Filter
Available
Knafs Lander 3
Handle Color: Horizon Blue
Knafs Lander 3Ben Petersen Design Fast-swap open-source G10 handle scales S35VN DropPoint blade

€160.00*
Ensure 160 bonus points
Available
Knafs Lander 3
Handle Color: Black
Knafs Lander 3Ben Petersen Design Fast-swap open-source G10 handle scales S35VN DropPoint blade

€160.00*
Ensure 160 bonus points
Available
Knafs Loaded Tool Burrito 
Knafs Loaded Tool Burrito 13-in-1 tool set for knife care Tool bagwith elastic bands and a zip pocket Designed in the USA What is included? Bit driver with Wiha Torx bits Aluminium ruler and knife angle finder Leather puller strap for pocket knives Tuf-Glide knife lubricating stick Vibra-tite blue knife thread lock Mango Sucker Mini pocket knife sharpener Polishing cloth Pry spudger tool Marker (as a knife sharpening aid) Pencil 

€175.00*
Ensure 175 bonus points
Available
Knafs Patch Americana Chenille
Knafs Patch Americana Chenille Knafs Logo patch for the release of Knafs Lander 3with flap fastener on the back Size: 8,3 x 5 cm Designed in the USA

€10.00*
Ensure 10 bonus points
Available
Knafs Lander 2 
Handle Color: Grün
Knafs Lander 2 Ben Petersen Design Fast-swap open-source G10 handle scales S35VN blade

Variants from €165.00*
€177.00*
Ensure 177 bonus points
Available
Knafs Lander 2 Scales G10
Color: OD Green
Knafs Lander 2 Scales G10 Fast-Swap Scales for the Lander 2 EDC Knife Material: G10 needed tools Torx tool for knife

€26.00*
Ensure 26 bonus points
Available
Knafs Lander 2 Scales Aluminum
Color: Solar Flare - Red
Knafs Lander 2 Scales Aluminum Fast-Swap Scales for the Lander 2 EDC Knife Material: Aluminum needed tools Torx tool for knife

€75.00*
Ensure 75 bonus points
Available
Knafs Lander 2 Rebuild Kit 
Version: Black
Knafs Lander 2 Rebuild Kit Spare parts for the lander knife 2 Includes: All Screws, Spacer, Bearings, Stoppin, Omega Springs, Clip, Clipinsert, Thumb Stud

€25.00*
Ensure 25 bonus points
Available
Knafs Lander 2 Black
Handle Color: Black
Knafs Lander 2 BlackBen Petersen Design Fast-swap open-source G10 handle scalesS35VN blade

€165.00*
Ensure 165 bonus points
Available
Knafs Lander 2 Blue
Handle Color: Blue
Knafs Lander 2 Ben Petersen Design Fast-swap open-source G10 handle scales S35VN blade

€165.00*
Ensure 165 bonus points
Available
Knafs polishing cloth
Knafs polishing clothperfect to remove fingerprints or light dirtwith Knafs logodimensions approx 15 x 15 cm

€1.90*
Ensure 2 bonus points
Not available
Knafs Lulu - Fixed Blade Knife
Finish: Black
Knafs Lulu - Fixed Blade KnifeDesigned by Ben Petersenmade in Michigan USAMangacut steel bladewith KydexSheath and belt adapterDesigned in Utah and carefully crafted at White River Knife & Tool in Michigan, the knife combines impressive cutting qualities with the charming character of a Nordic Puukko knife.  The Lulu features premium MagnaCut steel, highly regarded by knife enthusiasts for its outstanding corrosion resistance and hardness. It is ergonomically designed to make the handle and blade ideal for even the most demanding jobs. In addition, the Lulu comes with a Kydex sheath and belt adapter, so it's ready to go for your next camping or hiking adventure.A special extra: With the Lulu, you also get an open source file for the handle scales. This gives you the possibility, for example, to design your own handle shells according to your wishes..

€296.00*
Ensure 296 bonus points

Available
Knafs Lander 1 Scales - Good Vibes
Knafs Lander 1 Scales - Good Vibes for your KNAFS Lander 1 (knife not included) Material: G10 What you need to change: Torx tool for knivesScrew lock

€38.50*
Ensure 39 bonus points
Available
Knafs Lulu - Fixed Blade Knife
Finish: Raw
Knafs Lulu - Fixed Blade KnifeDesigned by Ben Petersenmade in Michigan USAMangacut steel bladewith KydexSheath and belt adapterDesigned in Utah and carefully crafted at White River Knife & Tool in Michigan, the knife combines impressive cutting qualities with the charming character of a Nordic Puukko knife.  The Lulu features premium MagnaCut steel, highly regarded by knife enthusiasts for its outstanding corrosion resistance and hardness. It is ergonomically designed to make the handle and blade ideal for even the most demanding jobs. In addition, the Lulu comes with a Kydex sheath and belt adapter, so it's ready to go for your next camping or hiking adventure.A special extra: With the Lulu, you also get an open source file for the handle scales. This gives you the possibility, for example, to design your own handle shells according to your wishes..

