Vero Fulcrum (Full Size Version) Glow Rhino with Tritium Inlay Tritium is self-powered and self-reliant. It doesn't require an outside charge and has a half-life of 12.23 years.Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Blue made of titanium with clip and micro bits Mini Version Bluewashed Finish If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? That's a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well-thought-out answer to these problems in the form of the Fulcrum. The pry bar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. basically you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Bluewashed Finish Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Pitted Blackwashed made of titanium with clip and micro bits Mini Version Pitted Pattern and Blackwashed Finish If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? That's a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well-thought-out answer to these problems in the form of the Fulcrum. The pry bar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. basically you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Blackwashed Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini DLC made of titanium with clip and micro bits Mini Verison DLC Finish If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: DLC coated Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Frag Pattern Blackwashed made of titanium with clip and micro bits Mini Version Frag Pattern and Blackwashed Finish If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? That's a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well-thought-out answer to these problems in the form of the Fulcrum. The pry bar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. basically you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Blackwashed Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum DLC Limited (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: DLC  Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Blackwash made of titanium with clip and micro bits Mini Verison Blackwash Finish If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Blackwash Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Frag Pattern made of titanium with clip and micro bits Mini Version Frag Pattern If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? That's a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well-thought-out answer to these problems in the form of the Fulcrum. The pry bar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. basically you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Raw Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini made of titanium with clip and micro bits Mini Verison If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Raw Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum Mini Pitted made of titanium with clip and micro bits Mini Version Pitted Pattern If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? That's a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well-thought-out answer to these problems in the form of the Fulcrum. The pry bar is milled entirely from lightweight titanium, weighs a mere 29 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. basically you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. Included are five micro bits: 1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 9 cm  Width: 1.5 cm Material: titanium Weight: 29 g (2 Bits loaded) Finish: Raw Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Fulcrum (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Clips are anodized in different colors Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings

Vero Engineering Vero Fulcrum Mini Brass with DLC Clip Full titanium pocket tool with magnetic bit holder in clip can be used as bit driver with 5 Wiha micro bits: T6 T8 T10 Philips Slot with microfiber fabric

Vero Fulcrum Blackwashed (Full Size Version) Prybar and bit holder made of titanium with clip and micro bits DLC coated and stonewashed If it gets stuck... Open the after-work beer?Coffee tipped over the keyboard and now hastily unscrew the keys?Open a paint bucket?Cut open a package and no knife at hand?The blade axis of your pocket knife has come loose? Thats a job for Joseph Vero! (Most) knives are not made for prying. Therefore, Prybars are becoming increasingly more popular in the EDC scene. With these little pocket tools, you can pry at will without having to worry about a knife blade. Vero Engineering has come up with an extremely well thought-out answer to theese problems in the form of the Fulcrum. The prybar is milled entirely from lightweight titanium, weighs a mere 42 grams and is hardly noticeable in the pocket thanks to the flat clip. The most brilliant thing about the Fulcrum is the possibility of carrying two micro-bits by held by two O-rings, which can be inserted on the top of the clip. baslcially you not only have a pry tool, but also a bit holder at the same time. By the way, the bits come from Wiha in Germany. This owner-managed company, is one of the leading tool manufacturers in the world and stands with its name for the highest quality. In the holder for the bits sits a small neodymium magnet, which ensures a secure hold. To bring a little color into play, the Fulcrum Prybars are available with different colored anodized clips. Included are five micro bits:1 x T61 x T81 x T101 x cross slot1 x slot+ Also comes with an additional set of O-rings and a microfiber cloth.    Technical specifications: Total length: 13.2 cm  Width: 1.65 cm Material: titanium Weight: 42 g Finish: Blackwashed Accessories: Micro bits T6,T8,T10, Phillips and cross slotted screwdrivers, O-rings