Spyderco Delica 4 Lightweight Micro-Melt PD#1 Black Blade
with Plain-Edge blade made of Micro-Melt PD#1
With fourfold convertible clip
Handle material: red FRNBacklock
Spyderco Police 4 Lightweight Micro-Melt PD#1 Black Blade limited Sprint Run version of the Police 4 Lightweight full-size pocket knife weighing only 120g FRN handle and Micro-Melt PD#1 steel blade
Spyderco Tenacious R.I.L. Blue Titanium PlainEdge Titanium handle with framelock lockBlade made of 8Cr13MoV with satin finishWith four-way reversible handle Spyderco Tenacious Titanium Blue - A classic in a new lookThe Tenacious is one of Spyderco's best-known and most popular knives for good reason. Now this classic is available in a really cool version: with titanium handle scales and a super sturdy Reeve Integral Lock (R.I.L.), which ensures absolute reliability thanks to the stainless steel insert.The titanium handle scales are not only robust, but also cleverly designed. The inside has been milled so precisely that the weight remains nice and low. Then there's the bright blue anodized finish, which really makes the knife stand out.And what's really practical: You can mount the wide pocket clip in four different positions - depending on whether you want to carry it on the left or right, with the tip up or down.The blade? It's made of 8Cr13MoV stainless steel, flat-ground and has a chic satin finish.
Spyderco Tenacious R.I.L. Blue Titanium Black Blade PlainEdge Titanium handle with framelock lockBlade made of 8Cr13MoV with non-reflective black oxide coating With four-way reversible handle Spyderco Tenacious Titan Black & Blue - A classy upgrade for a classicThe tried-and-tested Tenacious gets an impressive upgrade: With titanium handle scales, a robust Reeve Integral Lock (R.I.L.) and a stainless steel insert, this popular model becomes a particularly high-quality version.But that's not all. The flat-ground blade made from 8Cr13MoV stainless steel is finished with a matt black oxide coating, which not only prevents reflections but also looks great.The wide, four-position clip and the entire handle hardware are also finished in an elegant black to match. These contrasts give the knife a stylish look that perfectly complements the blue anodized titanium handle scales.
Spyderco UKPK UK Penknife Yellow
Magnacut Blade
Lightweight only 48 grams
Yellow FRN handle scales
UKPK goes Salt
It's no big secret that the laws regarding knives and carrying them in public are much stricter in Europe than in the USA. However, Spyderco was one of the first major manufacturers to take on this problem and create a kind of European classic in its own range with the UKPK (UK Penknife), which even meets the very strict laws in the UK.
Here two important factors come together: although you can open the UKPK - thanks to the Spyderholes - one-handed, but the blade is not locked in the open state, but is held by a powerful back spring (similar to a Swiss Army knife). This allows you to carry the UKPK perfectly legally. Yet despite its small size, lack of a lock, and extremely lightweight construction, the UKPK is a highly functional pocket knife. The thin blade proves to be a real cutting devil in everyday EDC use thanks to the raised flat grind and shows that Spyderco really had a cutting tool in mind here and not a folding crowbar. The Magnacut used in this version is extremely corrosion resistant and can therefore be used even under the most unfavorable conditions.
The bright yellow FRN (Fiber Reinforced Nylon) handle scales, which you might no from other salt series knives, do not require steel plates underneath and ensure a construction that is as light as it is strong. At just 48 grams, the UKPK is hardly bulky in your pocket. The deep-carry pocket clip can be mounted on the left or right side, which makes the knife interesting for left-handers as well.
All in all, you get with the UKPK a really highly suitable EDC pocket knife which not only complies with local legislation, but also proves to be a loyal companion.
Spyderco Para Military 2 CPM SPY27 G10 handle CPM SPY27 blade with four-way reversible clipThe EDC Classic
Don't let the name of this absolute classic scare you - this is not a combat knife or any other kind of military stabbing weapon. The Para Military 2 - or PM2 - is one of the most popular and versatile knives Spyderco has in its lineup.
Originally introduced in 2010, this all-around knife has been improved upon over the years, making this cutting tool an absolutely mature design by now.The incredibly ergonomic handle, is designed for maximum control when working with the knife and allows you a variety of ways to wield the blade.
