpex Knives by Bestech.
This all-steel knife feels sensationally good in the hand, which is not only due to its ingenious shape but also to the all-round beveling of the edges. The speedholes in the handle ensure a comfortable weight and also offer the option of being able to pull the knife out of the Kydex sheath very quickly.
Steven deliberately chose the very fine-grained Sandvik 14C28N for the material. This material can only be finely ground and is extremely resistant to rust. In addition, this steel is very robust, which makes it absolutely predestined for an all-rounder fixed like the VK Core. The Core is clearly a Vulpex knife: the typical design language, which has already delighted fans of the VK Void, can be found in this knife at first glance. The iconic copper pin is a must, as is the great logo with the fox.
Bestech VK-Core Vulpex Knife Design Handle and blade made of 14C28NComes with a Kydex SheathThe fox as a fixed The VK-Core is the first production-fixed design by custom knifemaker Steven Kempa of Vulpex Knives. The design is based on a long series of handcrafted knives in which Steven has paid meticulous attention to constantly improving the hand position and usability in the field. Each prototype has been excessively tested, sometimes to the point of destruction. The VK Core is the result of years of development and is produced exclusively for Vulpex Knives by Bestech.
This all-steel knife feels sensationally good in the hand, which is not only due to its ingenious shape but also to the all-round beveling of the edges. The speedholes in the handle ensure a comfortable weight and also offer the option of being able to pull the knife out of the Kydex sheath very quickly.
Steven deliberately chose the very fine-grained Sandvik 14C28N for the material. This material can only be finely ground and is extremely resistant to rust. In addition, this steel is very robust, which makes it absolutely predestined for an all-rounder fixed like the VK Core. The Core is clearly a Vulpex knife: the typical design language, which has already delighted fans of the VK Void, can be found in this knife at first glance. The iconic copper pin is a must, as is the great logo with the fox.
Bestech VK-Core Vulpex Knife Design Handle and blade made of 14C28NComes with a Kydex SheathThe fox as a fixed The VK-Core is the first production-fixed design by custom knifemaker Steven Kempa of Vulpex Knives. The design is based on a long series of handcrafted knives in which Steven has paid meticulous attention to constantly improving the hand position and usability in the field. Each prototype has been excessively tested, sometimes to the point of destruction. The VK Core is the result of years of development and is produced exclusively for Vulpex Knives by Bestech.
This all-steel knife feels sensationally good in the hand, which is not only due to its ingenious shape but also to the all-round beveling of the edges. The speedholes in the handle ensure a comfortable weight and also offer the option of being able to pull the knife out of the Kydex sheath very quickly.
Steven deliberately chose the very fine-grained Sandvik 14C28N for the material. This material can only be finely ground and is extremely resistant to rust. In addition, this steel is very robust, which makes it absolutely predestined for an all-rounder fixed like the VK Core. The Core is clearly a Vulpex knife: the typical design language, which has already delighted fans of the VK Void, can be found in this knife at first glance. The iconic copper pin is a must, as is the great logo with the fox.