€296.00*
Ensure 296 bonus points
Not available
Available
Knafs Aluminium Ruler + Knife Angle Finder
Knafs aluminum ruler and grinding angle finder Includes Lanyard Hole  Sanding angles: 15°, 20°, 25°, 30°, 35° and 40°. Material: 6AL4V Titanium 15.24 cm (6 inches) Weight: 32.7 grams Over the top A ruler should be missing in no Feddermappe - that much is certain times. Lightweight aluminum is there certainly the material of choice for us EDC fans. The ingenious thing about this ruler are the milled teeth at the ends: here you can determine the angle of the cutting bevel by putting on the blade of your pocket knife. This allows you to keep the original angle when resharpening and not accidentally widen the bevel (which usually does not look so nice, especially with somewhat thicker blades). The scaling of the aluminum Ruler is held in centimeter and inch and thus absolutely internationally positioned..

€18.00*
Ensure 18 bonus points
Available
Knafs Lander 1 Natural G10
Knafs Lander 1 Natural G10 Ben Petersen design. Version with 14C28N steel- version with a blackwash finish. With fast-swap shells We have a touchdown Maybe you remember Ben Peterson, who provided great, informative videos on Blade HQ's YouTube channel for years? Exactly this Ben Peterson has made himself independent some time ago with his brand "Knafs"  (American gibberish for "Knives")and landed with the WE Knife Banter and the Civi Baby Banter two absolute hits. With the Lander now comes the first own knife under the Knafs label. The Lander is not only a great EDC pocket knife, but also a tribute to the first lunar landing and the used Lander module. I wonder if this pocket knife would be part of Neil Armstrong's standard equipment today? A special feature of the Lander is that you can change the handle scales of the knife without having to disassemble the entire construction. You simply loosen the two screws on the outside and can change the handle scales. By the way, the Lander is manufactured by QSP..

€96.00*
Ensure 96 bonus points
Available
Knafs - Bit Driver - Wiha Torx Bits 
Knafs - Bit Driver - Wiha Torx Bits mobile knife repair toolkit with bits from Wiha with magnetic channels for the interchangeable bits O-rings as security Ben Petersen (from KNAFS) has long had the dream of developing a bit adapter for knives. However, it should not be an ordinary bit driver, but exactly the one he always wanted to have. When he started with pocket knives, he bought the cheapest Torx holder with the cheapest bits at the hardware store. The plastic tool was impractical and the bits bent quickly. He then switched to a blue box adapter, but quickly realized that having a bit in the middle is important and using a box as a screwdriver is frustrating. There are other adapters with bits in the handle, but they are often bulky and confusing. Ben wanted a portable toolkit that was ready to go at a moment's notice - when traveling, on a desk, or for repairs. He wanted the Torx bits to be visible. That's why he designed the Knafs Bit Adapter with Wiha Torx bits. This knife repair tool meets the exact requirements Ben had for a bit adapter for knives. It's a portable, user-friendly and practical tool for knife repairs and more. Wiha bits are stored in magnetic recesses on the outside of the adapter for quick access. O-rings hold the bits securely in place. End cap is aluminum and features an internal bearing for clean control during use. Jimping and knurling provide grip. The design of the adapter is inspired by the Saturn V rocket and is said to be ready for launch. 

€32.00*
Ensure 32 bonus points
Available
Knafs Lander 1 Scales Cosmo Kitty Crew
Knafs Lander 1 Scales Cosmo Kitty Crew Betsy Ross Design Quick change scales with Cosmo-Kitty chasing a knife for your KNAFS Lander 1 EDC Knife Material: G10 What you need to change: Torx tool for knives Screw lock

€38.50*
Ensure 39 bonus points
Not available
Knafs Lander 1 Rebuild Kit Black
Version: Black
Knafs Lander 1 Rebuild Kit BlackSpare parts for the lander knife Includes:P0050 Scale screw - Qty. 4 P0051 Clip screw - Qty. 4 P0052 Pivot point - Qty. 1 P0053 Pivot screw - qty. 1 P0054 Pocket clip - Qty. 1 P0055 Thumb bolt - Qty. 1 P0056 Frame screw - Qty. 4 P0057 Clip insert - Qty. 1 P0058 Stop pin - qty. 1 P0059 Ceramic bearing - Qty. 2 P0060 Barrel spacer - qty. 2

€18.00*
Ensure 18 bonus points

Available
Knafs Lander 1 Green Micarta 
Knafs Lander 1 Green Micarta Ben Petesen design  contoured Micarta handle with Fast Swap Scales Sandvik 14C28N blade

€102.00*
Ensure 102 bonus points
Available
Knafs Patch What Is Up Guys
Knafs PVC Patch Space Kitty  made of PVC with flap fastener on the back Size: 5 x 2,5cm Designed in the USA

€8.50*
Ensure 9 bonus points
Available
Knafs PVC Patch Space Kitty 
Knafs PVC Patch Space Kitty Space kitty patch made of PVC with flap fastener on the back Size: 5 x 2,5cm Designed in the USA

€12.00*
Ensure 12 bonus points
Available
Knafs Patch Black Logo
Knafs Patch Black Logo Knafs Logo patch made of PVC with flap fastener on the back Size: 5 x 2,5cm Designed in the USA

€8.50*
Ensure 9 bonus points
Available
Knafs Burrito Grande 
Knafs Burrito Grande Knife storage roll with corner eyelets for hanging with velcro fastener for patches made of waxed canvas with different sized elastic bands For:  17 knives in the main pocket 8 pens or screwdrivers 4 additional tools Dimensions:  Closed: 34 x 16 cm  Opened: 34 x 75 cm Designed in the USA

€73.00*
Ensure 73 bonus points