Really great is the so-called Fingerchoil (an indentation at the base of the blade), which makes it possible for you to grip the knife very close to the cutting edge to transfer maximum force to the cutting movement. Thanks to the attached filings (jimping), you have an absolutely secure grip even in this position, and the knife never threatens to slip from your grasp thanks to the rough G10 surface of the handle.
The steel plates are recessed in the handle material and generously milled out to save weight. An absolute highlight of the PM2s is the Compression Lock. At first glance, this locking technology looks like a rear-positioned liner lock - but a closer look reveals that this is not the case. With the Compression Lock, the liner moves between the blade root and the stop pin on the back. To destroy this lock, the steel liner between the blade root and the pin would have to be crushed, which is virtually impossible. This construction makes the Para Military 2 one of the most stable pocket knives the market has to offer.
The blade is made of Spyderco's signature CPM S30V steel, which Sal Glesser was directly involved in developing. The fully raised flat grind provides optimal cutting performance and the fine point allows you to do the finest detail work.
Thanks to the reversible pocket clip on both sides, the knife is ideal for both right and left-handed users, while the large lanyard hole allows you to attach a safety strap.
Spyderco Para 3 Brown Canvas Micarta CPM Cru-WearPerfect balance of compact size, low weight, permissible blade size and comprehensive cutting performance Handle made of brown Micarta CPM Cru-Wear blade (unpolished) with four-way reversible clip
Spyderco MicroJimbo Black Blade
Compact version of the popular Yojimbo
Made from CPM-S-30V steel
Made in the USA
The MicroJimbo brings together all the essential features of Michael Janich's celebrated Yojimbo 2 design in a handy pocket knife. The critical dimensions are the same as its larger counterpart, giving you an ultra-compact folding experience that unfolds and handles just as smoothly.
The Wharncliffe blade, made of powdered metallurgy CPMS30V, measures 6.4 cm. The flat grind ensures improved tip strength. The blade is supported by a robust Compression Lock mechanism and stainless steel liners embedded in textured G-10 handle scales.
The reversible Tip-Up Clip offers versatile carrying options.
This pocket knife is Made in the USA – a handy masterpiece that combines innovation and functionality at the highest level.
Spyderco Para Military 2 Salt Black G10 CPM Magnacut Black Blade G10 handle CPM Magnacut blade with DLC coatingwith four-way reversible clipThe EDC Classic
Don't let the name of this absolute classic scare you - this is not a combat knife or any other kind of military stabbing weapon. The Para Military 2 - or PM2 - is one of the most popular and versatile knives Spyderco has in its lineup.
Originally introduced in 2010, this all-around knife has been improved upon over the years, making this cutting tool an absolutely mature design by now.The incredibly ergonomic handle, is designed for maximum control when working with the knife and allows you a variety of ways to wield the blade.
Really great is the so-called Fingerchoil (an indentation at the base of the blade), which makes it possible for you to grip the knife very close to the cutting edge to transfer maximum force to the cutting movement. Thanks to the attached filings (jimping), you have an absolutely secure grip even in this position, and the knife never threatens to slip from your grasp thanks to the rough G10 surface of the handle.
The steel plates are recessed in the handle material and generously milled out to save weight. An absolute highlight of the PM2s is the Compression Lock. At first glance, this locking technology looks like a rear-positioned liner lock - but a closer look reveals that this is not the case. With the Compression Lock, the liner moves between the blade root and the stop pin on the back. To destroy this lock, the steel liner between the blade root and the pin would have to be crushed, which is virtually impossible. This construction makes the Para Military 2 one of the most stable pocket knives the market has to offer.
The blade is made of Spyderco's signature CPM S30V steel, which Sal Glesser was directly involved in developing. The fully raised flat grind provides optimal cutting performance and the fine point allows you to do the finest detail work.
Thanks to the reversible pocket clip on both sides, the knife is ideal for both right and left-handed users, while the large lanyard hole allows you to attach a safety strap.
Spyderco Para 3 Lightweight Salt CPM Magnacut
Every gram counts
only 70 grams light
good grip
Deep-carry clip
Spyderco have added a popular model to their ultra-lightweight range with the Para 3 Lightweight. The already brilliant Para 3 has been put on a radical diet - with phenomenal results.
The new Lightweight version with the slightly rounded handle, is fantastic in the hand. With its sensational 70 grams, you can carry it in your pocket almost unnoticed. The handle scales in this version are made of the lightweight FRN plastic (Fiber Reinforced Nylon) that Spyderco has been using for a long time. This material is very robust and offers an extremely good grip. So you can work with the knife even with wet hands safely and accurately, without the one the Para 3 to slip.
For the blade, the manufacturer from Colorado relies on the Magnacut steel, which is also used for example in the UKPK. This nitrogen-alloyed steel offers excellent prerequisites for a good all-round steel. On the one hand, it takes on enormous sharpness and can still be resharpened easily. In addition, this alloy is absolutely insensitive to rust.
As with the normal Para 3, the popular Compression Lock is used to lock the blade, which can be easily and safely operated via the back of the blade.
Together with the deep-carry clip, you have a knife here that exudes a real tool character and simply wants to be used. The light weight, versatile steel and fantastic hand placement make this cutting tool a real workhorse.
So out of the cabinet and into life.
Spyderco MicroJimbo
Compact version of the popular Yojimbo
Made from CPM-S-30V steel
Made in the USA
The MicroJimbo brings together all the essential features of Michael Janich's celebrated Yojimbo 2 design in a handy pocket knife. The critical dimensions are the same as its larger counterpart, giving you an ultra-compact folding experience that unfolds and handles just as smoothly.
The Wharncliffe blade, made of powdered metallurgy CPMS30V, measures 6.2 cm. The flat grind ensures improved tip strength. The blade is supported by a robust Compression Lock mechanism and stainless steel liners embedded in textured G-10 handle scales.
The reversible Tip-Up Clip offers versatile carrying options.
This pocket knife is Made in the USA – a handy masterpiece that combines innovation and functionality at the highest level.
Spyderco Para 3 Lightweight Pink Black Blade
Every gram counts
only 70 grams light
good grip
Deep-carry clip
Spyderco have added a popular model to their ultra-lightweight range with the Para 3 Lightweight. The already brilliant Para 3 has been put on a radical diet - with phenomenal results.
The new Lightweight version with the slightly rounded handle, is fantastic in the hand. With its sensational 70 grams, you can carry it in your pocket almost unnoticed. The handle scales in this version are made of the lightweight FRN plastic (Fiber Reinforced Nylon) that Spyderco has been using for a long time. This material is very robust and offers an extremely good grip. So you can work with the knife even with wet hands safely and accurately, without the one the Para 3 to slip.
For the blade, the manufacturer from Colorado relies on the CTS BD1N steel, which is also used for example in the UKPK. This nitrogen-alloyed steel offers excellent prerequisites for a good all-round steel. On the one hand, it takes on enormous sharpness and can still be resharpened easily. In addition, this alloy is absolutely insensitive to rust.
As with the normal Para 3, the popular Compression Lock is used to lock the blade, which can be easily and safely operated via the back of the blade.
Together with the deep-carry clip, you have a knife here that exudes a real tool character and simply wants to be used. The light weight, versatile steel and fantastic hand placement make this cutting tool a real workhorse.
So out of the cabinet and into life.
Spyderco Para 3 Lightweight Pink
Every gram counts
only 70 grams light
good grip
Deep-carry clip
Spyderco have added a popular model to their ultra-lightweight range with the Para 3 Lightweight. The already brilliant Para 3 has been put on a radical diet - with phenomenal results.
The new Lightweight version with the slightly rounded handle, is fantastic in the hand. With its sensational 70 grams, you can carry it in your pocket almost unnoticed. The handle scales in this version are made of the lightweight FRN plastic (Fiber Reinforced Nylon) that Spyderco has been using for a long time. This material is very robust and offers an extremely good grip. So you can work with the knife even with wet hands safely and accurately, without the one the Para 3 to slip.
For the blade, the manufacturer from Colorado relies on the CTS BD1N steel, which is also used for example in the UKPK. This nitrogen-alloyed steel offers excellent prerequisites for a good all-round steel. On the one hand, it takes on enormous sharpness and can still be resharpened easily. In addition, this alloy is absolutely insensitive to rust.
As with the normal Para 3, the popular Compression Lock is used to lock the blade, which can be easily and safely operated via the back of the blade.
Together with the deep-carry clip, you have a knife here that exudes a real tool character and simply wants to be used. The light weight, versatile steel and fantastic hand placement make this cutting tool a real workhorse.
So out of the cabinet and into life.
